Overview
The Allen-Bradley 1783-ETAP1F is an Ethernet I/P Switch used for industrial Ethernet I/P communication. This module has Two (2) 10/100 Mbps, auto-negotiating copper ports and One (1) Fiber Optic interface that supports 100 Mbps in full duplex operation. This device support horizontal or vertical installation orientation using a standard DIN rail.
24 hour online service
Sales manager : Vicky // RFQ E-mail : sales7@apterpower.com
Phone/WhatsApp : +8618030175807 // Skype : live:2435aba439730baa
keywords: 1783 etap1f;allen bradley 1783 etap1f;Allen Bradley 1783-ETAP1F;1783-ETAP1F datasheet;1783-ETAP1F pdf;1783-ETAP1F manual
Technical specifications for 1783-ETAP1F
|
Manufacturer |
Rockwell Automation |
|
Brand |
Allen-Bradley |
|
Part Number |
1783-ETAP1F |
|
Status indicators |
OK / Link1 / Link 2 indicators |
|
Power Supply Input |
20.4…27.6V DC |
|
Installation Orientation |
Horizontal / Vertical |
|
Installation |
DIN Rail / Panel Mount |
|
Supported Topologies |
Linear, Star |
|
Transmission speed |
10/100 Mbps |
|
Fiber Optic Connector |
LC Connector |
|
No. Of Fiber Ports |
One (1) |
|
No. of Copper Ports |
Two (2) |
|
Total No. of Ports |
Three (3) |
|
Module Type |
Ethernet Tap Module |
product details
The Allen-Bradley ETAP1F is an industrial networking device used for Ethernet I/P networks. This product is essentially an Ethernet switch that is built with Two (2) Copper Ports and One (1) Fiber Optic interface. This module is ideally used for linking Allen-Bradley devices such as controllers, communication and visualization devices for implementation of an industrially approved automation system.
The dual copper ports of the 1783-ETAP1F supports 10/100 Mbps with auto-negotiation function and supports full or half duplex modes while the single fiber optic ports of the 1783-ETAP1F is capable of 100Mbps also however, it supports longer communication distance with higher immunity to electrical noises and disturbances.
The 1783-ETAP1F is an externally mounted switch which does not require backplane for installation however, an appropriate enclosure is required to house the device for protection to industrial elements that may damage the module. The power supply requirement of the 1783-ETAP1F is 24VDC (nominal) with applicable range of 20.4…27.6V DC. This device may be mounted using a standard DIN rail or by direct mounting to the enclosure's mounting plate. It supports horizontal and vertical mounting orientations with minimum clearances of 7.62 cm (3 in.) of space on the bottom of the tap and 2.54 cm (1 in.) of space on the remaining sides of the tap. For Fiber cable entry, at least 5.08 cm or 2 inches is recommended to comply with the necessary bending radius of the Fiber Optic cable.
Frequently asked questions
1.How to set the I/P address of the 1783-ETAP1F?
I/P address can be set in different ways. It may set using the provided DIP switches, Using RSLogix 5000 or Studio 5000 Logix Designer, RSLinx Classic, DHCP server or using the BOOTP tool.
2.Does this Ethernet device include a Fiber port?
Yes, this version of ETAP has One (1) Fiber Optic port.
3.What is the required Fiber Optic connector for this device?
The Fiber Optic cable must have a duplex LC connector to be able to establish connection with the device.
Your Dedicated Partner for Success.
At PLC Leader, you'll work with a dedicated account manager focused on your unique needs. We prioritize quality, speed, and cost-effectiveness, ensuring transparent communication and timely solutions. Benefit from rapid global delivery via trusted carriers like UPS, FedEx, and DHL. Our extensive inventory and strong supplier relationships guarantee competitive pricing and uncompromising quality on every part.
Is Allen Bradley 1783-ETAP1F not the part you are wanting?
Check out the rest of our website to see what else we have to offer!
