ABB Inverter Parts

ABB ACS800, ACS880 and Inverter Spare Parts

ABB drive spare parts include inverter and supply modules, BCU control units, RMIO control boards, fieldbus adapters and operator panels. ACS800 and ACS880 use different control architectures, so a component must be identified within its installed drive system.

Use the complete ABB drive designation and spare-part reference when requesting a replacement. Control boards, power modules and panels have separate identification and compatibility requirements.

First 1234567 Last

Drive Power Modules and Control Electronics

ABB drive hardware performs several distinct functions. Supply modules convert incoming power, inverter modules control motor output, and dedicated control electronics manage converter operation and diagnostics. The spare part must match its role in the installed drive architecture.

Supply / Inverter Modules

Power-conversion hardware used in supported single and multidrive systems.

Control Units / Boards

BCU and RMIO control electronics belonging to different drive generations.

Option Interfaces

Fieldbus, encoder, I/O and other supported drive expansion modules.

Operator Panels

Local drive operation, parameter access and diagnostic functions.

ACS800 and ACS880 do not share one universal control board or firmware platform. ABB identifies specific control and option hardware for each supported drive configuration.

ABB BCU-02, BCU-12 and BCU-22 Control Units

ACS880 Converter Control

ABB BCU-x2 control units communicate with supported converter modules through optical fiber connections. BCU-02, BCU-12 and BCU-22 differ in the number of converter-module links.

BCU-02 provides two fiber-optic connections. BCU-12 provides seven, and BCU-22 provides twelve. The additional connections in BCU-12 and BCU-22 use BPEB-05 branching boards.

The control units also provide option interfaces, a removable memory unit and external 24 Vdc power input.

View ABB BCU-02 Control Unit
ABB BCU-series control unit with grey housing, colored terminal blocks and front communication interfaces

BCU-series control-unit housing with I/O terminals and communication interfaces.

BCU Fiber-Optic Connections and Replacement Options

Installed BCU Converter Connections ABB-Listed Replacement Types
BCU-02 2 BCU-02, BCU-12 or BCU-22
BCU-12 7 BCU-12 or BCU-22
BCU-22 12 BCU-22

ABB's replacement table permits a higher-connection BCU type to replace a lower-connection type in the documented hardware family. The installed converter configuration, control program and applicable maintenance instructions still govern the replacement.

Memory-unit retention: During a supported BCU replacement, the original removable memory unit can be transferred to retain the existing parameter settings. ABB explicitly prohibits removing or installing the memory unit while the control unit is powered.

ACS800 RMIO-01C Control Boards and Software

ABB RMIO-01C green drive control PCB with terminal strips, integrated circuits and electronic components

RMIO control-board example showing PCB components and terminal connections.

ACS800 Control Hardware

RMIO boards form part of the control hardware in supported ACS800 drive and converter installations. Their application software and control arrangement differ from ACS880 BCU units.

ABB spare-part documentation for RMIO-01C identifies control-board kits and distinguishes the board hardware from application software. Some replacement kits are supplied without the required software installed.

The appropriate application program and software loading package depend on the RMIO board version and installed ACS800 configuration.

View ABB RMIO-01C Board

Hardware alone may not be sufficient: Before commissioning a replacement RMIO board, verify the control-board version, required application software and the applicable ABB software compatibility information.

RMIO-01C and BCU-02 should be identified by their actual host drive and control architecture. They are not alternate names for one interchangeable PCB.

CDP312R Control Panel for ACS800 Drives

Local Drive Operation

The ABB CDP312R provides the local user interface for supported ACS800 drive systems. It has a four-line LCD display and separate keys for monitoring, parameter handling, functions and drive selection.

In addition to reading operating values and faults, the panel provides drive control keys for starting, stopping, changing direction, resetting faults and switching between local and remote control.

The available displays and functions depend on the installed ACS800 application program.

View ABB CDP312R Control Panel
ABB CDP312R drive control panel with LCD screen and ACT, PAR, FUNC and DRIVE mode keys

CDP312R operator panel with LCD screen, mode keys and drive-control buttons.

CDP312R Operating Modes

ACT Actual signals, operating values and fault history.
PAR Parameter groups, settings and value adjustment.
FUNC Available panel functions such as parameter handling.
DRIVE Drive selection and identification in supported configurations.

A replacement panel must support the installed drive's panel connection and control program. Panel operation and control-board firmware are separate compatibility considerations.

Select ABB Drive Spares by Hardware Function

The drive nameplate identifies the installed equipment, while the internal module usually carries its own reference. The relevant details differ for power hardware, control electronics and accessories.

Component Identification Needed Compatibility Focus
Inverter or Supply Module Drive family, module type, voltage and current designation Power stage, frame size, DC bus, cooling and cabinet arrangement
BCU Control Unit BCU model, converter type and required optical connections Fiber-optic ports, control program, memory unit and option connections
RMIO Control Board RMIO reference, board revision and ACS800 drive configuration Required application software, loading package and control interfaces
Fieldbus / I/O Adapter Adapter model, protocol, drive type and slot Physical interface, drive firmware, supported functions and network settings
Operator Panel Panel model and installed drive family Panel connector, application program and supported operating functions

ABB drive spare parts should be selected from their actual equipment identity, rather than from a shared category-wide voltage or communication specification.

ABB Drive Lifecycle and Service Planning

ABB uses four lifecycle phases to define product and service support. The lifecycle of a complete drive does not automatically establish the supply status of every internal board or accessory.

Active Normal sales, manufacturing and lifecycle support.
Classic Serial production has ended; service support remains available.
Limited Restricted service options and stock-dependent spare availability.
Obsolete Regular product supply has ended; replacement planning is required.

For an ACS800 installation, retaining the existing drive and upgrading to another platform are different projects. A modernization may change the power stage, mounting, field wiring, parameters and commissioning requirements.

ABB Legacy Drives and Lifecycle Information

ABB Technical Documents

BCU-02 / BCU-12 / BCU-22 Hardware Manual

ABB hardware manual 3AUA0000113605 covers optical connections, control-unit installation, memory units and maintenance procedures.

View ABB BCU Hardware Manual
ACS800 Standard Control Program

ABB firmware manual 3AFE64527592 documents CDP312R panel modes, operating controls, parameters and standard-drive behavior.

View ABB ACS800 Firmware Manual

Other ABB industrial control products are available through ABB Automation Parts . For a specific replacement request, contact PLCLeader with the installed drive and component references.

ABB Drive Spare Parts FAQs

Can BCU-12 or BCU-22 replace a BCU-02? +

ABB lists both BCU-12 and BCU-22 as replacement options for BCU-02 within the documented BCU-x2 family. The required converter connections, software and installed configuration must still match.

Can the memory unit be moved to a replacement ABB BCU? +

Yes, for a supported BCU-x2 replacement. ABB describes transferring the original memory unit to retain parameter settings. The control unit must be powered off before the memory unit is removed or installed.

Does a replacement RMIO-01C board include application software? +

Not necessarily. ABB spare-kit information warns that application software may not be included. Confirm the software loading requirement and supported RMIO board version before installation.

What are the four CDP312R control panel modes? +

ACT displays actual signals, PAR accesses parameters, FUNC provides panel functions, and DRIVE is used for drive selection in supported ACS800 configurations.

Can an ACS880 BCU replace an ACS800 RMIO board? +

No general direct replacement is established. ACS800 RMIO and ACS880 BCU hardware belong to different control architectures. A transition requires a supported drive modernization design, not a simple board exchange.

Request ABB Drive and Inverter Spare Parts

Please send the complete ABB spare-part number, installed drive designation, required quantity, preferred condition and destination country.

For a BCU or RMIO replacement, include the control-unit or board revision, relevant software details and available nameplate photographs.

Request ABB Drive Parts Quote
 

Hot Tags: ABB inverter parts, ABB drive spare parts, ABB ACS800, ABB ACS880, ABB BCU-02, ABB BCU-12, ABB RMIO-01C, ABB CDP312R, ABB ACS800 drive parts, ABB BCU control units, ABB ACS880 converter parts

As one of the leading abb inverter parts manufacturers and suppliers, we warmly welcome you to wholesale discount abb inverter parts from our factory. All our products are with high quality and competitive price.

chains, sprockets, pipes

Disclaimer:

PLCleader sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.

PLCleader is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.