GE IC695/IC693
RX3i and Series 90-30 Parts: Match the System
IC695 parts belong to the PACSystems RX3i platform, while IC693 identifies legacy Series 90-30 hardware. CPUs, I/O modules, power supplies and communications parts serve different rack and controller configurations. A matching function or similar faceplate is not sufficient for a replacement decision.
RX3i dual-bus backplanes can support specified IC695, IC694 and Series 90-30 I/O modules; PCI-only RX3i backplanes accept IC695 modules only. For an existing installation, we recommend identifying the exact catalog number, hardware revision and rack or baseplate before requesting the spare. We can review part-number enquiries with your required quantity, preferred condition and destination country.
-
GE Fanuc IC693CPU363 Series 90-30 CPU ModulePart Number: IC693CPU363read more
Model: CPU Module
Manufacturer: GE Fanuc
Origin: USA
Describe: The GE Fanuc IC693CPU363 is a Series 90-30 Processor module. -
GE IC694ALG392-FG Analog Output ModuleManufacturer:GEread more
Part Number: IC694ALG392-FG
Origin:USA
Condition:brand new
Delivery Time: 3-5 days
HS Code:8537101190
Shipping Weight:0.3kg
Payment... -
GE IC695ALG616 Analog Input ModuleManufacturer:GEread more
Part Number:IC695ALG616
Origin:USA
Condition: brand new
Delivery Time: 3-5 days
HS Code: 8537101190
Shipping Weight:0.18kg... -
GE IC697PWR711M Power Supply ModuleManufacturer:GEread more
Part Number:IC697PWR711M
Origin:USA
Condition: brand new
Delivery Time: 3-5 days
HS Code: 8537101190
Shipping Weight:1.24kg... -
GE IC694MDL754 Positive Logic Discrete Output ModuleManufacturer:GEread more
Part Number:IC694MDL754
Origin:USA
Condition:brand new
Delivery Time: 3-5 days
HS Code:8537101190
Shipping Weight:0.25kg
Payment... -
GE IC694ALG223 Analog Input ModuleManufacturer:GEread more
Part Number:IC694ALG223
Origin: USA
Condition: brand new
Delivery Time: 3-5 days
HS Code: 8537101190
Shipping Weight: 0.36kg... -
GE IC694ALG392 Analog Output ModuleManufacturer:GEread more
Part Number:IC694ALG392
Origin: USA
Condition: brand new
Delivery Time: 3-5 days
HS Code: 8537101190
Shipping Weight: 0.3kg... -
GE IC695CRU320 CPU ModuleManufacturer:GEread more
Part Number:IC695CRU320
Origin:USA
Condition: brand new
Delivery Time: 3-5 days
HS Code: 8537101190
Shipping Weight:1kg
Payment... -
GE IC695PSA040 Multi-Purpose Power SupplyManufacturer:General Electric/GEread more
Part Number:IC695PSA040
Origin:USA
Condition: brand new
Delivery Time: 3-5 days
HS Code: 8537101190
Shipping Weight: 0.52... -
GE IC220PBI001 Ethernet Network Interface UnitManufacturer:General Electric/GEread more
Part Number:IC220PBI001
Origin:USA
Condition: brand new
Delivery Time: 3-5 days
HS Code: 8537101190
Shipping... -
GE IC695CPU315-BB Central Processing UnitManufacturer:GEread more
Part Number:IC695CPU315-BB
Origin:USA
Condition: brand new
Delivery Time: 3-5 days
HS Code: 8537101190
Shipping Weight:1.45kg... -
GE IC697BEM742 FIP Bus ControllerManufacturer: General Electric/GEread more
Part Number: IC697BEM742
Origin: Sweden
Condition: brand new
Delivery Time: 3-5 days
HS Code: 8537101190
Shipping...
Two PLC Generations, Different Hardware Paths
IC695 CPUs are associated with PACSystems RX3i, while IC693 CPUs belong to Series 90-30. These module examples show the two separate controller families; the suitable replacement depends on the installed system.

RX3i Example: IC695CPU310
The IC695CPU310 is an RX3i CPU. It uses a compatible RX3i universal backplane rather than a Series 90-30 CPU baseplate.
View IC695CPU310 details
Series 90-30 Example: IC693CPU363
IC693CPU363 belongs to the Series 90-30 CPU family. Its program, baseplate and communications arrangement are considered separately from an RX3i controller upgrade.
View IC693CPU363 detailsRX3i Backplane: Dual-Bus or PCI-Only?
A dual-bus RX3i universal backplane has PCI and serial-bus connections. The PCI-only version omits the serial connection. That physical difference changes which I/O modules can be installed.
| Hardware | Module Connection | Practical Selection Rule |
|---|---|---|
| RX3i dual-bus universal backplane | PCI for IC695; serial bus for supported IC694 and IC693 I/O | Check the exact module and slot against the RX3i supported hardware list. |
| RX3i PCI-only universal backplane | PCI connector only | IC695 modules only; IC693/IC694 serial-bus I/O cannot be installed. |
| IC695CHS007 dual-bus, slot 6 | PCI-only connector in the last slot | Use an approved single-width IC695 I/O or option module for that position. |
| Series 90-30 main CPU baseplate | Series 90-30 controller architecture | Do not fit an RX3i CPU or treat the original main baseplate as an RX3i universal backplane. |
Keep a Series 90-30 Installation or Migrate to RX3i?
Maintenance: Keep the Original Configuration
- Match the installed IC693 catalog number and hardware revision.
- Retain the required CPU program, I/O assignments and baseplate arrangement.
- Confirm the supplied module condition and included terminal parts in the quotation.
Modernization: Engineer the New Configuration
- Select the RX3i CPU and universal backplane first.
- Check whether each legacy I/O module is supported on the chosen bus and slot.
- Review program conversion, communications, firmware and commissioning tests.
The existence of a migration path does not make an IC695 CPU a direct drop-in replacement for an IC693 CPU. A planned upgrade may reuse selected I/O hardware, but only within the documented configuration.
What to Check on a Replacement Parts List
- Identify the device: exact IC695, IC694 or IC693 catalog number, suffix and revision.
- Identify the mounting system: CPU, rack or baseplate model, slot and any expansion hardware.
- Match the function: I/O direction and signal type, terminals, power and network interfaces where applicable.
- Complete the RFQ: quantity, preferred condition, destination and a readable nameplate photo.
We can prepare a part-specific offer when the requested item is identified. Availability, item condition, accessories, warranty and shipment terms are confirmed with that offer.
RX3i and Series 90-30 Technical References
Backplane connector and supported-module information is covered by Emerson's PACSystems RX3i System Manual (GFK-2314) . For other GE automation families, browse our GE components.
PLCLeader supplies industrial automation spare parts independently of the original manufacturer. For company details see About PLCLeader, or contact our sales team.
IC695 / IC693 Compatibility Questions
Some IC693 I/O and option modules are supported in RX3i dual-bus configurations. Check the particular module, CPU, slot and power requirements in the RX3i System Manual. PCI-only backplanes do not support IC693 modules.
IC694 includes RX3i serial-bus I/O and option modules. Supported IC694 modules can be installed in suitable dual-bus RX3i positions, but not in a PCI-only backplane.
No. An RX3i universal backplane is designed for RX3i CPUs. Reusing selected Series 90-30 I/O in a supported RX3i system is different from reusing a Series 90-30 CPU or main CPU baseplate.
On the seven-slot dual-bus IC695CHS007 backplane, slot 6 has a PCI connector only. It is intended for compatible single-width IC695 I/O or option modules, not IC693 or IC694 serial-bus modules.
Request IC695, IC694 or IC693 Spare Parts
Include the complete part number, revision, required quantity, destination country and installed PLC configuration. For older systems, a photo of the existing label and rack is particularly useful.
Send a Parts EnquiryAs one of the leading ge ic695/ic693 manufacturers and suppliers, we warmly welcome you to wholesale discount ge ic695/ic693 from our factory. All our products are with high quality and competitive price.
copyright services, fiber optic products, content marketing services