Foxboro

Foxboro DCS and I/A Series Controller & FBM Parts

Foxboro I/A Series and EcoStruxure Foxboro DCS spare parts include control processors, Fieldbus Modules (FBMs), baseplates, termination assemblies and communications hardware. The FCP280 executes control with connected FBMs, whereas the FDC280 supports direct integration of specified Ethernet and serial field devices. Their installation and device-interface requirements differ.

We source Foxboro components by complete part number and hardware revision. For an I/O replacement, identify the FBM together with its termination assembly and baseplate. For controllers, identify the existing control network and software release.

First 12345 Last

FCP280 and FDC280 Serve Different Control Architectures

FCP280 runs process control and alarming with connected Foxboro Fieldbus Modules. FDC280 combines control with direct integration of supported Ethernet and serial field devices. Its device-integration role does not require a separate FBM for those connections.

FCP280 · FBM-based I/O

Choose the controller, fieldbus/baseplate and FBMs as a documented system.

FCP280 → Fieldbus / FBMs → Field signals

FDC280 · Device integration

Match the FDC280, its network connection and the configured device protocol.

FDC280 → Configured interface → Field device

Older I/A Series CP installations require a model-specific migration review. A newer control processor is not a universal replacement for every legacy CP. View Foxboro controller families .

FBM202 P0926EQ: Thermocouple and Millivolt Inputs

FBM202 P0926EQ is an eight-channel thermocouple/mV input module. Its channels are independently isolated. A separate isolated reference-junction compensation channel measures termination temperature through a 4-wire 100 Ω platinum RTD at the Termination Assembly.

8 inputs Independent thermocouple/mV channels
1 RTD channel Isolated reference-junction compensation

The relevant I/O family, baseplate and approved TA must match the installed signal arrangement. For specifications specific to this model, see FBM202 P0926EQ product details .

Foxboro FBM202 P0926EQ thermocouple input module with dark blue housing, label and front pin connectors
FBM202 module housing and plug-in connector face.

Check the Baseplate, Cable and Termination Assembly

Foxboro FBM202 P0926EQ connector close-up with two multi-pin sockets and visible P0926EQ 0E label
P0926EQ marking and two multi-pin connector sockets.

The I/O circuit includes the field device, Termination Assembly, termination cable, FBM/baseplate and fieldbus to the control processor. An FBM order number alone does not identify its matching TA or cable.

For a replacement, compare the installed TA designation, connector style, cable and baseplate. The reference-junction RTD is part of the relevant FBM202 termination arrangement, not a substitute for field-wiring checks.

Explore termination assemblies for the remaining connection hardware.

Confirm the Installed Hardware Before Replacing a Module

01 / EXACT ID

Part and revision

Record the complete Foxboro catalog number and any revision marking from the existing module.

02 / CONNECTIONS

I/O and controller

Match the FBM, TA, cable, baseplate and connected controller or control-network interface.

03 / REPLACEMENT

Same part or migration

For a different generation, use the documented migration route and confirm software and wiring changes.

100 Series and 200 Series FBMs: FCP280 supports defined configurations involving either generation, but the corresponding fieldbus port requirements differ. Do not mix 100 Series and 200 Series FBMs on the same FCP280 fieldbus port.

FCP280 product specification and FBM202 product specification .

Foxboro Controller and FBM FAQs

Can an FDC280 be substituted for an FCP280 without changing the I/O architecture? +

No. FCP280 operates with connected FBMs. FDC280 integrates supported devices directly through configured communication interfaces. Check the installed application, I/O and control-network requirements before migration.

Does the FBM202 P0926EQ label identify the required termination cable? +

No. Confirm the installed Termination Assembly, cable and baseplate separately. The module label identifies the FBM, not every field-wiring component connected to it.

Can 100 Series and 200 Series FBMs share one FCP280 fieldbus port? +

No. The FCP280 supports documented configurations using both generations, but each fieldbus port is assigned to one fieldbus type. Review the port, bus speed and required interface hardware before changes.

Request a Foxboro DCS Exact-Part Quote

Send the complete part number, revision, quantity, requested condition and destination . For an installed replacement, include the controller family, FBM and TA markings, cable or baseplate details and readable label photos. We can quote supply options for the identified hardware.

Submit Foxboro Parts RFQ
 
Hot Tags: Foxboro DCS, Foxboro I/A Series, EcoStruxure Foxboro DCS, Foxboro FCP280, Foxboro FDC280, Foxboro FBM202 P0926EQ, Foxboro Fieldbus Modules, Foxboro termination assemblies, Foxboro control processors, Foxboro FBM modules, Foxboro termination hardware

As one of the leading foxboro manufacturers and suppliers, we warmly welcome you to wholesale discount foxboro from our factory. All our products are with high quality and competitive price.

Disclaimer:

PLCleader sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.

PLCleader is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.