Siemens

Siemens PLC and Industrial Automation Spare Parts

Siemens industrial automation equipment spans SIMATIC controllers, SIMADYN D control modules, Siemens Moore process-control hardware, industrial drives and communication components. These platforms use different hardware architectures and replacement parts.

For replacement purchases, use the complete order number and installed system family. SIMATIC, SIMADYN D, Moore and drive hardware are not interchangeable product lines.

First 1234567 Last

SIMATIC S7: PLC Controllers and Modular Hardware

SIMATIC CONTROL SYSTEMS

SIMATIC hardware covers different controller generations, including S5, S7-300, S7-400, S7-1200 and S7-1500. Each platform uses its own supported controller, I/O, communication and mounting arrangements.

S7-400 installations may use standard, high-availability or fail-safe control configurations, depending on the installed processor and system design.

A CPU, rack module or communication processor must belong to the correct SIMATIC generation. A similar Siemens order number alone does not establish cross-platform fit.

Browse SIMATIC S7 Hardware
Black Siemens SIMATIC S7-400 CPU module housing with rear connector edge and mounting structure

SIMATIC S7-400 CPU module housing and rear connection structure.

Siemens identifies S7-400 as a long-term control platform. However, the lifecycle status of individual CPUs, signal modules and accessories varies by article number.

SIMADYN D: Siemens 6DD and Related Legacy Hardware

Siemens SIMADYN D SP8 power supply enclosure with three cooling fans, upper handle and electrical connectors

SIMADYN D SP8 power supply enclosure with cooling fans and connection points.

LEGACY CONTROL HARDWARE

SIMADYN D systems use dedicated control boards, interface modules, subracks and power supplies. Their architecture differs from the SIMATIC S7 controller family.

The 6DD1683 series, for example, includes SP8 power supply references used in SIMADYN D installations.

The original subrack and module function determine the required hardware. Not every Siemens 6DP reference should be treated as interchangeable with a 6DD board.

Browse Siemens 6DD / 6DP Parts

Siemens Moore: Legacy Process-Control Equipment

APACS+ AND MOORE PRODUCTS

Siemens Moore hardware is associated with legacy process control installations, including APACS+ and related Moore system architectures.

Equipment in these systems can include control modules, signal interfaces, termination assemblies, communication hardware and interconnect cables.

Moore references such as 16139, 16167 and 16267 identify different hardware functions. They should be selected within the original Moore system rather than treated as SIMATIC S7 components.

Browse Siemens Moore Parts
Siemens Moore industrial control module with light grey front face and black ribbed electronics enclosure

Moore control module housing with front identification area and ribbed enclosure.

Other Siemens Industrial Equipment

Siemens also supplies industrial drive systems, network equipment, power products and specialist electronics. These product groups may appear in the same maintenance inventory but have different technical roles.

SINAMICS and SIMODRIVE

Drive and motion-control components, including power modules, control units and related hardware. Selection depends on the installed drive system rather than the PLC rack.

Industrial Communication

Siemens communication processors, network interfaces and related industrial networking equipment. Protocol, system and interface support vary by product reference.

Specialist and Legacy Parts

Siemens equipment may include HMI, process instrumentation, industrial power and other specialist components that do not belong to SIMATIC S7.

Compatible hardware made by another company is not automatically a Siemens-manufactured product. The actual manufacturer must be identified separately from the system with which the part is compatible.

Identify the Correct Product Family

The manufacturer name, equipment label and installed controller or drive system provide the starting point for selecting the appropriate replacement category.

Equipment Identification Likely Product Family Next Product Category
SIMATIC S5 or S7 controller, 6ES reference Siemens SIMATIC controller or related hardware SIMATIC S7 Modules
SIMADYN D, 6DD control board SIMADYN D legacy control equipment Siemens 6DD / 6DP
Moore / APACS+ controller or 16xxx module Siemens Moore legacy process-control hardware Siemens Moore Parts
SINAMICS, SIMODRIVE, 6SL or 6SE drive reference Siemens industrial drive hardware Confirm the specific drive system and model reference
CTI 2572 Ethernet adapter Control Technology Inc. compatible equipment Verify CTI manufacturer identity and SIMATIC 505 system compatibility

An order-number prefix helps identify a product family, but the complete reference and manufacturer marking are necessary for precise identification.

Maintaining Existing Systems and Planning Upgrades

A replacement module and a complete platform upgrade involve different technical decisions.

For continued operation of an existing system, the required hardware must correspond to its original controller, rack, network and application configuration.

Modernization may instead involve changes to controller hardware, programming software, communication networks, I/O wiring and commissioning procedures.

Siemens Product Lifecycle

Lifecycle status varies across Siemens product generations and individual order numbers.

Although S7-400 remains positioned by Siemens as a long-term controller platform, selected S7-400 components reached additional phase-out or product-cancellation milestones in 2026.

Refer to the relevant Siemens product record for the lifecycle status, support documents and any officially identified successor.

Siemens Product Documentation

Search by the complete Siemens article number for technical manuals, product information, software compatibility and lifecycle notices.

Siemens Industry Online Support

Related Siemens Product Categories

For a specific SIMATIC S7-400 CPU reference, see 6ES7416-5HS06-0AB0 . For SIMADYN D hardware, see 6DD1683 SP8 Power Supply . For Moore system references, see Moore 16xxx Automation Modules .

Siemens Automation Parts FAQs

Is SIMADYN D part of SIMATIC S7? +

No. SIMADYN D is a separate Siemens control architecture using specialized legacy hardware. Its modules are not SIMATIC S7 rack components.

Are Siemens Moore modules compatible with SIMATIC? +

Siemens Moore and SIMATIC are different control product families. Moore APACS+ modules cannot be treated as SIMATIC PLC replacement modules. Any integration requires the relevant system documentation.

Is every SIMATIC 505-compatible adapter made by Siemens? +

No. Some compatible products are made by other manufacturers. CTI 2572, for example, is a Control Technology Inc. Ethernet adapter for supported CTI 2500 and SIMATIC 505 installations.

Do Siemens SINAMICS drive parts fit SIMATIC PLC racks? +

SINAMICS drive components belong to drive and motion-control systems. Their mechanical and electrical interfaces are not generally interchangeable with SIMATIC PLC rack modules.

Are all SIMATIC S7-400 components still sold? +

No. Siemens continues to position S7-400 as a long-term platform, but selected components have individual phase-out and cancellation milestones. Lifecycle status must be checked by exact article number.

Request Siemens Industrial Automation Spare Parts

Looking for an existing Siemens controller, control board, drive component or Moore module? Send us the complete manufacturer part number, required quantity and destination country.

For replacements, include the installed system family, hardware revision and available nameplate photographs. We can review the requested reference and the offered supply conditions.

Request Siemens Parts Quote
 

Hot Tags: Siemens industrial automation, Siemens PLC modules, SIMATIC S7, Siemens S7-400, Siemens 6DD, Siemens 6DP, SIMADYN D, Siemens Moore, APACS+ spare parts, Siemens automation spare parts, Siemens SIMATIC S7 modules, Siemens 6DD and 6DP parts, Siemens Moore automation parts

As one of the leading siemens manufacturers and suppliers, we warmly welcome you to wholesale discount siemens from our factory. All our products are with high quality and competitive price.

Disclaimer:

PLCleader sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.

PLCleader is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.