Emerson

Emerson DeltaV, Ovation and EPRO Automation Parts

Emerson spare parts span different systems: DeltaV DCS for process control, DeltaV SIS for safety instrumented functions, Ovation for power and water control, and EPRO / AMS for rotating-equipment monitoring. Their controllers, safety solvers, I/O modules, sensors and measurement cards are not interchangeable across platforms.

We source hardware against its complete manufacturer part number. Identify the installed system and hardware revision first; include the mating carrier, terminal block or sensor converter where the part depends on one.

First 1234567 Last

DeltaV, Ovation and EPRO: Match the Installed System

Product family Typical hardware Compatibility considerations
DeltaV DCS Process controller, I/O card, carrier and network equipment DeltaV version, I/O family and matching carrier or terminal hardware
DeltaV SIS SLS 1508 safety logic solver and SIS termination equipment Safety-system release, solver identification and simplex or redundant arrangement
Ovation DCS OCR controller, I/O and cabinet interfaces Ovation controller generation, revision and installed I/O configuration
EPRO / AMS PR6423 probe, CON signal converter and A6500 / MMS measurement modules Sensor–converter calibration, measurement range and monitoring-card input

DeltaV SIS SLS 1508: Dedicated Safety Hardware

The SLS 1508 executes DeltaV SIS safety logic with 16 configurable I/O channels. Its terminal block, carrier position and redundant or simplex arrangement are part of the installed safety system—not ordinary DeltaV DCS I/O accessories.

SLS 1508 · A Safety logic solver
SLS 1508 · B Redundant partner, where installed

SIS terminal hardware and approved system configuration

A redundant SLS assembly requires matching terminal hardware and the applicable DeltaV SIS release. Identify the complete module marking rather than ordering by the SLS 1508 name alone. View SLS 1508 specifications .

Ovation OCR3000: Power and Water Control Hardware

5X00875G01 identifies an Ovation OCR3000 controller listing. Replacement selection depends on the installed Ovation system, hardware revision, mounting and I/O connections. DeltaV controllers do not serve as direct Ovation spares.

The complete controller label and cabinet configuration should accompany a replacement request. View OCR3000 part details .

Emerson Ovation OCR3000 5X00875G01 gray controller enclosure with ventilation grille and blue latches

Ovation OCR3000 controller enclosure and mounting features.

EPRO Sensors, CON Converters and AMS Measurement Cards

The PR6423 is an eddy-current displacement probe. Its signal is conditioned by a matching CON converter, such as CON011, CON021 or CON041 as specified for the selected probe version. Supported monitoring inputs then use that measurement signal; a probe is not interchangeable with an AMS card or an Ovation I/O module.

PR6423 sensor → Matched CON converter → Monitoring input
Emerson AMS 6500 A6500-UM universal measurement card showing green circuit board and front connector panel

A6500-UM monitoring card for AMS 6500 systems.

A6500-UM is a universal measurement card in the AMS 6500 monitoring system. Its supported application and configured sensor/converter measurement chain must be checked together, including the appropriate card and system configuration.

Browse EPRO sensors and AMS monitoring parts or view the A6500-UM card .

Legacy Brand and Replacement Identification

Emerson Network Power became Vertiv after the business sale in 2016. Historical Network Power rectifiers and UPS equipment should be identified within that product lineage, not classified as DeltaV or Ovation parts.

For DeltaV, identify the controller or SIS release and mating carrier or terminal hardware. For Ovation, include the controller and cabinet references. For EPRO/AMS, identify the full probe, converter and monitoring-card numbers where applicable.

Emerson Parts FAQs

What identifies the correct DeltaV SIS SLS 1508 replacement? +

Match the complete solver label and revision, the installed simplex or redundant terminal block, carrier configuration and DeltaV SIS release. Safety-function validation follows the site's approved maintenance procedure.

Can a CON021 be selected from the PR6423 name alone? +

No. Check the full PR6423 order code, connector type, cable length and the converter's electrical range. The connected monitoring channel must use the corresponding measurement configuration.

Do Emerson-branded parts always belong to the same control platform? +

No. DeltaV DCS, DeltaV SIS, Ovation and EPRO/AMS have different control or measurement roles. Identify the installed platform and full part number before evaluating a replacement.

Request an Emerson Exact-Part Quote

Send the full part number, revision, installed system, required quantity, condition and destination country . Include the matching SIS terminal block, Ovation cabinet part, or EPRO converter/monitor reference when relevant. We will quote supply options against the identified hardware.

Submit Emerson Parts RFQ
 
Hot Tags: Emerson automation parts, Emerson DeltaV DCS, DeltaV SIS SLS 1508, Emerson Ovation OCR3000, Emerson EPRO PR6423, CON021 converter, AMS 6500 A6500-UM, Emerson DeltaV automation parts, Emerson Ovation control modules, Emerson EPRO monitoring parts

As one of the leading emerson manufacturers and suppliers, we warmly welcome you to wholesale discount emerson from our factory. All our products are with high quality and competitive price.

automated storage and retrieval systems, calibration services, control valves

Disclaimer:

PLCleader sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.

PLCleader is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.