BN 3500 Monitoring System

3500 Racks, Power Supplies, Monitors and I/O Modules

The Bently Nevada 3500 Machinery Protection System monitors rotating machinery using a modular rack architecture. A configured system combines a 3500/05 rack, 3500/15 power, a rack interface, monitoring modules and associated I/O hardware.

Common replacement parts include 3500/22M TDI modules, 3500/40M Proximitor Monitors, 3500/42M Proximitor/Seismic Monitors, 3500/25 Keyphasor modules and 3500 relay hardware.

Select replacements by complete part number, rack position, hardware revision and matching rear I/O module. Older rack interface and power-supply generations require additional compatibility checks.

First 1234567 Last

3500/05 Rack Sizes and Module Positions

The 3500/05 rack carries the power supplies, rack interface and monitoring modules. The power supplies occupy dedicated positions at the far left of the rack, with the Rack Interface Module or TDI installed beside them.

Full-Size Rack 19-inch 3500/05

Provides 14 available module positions in addition to the dedicated power-supply and rack-interface positions.

Panel, EIA rack and bulkhead mounting options are available in specified configurations.

Mini-Rack 12-inch 3500/05

Provides seven available module positions in addition to the dedicated power-supply and rack-interface positions.

Panel mounting or installation using the appropriate rack adapter is supported. Bulkhead mounting is not available.

View 3500/05 Mini-Rack

Installed rack: The 3500/05-02-04-00-00-01 is a 12-inch, panel-mount Mini-Rack. Check the complete rack ordering code before selecting a replacement chassis. A mini-rack mounted on 19-inch EIA rails requires the specified adapter panel.

3500 Machinery Protection Module Functions

Select rack hardware by function and installed module reference. Each monitor uses its own channel configuration and supported input hardware.

3500 Component System Function Replacement Check
3500/05 Rack Holds the power, interface, monitoring and optional modules. Rack size, mounting format and backplane configuration.
3500/15 Power Supply Supplies power to rack modules. Power-supply generation, input voltage option and matching PIM.
3500/20 RIM / 3500/22M TDI Rack configuration interface, diagnostics and software communication. RIM or TDI generation, matching I/O and software support.
3500/40M Monitor Proximity transducer vibration and position monitoring. Monitor channel assignments, matching I/O and transducer settings.
3500/42M Monitor Configurable proximity and seismic measurements. Sensor input configuration and corresponding rear I/O.
3500/25 Keyphasor Phase-reference signal processing. Keyphasor input type and module option.
3500/32M / 3500/33 Alarm and protection relay outputs. Contact arrangement, relay logic and output I/O.
3500/50M Tachometer and speed monitoring. Speed input, channel settings and matching I/O.
3500/60 / 3500/61 Temperature monitoring. RTD or thermocouple configuration and temperature I/O option.
3500/92 Gateway Communications with configured external systems. Protocol, network interface and module configuration.

Module ratings: Electrical inputs, temperature limits, communication interfaces and channel counts are specific to each 3500 module and hardware option. Use the applicable module datasheet.

Front Monitor and Rear I/O Matching

In the standard rear-access rack arrangement, a monitoring module is installed at the front and the associated I/O module provides the field-wiring connections at the rear.

Front Module 3500/40M Proximitor Monitor

Processes configured proximity transducer signals and evaluates the selected vibration or position measurements.

↔
Associated I/O Matching 3500/40M I/O Module

Connects field transducer signals to the monitor through the specified terminal arrangement.

The same pairing principle applies to other monitor families, including supported 3500/42M, temperature and relay hardware.

Module replacement: A replacement front monitor must match the installed I/O hardware, channel assignments and sensor configuration. Front and rear part numbers should be checked together.

3500/15 Power Supply and Legacy PIM Compatibility

The 3500/15 power supply is a half-height module installed in the designated left-side rack positions. A rack can use one supply or two supplies for redundancy.

In a two-supply arrangement, the lower supply is primary and the upper supply is backup. The power-supply module must match its Power Input Module (PIM).

Universal AC

Uses the specified Universal AC power supply and corresponding Universal AC PIM.

High Voltage DC

Uses the specified High Voltage DC power supply and matching High Voltage DC PIM.

Low Voltage DC

Uses the specified Low Voltage DC power supply and matching Low Voltage DC PIM.

Newer and Legacy Power Hardware

Power Family Compatibility Limit
Universal AC The Universal AC power supply and PIM are not compatible with legacy 3500 AC supplies or the legacy High Voltage AC and Low Voltage AC PIMs.
High Voltage DC Newer High Voltage DC supplies and PIMs are not interchangeable with legacy 3500 High Voltage DC supplies and PIMs.
Low Voltage DC Newer Low Voltage DC supplies and PIMs are not interchangeable with legacy 3500 Low Voltage DC supplies and PIMs.

Do not mix generations: Check the complete power-supply and PIM part numbers before replacement. Similar module appearance does not confirm compatibility with an older power-input arrangement.

Upgrading from 3500/20 RIM to 3500/22M TDI

The 3500/22M Transient Data Interface combines rack-interface functions with dynamic data collection for compatible condition-monitoring software. Upgrading from an older 3500/20 RIM requires hardware changes.

Critical upgrade requirement: The existing RIM I/O must be removed before a new TDI is installed. Baker Hughes warns that leaving the RIM I/O in the rack while installing a TDI will damage the TDI.

OEM Upgrade Sequence

For an approved RIM-to-TDI migration, the OEM specifies the following hardware sequence.

Step 1 Remove RIM
Step 2 Remove RIM I/O
Step 3 Install TDI I/O
Step 4 Install TDI

TDI Compatibility Checks

  • Verify the original 3500/20 RIM and RIM I/O references.
  • Select the correct replacement TDI and associated TDI I/O module.
  • Check whether older M-series monitors support the new TDI.
  • Confirm Ethernet or fiber-optic communication requirements.
  • Preserve the rack configuration and required software records.
  • Follow the approved site isolation, replacement and commissioning procedure.

M-series compatibility: The OEM identifies possible incompatibilities between older M-series monitor hardware and 3500/22M TDI installations. Verify the installed monitor hardware revisions before upgrade.

Bently Nevada 3500/22M 138607-01 Transient Data Interface module product view

Bently Nevada 3500/22M 138607-01 Transient Data Interface module.

Protection functions: The TDI provides rack configuration and diagnostic data communication. Normal automatic machinery protection relies on the configured monitor and relay hardware. Any TDI fault still requires investigation under the approved maintenance procedure.

3500 Rack Replacement Checklist

Record the rack configuration before selecting front modules, rear I/O, power hardware or a replacement TDI.

  • Rack model: Identify the complete 3500/05 part number, rack size and mounting arrangement.
  • Module position: Record the installed slot and front-module reference.
  • Rear I/O: Record the corresponding I/O part number and connector type.
  • Hardware revision: Compare the installed and proposed module revisions.
  • Power: Identify the 3500/15 supply generation and matching PIM.
  • Rack interface: Confirm whether the rack uses 3500/20 RIM or 3500/22M TDI hardware.
  • Configuration: Preserve monitor channel settings, alarm setpoints and rack files.
  • Quotation: Include the complete part numbers, required quantity, destination and available label photographs.

Baker Hughes Technical Documents

Related 3500 System Parts

Frequently Asked Questions

What is the difference between 3500/05, 3500/15 and 3500/22M? +

The 3500/05 is the rack chassis, the 3500/15 supplies rack power, and the 3500/22M provides rack-interface and diagnostic data communication functions. Each uses different hardware and replacement requirements.

Can I replace a 3500/20 RIM with a 3500/22M TDI directly? +

No. The old RIM I/O must be removed and replaced with the matching TDI I/O. Leaving the RIM I/O installed while fitting a TDI can damage the TDI. Check M-series monitor compatibility and follow the OEM upgrade sequence.

Do 3500/40M and 3500/42M use the same I/O modules? +

Do not assume so. The 3500/40M and 3500/42M support different monitor configurations. Match each monitor to its specified I/O module, connected transducers and channel settings.

Is the 3500/22M TDI responsible for machinery protection logic? +

The TDI provides configuration and diagnostic communications. Normal automatic protection is performed by the configured monitoring and relay hardware. A TDI fault must still be investigated under the site's approved maintenance procedure.

Can newer 3500/15 power supplies use legacy PIMs? +

Not by default. Baker Hughes identifies compatibility restrictions between newer 3500/15 power hardware and legacy AC and DC PIMs. Check the complete supply and PIM part numbers before replacement.

Request Bently Nevada 3500 Replacement Parts

Send the complete rack or module part number, rear I/O reference, hardware revision, required quantity and destination country. Include module-label photographs when available.

Send Your 3500 Module Details

As one of the leading bn 3500 monitoring system manufacturers and suppliers, we warmly welcome you to wholesale discount bn 3500 monitoring system from our factory. All our products are with high quality and competitive price.

Bently Nevada 3500 system quote, 3500 machinery monitoring modules, 3500 replacement parts in stock

As one of the leading bn 3500 monitoring system manufacturers and suppliers, we warmly welcome you to wholesale discount bn 3500 monitoring system from our factory. All our products are with high quality and competitive price.

process monitoring, rotating equipment monitoring, lubrication system monitoring

Disclaimer:

PLCleader sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.

PLCleader is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.