X-FTA 002 01L 01R
Single-construction termination for listed modules, including X-DI 32 01 and X-DI 32 51. Match the full assembly and wiring requirements.
HIMA I/O equipment spans distinct hardware platforms. HIMax X-series uses modular digital and analog cards; HIMatrix includes compact and remote I/O; legacy F-series modules such as F6214 and F3331 operate in their original rack arrangements. Similar channel counts do not establish matching electrical characteristics or safety functions.
Select by the full module designation, revision, signal function, compatible terminals and installed controller configuration. Safety classification must be verified for the specific module and application—not assumed from the HIMA brand.
The HIMax X-series includes both safety-related and non-safety-related I/O variants. X-DI 32 01 and X-DI 32 51 each provide 32 digital inputs at 24 V DC, but only the former is listed for SIL 3 applications. The X-DI 32 51 manual states that its input values and status must not be used for safety functions.
| HIMax module | Signals and channels | HIMA classification / function |
|---|---|---|
| X-DI 32 01 | 32 digital inputs · 24 V DC | SIL 3 listed for this variant |
| X-DI 32 51 | 32 digital inputs · 24 V DC | Non-safety-related input module; do not use its data for safety functions |
| X-DO 24 01 | 24 digital outputs · 24 V DC / 0.5 A | SIL 3 listed; line monitoring and individual channel shut-off |
| X-AI 16 51 | 16 isolated analog inputs · current / TC / Pt100 | SIL 1 listed; verify the selected measurement configuration |
The required FTA, connector board and system cable depend on the exact X-series module. The SIL value in a product list does not replace the safety manual or the certificate for the installed revision.
HIMatrix remote I/O combines input and output channels in model-specific arrangements. The F3 AIO 8/4 01 has eight safety-related analog inputs and four analog outputs that are not inherently safety-related. Its manual permits a safety-related output application only when output values are read back through safety-related analog inputs, evaluated in the user program and linked to a defined safe reaction.
| HIMatrix unit | I/O combination | Selection focus |
|---|---|---|
| F3 DIO 16/8 01 | 16 DI + 8 DO | Digital signal assignments and output wiring |
| F3 DIO 20/8 02 | 20 DI + 8 DO | I/O count, line monitoring and device revision |
| F3 AIO 8/4 01 | 8 AI + 4 AO | Safety-related inputs; analog outputs require readback, program evaluation and safe reaction for safety use |
Older HIMA rack installations may use F-series modules. These products are selected against their legacy backplane and wiring, not as direct substitutes for HIMax X-series cards or HIMatrix remote I/O.
F6214 is identified as a four-channel analog input module. Check the legacy rack, signal range, revision and existing terminal connections before replacing it.
F3331 is an eight-channel safety-related output card in the legacy range. Verify the original rack position, output load, wiring and exact module designation.
Single-construction termination for listed modules, including X-DI 32 01 and X-DI 32 51. Match the full assembly and wiring requirements.
Redundant-construction termination for specified safety-related modules, including X-DI 32 01. X-DI 32 51 is not listed for this FTA.
Replacement boundary: verify controller OS, connector board, FTA, system cable and the approved safety project. An identical connector or higher channel count does not establish a certified substitution.
The HIMA module overview does not list X-DI 32 51 for this redundant-construction FTA. It lists the module for compatible single-construction FTAs instead. Check the exact wiring and certified system design.
The four outputs are not inherently safety-related. HIMA requires output readback via safety-related analog inputs, user-program evaluation, defined fault reactions and the specified safe shutdown configuration before safety-related use.
Not as a direct card swap. Legacy F-series and HIMax use different platform hardware. A migration requires verified rack and terminal changes, controller configuration and safety-function validation.
Send the full module designation, hardware revision, HIMax/HIMatrix or legacy platform, required quantity, condition and destination . For installed replacements, include the controller release, rack/slot, FTA or terminal number, signal ratings and a clear module-label photo.
Submit HIMA I/O RFQAs one of the leading hima i/o modules manufacturers and suppliers, we warmly welcome you to wholesale discount hima i/o modules from our factory. All our products are with high quality and competitive price.
Disclaimer:
PLCleader sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.
PLCleader is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.