Hima

HIMA Safety System Spare Parts

HIMA control systems include HIMax modular hardware, HIMatrix compact and remote I/O controllers, and HIQuad X rack-based equipment. Installed HIQuad and H41q/H51q systems may also require older F-series boards. We help buyers source identified HIMA controllers, I/O cards, communication parts and power-related spares.

Choose the relevant hardware category or send us an exact part number. A controller family is not a replacement specification: different generations can have different module, rack and field-connection arrangements.

For a safety-related replacement, use the approved application documentation to establish the required hardware and version.
Check HIMA Part Availability
First 1234 Last

Three HIMA Platforms, Different Hardware Architectures

The right place to start is the controller platform. Each HIMA family uses its own combination of processing hardware, communications, I/O and field connections.

HIMax

A modular, fault-tolerant safety system with X-series processor, communication and I/O modules. Its hardware range includes dedicated field termination assemblies (X-FTA).

HIMatrix

Compact F30/F35 controllers, modular F60 systems and distributed remote I/O. An integrated controller is not the same type of replacement as a plug-in rack board.

HIQuad X

Rack-based H41X/H51X systems with F-series I/O, processor, communication and power components. Older HIQuad/H41q/H51q equipment requires identification of the installed rack generation.

HIMatrix F35: A Controller, Not a Plug-In I/O Card

Yellow HIMA HIMatrix F35 011 compact safety controller with front connection ports

HIMatrix F35 011 controller.

In a HIMatrix compact installation, the controller contains processing and I/O connections in one housing. Replacing an F35 unit may therefore involve the controller variant, existing field wiring and the approved application project.

HIMA lists multiple F35 variants with different configurations. Use the designation on the installed unit rather than applying one F35 specification to every version.

View HIMatrix F35 011 or browse HIMA processor and power parts.

F3221 and F3236: Same Channel Count, Different Documentation

Both entries are listed by HIMA as 16-channel, 24 VDC digital input modules in the HIQuad X portfolio. The manufacturer's overview marks F3236 with SIL 3; the corresponding SIL field for F3221 is blank. That blank is not a substitute for checking the applicable certificate or safety manual.

Part HIMA Portfolio Entry What the Buyer Must Establish
F 3221 16 digital contact inputs; 24 VDC; no SIL value shown in this overview entry. The module's approved use, protective separation requirements and existing rack arrangement.
F 3236 16 digital contact inputs; 24 VDC; SIL 3 indicated in the overview. The approved safety function, required separation, module revision and installed system configuration.
Do not interchange these boards on channel count alone. The approved circuit and HIMA documentation take precedence over appearance, number of terminals or a generic parts listing.

HIMA technical product overview

Recognizing an Installed F-Series Rack Module

The F3221 has a front connector and a plug-in circuit-board form. This is mechanically different from the integrated HIMatrix controller shown above. For an older rack installation, distinguish the removable board from the rack, associated terminals and system-generation hardware.

Check whether the maintenance requirement is a single failed card or a wider rack fault before ordering multiple parts. The qualified plant team should establish the correct corrective action from diagnostics and the approved maintenance procedure.

View the F3221 input card and explore HIMA I/O modules.

Green HIMA F3221 plug-in input board with grey front connector

F3221 plug-in input module.

Repair a Module or Plan a Platform Migration?

Replace the Same Part

For a like-for-like repair, use the full ordering identity and check the required version against the plant's approved spare-parts record.

Source Legacy Hardware

When an older part is difficult to obtain, its supply status and condition must be checked for that exact item, not inferred from the availability of other F-series modules.

Change Controller Families

Moving from HIQuad to HIMatrix, HIMax or HIQuad X is an engineered migration. I/O mapping, software, field connections and functional safety validation need a separate review.

A system upgrade is not a routine card replacement. Cross-family compatibility must be established from the applicable HIMA engineering documents and the site's approved design.

HIMA Hardware Sourcing and Supplier Information

We quote the identified HIMA part with its offered condition and applicable commercial terms. Availability, dispatch time, origin documentation and warranty are confirmed against the specific offer, rather than assumed for an entire product family.

PLCLeader is an independent spare-parts supplier, not an authorized HIMA distributor or representative. HIMA trademarks and product names belong to their respective owners. About PLCLeader.

HIMA Platform and Replacement Questions

What distinguishes HIMax, HIMatrix and HIQuad X? +

HIMax uses modular X-series components, HIMatrix includes compact and distributed controllers, and HIQuad X uses rack-based hardware including F-series modules. They have different assembly and system requirements.

Does the SIL 3 entry for F3236 also apply to F3221? +

No. The HIMA portfolio lists a SIL 3 value for F3236 but does not give that value in the F3221 row. Determine each module's permitted use from its own safety documentation and the approved installation.

Can an older HIQuad system be upgraded by changing only the controller? +

Do not assume so. Changing platform families may require new I/O arrangements, wiring, application engineering and safety validation. Treat the work as a system migration unless a specific manufacturer-approved procedure establishes otherwise.

Does HIMax use the same field termination hardware as HIQuad X? +

Not as a general rule. HIMax has specified X-FTA assemblies, while HIQuad X has its own rack and terminal hardware. The correct mating parts depend on the actual I/O module and system design.

Is the name F35 alone enough to identify a replacement HIMatrix controller? +

No. HIMA lists several F35 variants. The complete model and hardware version are needed to distinguish their I/O and environmental configurations, followed by a check against the approved project.

Request an Exact HIMA Spare-Part Quote

Send us the full HIMA part number, quantity and destination country. For installed-system repairs, include the controller family, version and a clear nameplate photo. We will confirm the offered condition, availability and terms against the requested item.

Send Your HIMA Part Number

 
Hot Tags: HIMA safety system, HIMA spare parts, HIMax safety controller, HIMatrix controllers, HIQuad X rack system, HIMA F-series modules, HIMA CPU and power modules, HIMA I/O modules, HIMatrix F35 011 controller, HIMA F3221 input module

As one of the leading hima manufacturers and suppliers, we warmly welcome you to wholesale discount hima from our factory. All our products are with high quality and competitive price.

Disclaimer:

PLCleader sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.

PLCleader is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.