Hima CPU/Power Distribution Module

HIMA CPU, Rack Power and Distribution Spares

HIMA legacy safety racks use distinct processor, 5 V logic-supply and power-distribution hardware. Common spare references include F2201 and F8620 CPU modules, F7126 and F7130A power supplies, and F7130-labelled assemblies. The complete part number and installed H41q/H51q or other controller configuration determine the correct replacement; similar F-series numbers do not establish interchangeability.

Replacing a legacy module? Send its full nameplate, rack designation, hardware revision and quantity. For a CPU, include the system software and redundant partner; for power hardware, identify the 24 V input, 5 V supply or distribution circuit and mating rack.
Check Your HIMA Part Number
First 12 Last

Legacy HIMA Modules: CPU, Supply or Distribution?

Older HIMA racks require exact identification of the safety processor and its power path. A CPU module handles application execution, a rack supply converts the incoming DC voltage, and a distribution unit routes or protects the relevant cabinet circuits.

F2201 / F8620 · CPU references

Both appear in legacy HIMA processor listings. Confirm the original station family, complete board label, OS release and associated CPU or bus modules before replacement.

F7126 / F7130A · 5 V supplies

HIMA's H41q/H51q catalog assigns F7126 to H51q and F7130A to H41q. Their 24 V-to-5 V function does not make the rack interfaces identical.

F7130 · Circuit identity

Identify the precise F7130 assembly and its rack connections before treating it as a distribution unit or comparing it with F7130A. The suffix and function matter.

F7126 and F7130A: Different Rack Power Supplies

For HIMA's documented H41q/H51q configurations, these power supplies provide the 5 V logic supply from a 24 VDC input, but they belong to different rack families.

F7126 · H51q
24 VDC input → F7126 → 5 VDC rack supply

The original F7126 data sheet specifies a 10 A output and calls for output-voltage checking when redundant supplies are used.

F7130A · H41q
24 VDC input → F7130A → 5 VDC rack supply

F7130A is listed by HIMA as an H41q supply, with separate CPU/I/O and HIBUS power connections in its product documentation.

F7130 is not automatically F7130A. Match the complete manufacturer label and the actual rack power or distribution function. The presence or absence of the A suffix is not proof of interchangeability.

CPU and Power Module Compatibility by Installed Rack

Requested item Confirmed role or system Critical matching evidence
F2201 / F8620 Legacy CPU/central-processing references Exact assembly number, installed rack or station, software/OS, revision and redundant CPU configuration
F7126 H51q power supply, 24 VDC to 5 VDC H51q rack, connection arrangement, redundant supply state and 5 V output/load
F7130A H41q power supply, 24 VDC to 5 VDC H41q rack, full suffix, connector and CPU/I/O bus supply arrangement
F7130 Legacy F7130 reference: exact power/distribution role must be identified Original label, manufacturer drawing, terminal layout and the installed cabinet circuit
F-PWR 01 / F-PWR 02 HIQuad X: 5 V rack supply / H51X extension-rack watchdog supply H41X/H51X rack designation and whether the required part supplies logic power or the extension watchdog

For field input and output cards, browse HIMA I/O modules; signal cards and connecting cables should not be ordered as replacement CPU or power modules.

Legacy CPU Replacement: F2201 and F8620

F2201 and F8620 are distinct processor references. The installed system's board type, CPU partner, operating-system release and application configuration must be established before purchasing a replacement. Processor identity cannot be inferred from the HIMA logo or a similar front panel.

Board identity

Capture the complete part number, variant and hardware revision from the removed module.

System identity

Record rack model, slot, programming/OS release and any paired CPU or interface board.

Safety validation

Follow the plant-approved backup, replacement and application verification procedure before return to service.

HIMax processors such as X-CPU 01 and X-CPU 31 are different product families; their availability does not make them direct replacements for legacy F-series CPU cards.

HIQuad X Supply and Extension Watchdog

HIMA HIMax modular safety controller rack with multiple plugged modules

Current HIMA platforms use separate modular hardware families. HIMax X-CPU processors, HIQuad X F-CPU modules and classic H41q/H51q parts must be selected against their respective system documentation.

Within HIQuad X, F-PWR 01 supplies 5 VDC at 50 W from 24 VDC. F-PWR 02 is the watchdog supply for an H51X extension rack, not a generic buffer power module.

A system overview or similar module shape cannot establish replacement compatibility with an older F7126 or F7130A.

Cabinet Distribution: K 7217 and Fuse Protection

HIMA K 7217 fuse and power-distribution frame with individual protected circuits

The K 7217 is a separate 19-inch cabinet fuse and distribution assembly, not a processor or a 5 V logic power supply. HIMA specifies 24/48 VDC distribution, up to 30 protected circuits and a 150 A total-current limit (or two 75 A groups) for this product.

These ratings apply to K 7217 only. They cannot be transferred to the site-listed F7130 or F7130A, and a larger distribution frame is not automatically a compatible retrofit for the installed panel.

Confirm breaker arrangement, input feed, terminal positions and the approved cabinet drawing.

HIMA CPU and Power Module FAQ

Is F7130 the same supply as F7130A? +

Do not assume so. HIMA documents F7130A as a 24 VDC-to-5 VDC power supply for H41q. Identify the actual F7130 assembly and its electrical function from the original label and rack documentation before comparing these part numbers.

Can F7126 replace F7130A because both output 5 VDC? +

Not by output voltage alone. The HIMA H41q/H51q catalog assigns F7126 to H51q and F7130A to H41q. Rack interfaces, connections and redundancy must match the installed system.

Is F-PWR 02 the standard HIQuad X 5 VDC power supply? +

No. HIMA identifies F-PWR 01 as the 24 VDC-to-5 VDC, 50 W supply. F-PWR 02 is the watchdog supply module for the H51X extension rack.

Can F2201 be ordered as a substitute for F8620? +

Do not use them interchangeably without a manufacturer-approved hardware and software match. Record the complete F-series assembly number, rack, operating system and application configuration of the original processor.

Can K 7217 replace a rack power supply such as F7126? +

No. K 7217 distributes and protects 24/48 VDC cabinet circuits. F7126 converts 24 VDC to 5 VDC for an H51q rack. The two products have different electrical functions and mounting arrangements.

HIMA Manufacturer References

Request a HIMA CPU or Power Module Quote

Send the complete HIMA order number, rack and system family, hardware revision, quantity, preferred condition, destination and a readable label photo. For CPU modules, include OS and redundant partner details; for power hardware, include input/output voltage, rack connection and protection-circuit requirements.

Send HIMA Part Specifications

 

PLCleader is an independent industrial spare-parts supplier, not an authorized HIMA distributor or representative. Trademarks belong to their owners. Offered unit condition, available quantity, documentation, warranty and delivery terms are confirmed for each quotation.

Browse industrial automation parts or contact our team.

Hot Tags: HIMA CPU module, HIMA power supply module, HIMA power distribution module, F2201 CPU, F8620 CPU, F7126 power supply, F7130A power supply, HIMA safety controller modules, HIMA cabinet power distribution

As one of the leading hima cpu/power distribution module manufacturers and suppliers, we warmly welcome you to wholesale discount hima cpu/power distribution module from our factory. All our products are with high quality and competitive price.

energy-efficient products, medical reagents

Disclaimer:

PLCleader sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.

PLCleader is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.