ABB Bailey INFI 90

ABB Bailey INFI 90 and Symphony Harmony Spare Parts

ABB Bailey Network 90, INFI 90, INFI 90 Open and Symphony Harmony systems use distinct generations of process controllers, digital and analog I/O, network interfaces and field termination hardware. We source components by the complete catalog number, including bridge controllers such as BRC-100 and legacy digital input cards such as NDSI02.

Check the installed controller generation, module designation and revision before selecting a spare. Harmony modernization options do not establish automatic interchangeability for every legacy board. For an exact-part inquiry, send the existing module number and a readable label photograph.

First 1234567 Last

Bailey Control Generations and Installed Hardware

Network 90 Early Bailey DCS architecture
INFI 90 Control and communication evolution
INFI 90 Open Expanded installed-base architecture
Symphony Harmony Harmony Rack control and I/O

ABB's Symphony family supports phased system upgrades. Existing cabinets can contain components from more than one generation, so a replacement is identified by its controller, I/O or termination role and the specific installed arrangement—not the generation name alone.

Bridge Controllers, I/O and Communication Modules

BRC-100 (P-HC-BRC-10000000) is a Harmony Rack bridge controller. Its replacement involves processor and control-configuration details, rather than the field-input parameters used to select an I/O card.

Hardware group Selection priority
Bridge controllers Controller code, firmware, redundancy and rack arrangement
Digital / analog I/O Channel type, signal range, termination and field wiring
Network interfaces Communication module, paired interface and network generation
Termination hardware Mounting unit, terminal assembly, mating cable and connector

BRC-100 controller part details

ABB BRC-100 Harmony Rack bridge controller circuit board with front mounting plate

ABB BRC-100 Harmony Rack bridge controller assembly.

NDSI02 Digital Input and Harmony Rack Migration

NDSI02 is a 16-channel Bailey digital input module. ABB's published Harmony Rack evolution mapping identifies SPDSI22 as a migration option; the mapped signal ranges include 24 V DC, 125 V DC and 120 V AC. The correct implementation depends on the actual termination and field-circuit arrangement.

NDSI02 Legacy 16-channel digital input
→
SPDSI22 ABB-listed Harmony Rack migration option

Field wiring must be reviewed. Check FC84 termination, input common arrangements and field voltage against ABB's migration guidance. This mapping is not approval for an unconditional board exchange.

For signal range, channel allocation and termination details, see the NDSI02 digital input product information .

Three Checks Before a Bailey Module Replacement

01 / IDENTITY

Module and revision

Read the full ABB Bailey catalog number, suffix and installed hardware revision. Include a clear module label photo.

02 / SYSTEM FIT

Cabinet and interfaces

Identify rack position, paired controller or network module, field termination and signal wiring as applicable.

03 / CHANGE SCOPE

Like-for-like or migration

For an alternative part, verify ABB's documented mapping and the site-specific configuration before recommissioning.

ABB Bailey and Harmony Spare Parts FAQs

Can BRC-100 replace any Network 90 controller? +

No. ABB's system evolution supports defined upgrade paths, but the installed controller code, rack interfaces, firmware and control strategy must be matched before a BRC replacement is approved.

How do I distinguish an I/O fault from a termination fault? +

Use the installed system's diagnostics, wiring drawings and approved test procedure to identify the affected channel, module and termination circuit. Matching the card number alone does not establish which component has failed.

Is an INFI-NET communication card interchangeable with a digital input module? +

No. Network-interface hardware handles system communications, while digital input modules acquire field signals. The functions, rack connections and configuration requirements are different.

Request an ABB Bailey / Harmony Exact-Part Quote

Send the complete catalog number, revision, quantity, item condition and destination country . For an existing system, include the cabinet or rack identification and a readable nameplate photo. If a different module is proposed, include both numbers so we can check the specified supply request.

Submit Bailey Spare Parts RFQ
 
Hot Tags: ABB Bailey INFI 90, ABB Network 90, ABB INFI 90 Open, ABB Symphony Harmony, Bailey BRC-100 controller, ABB NDSI02 digital input module, Harmony Rack I/O, Bailey termination units, ABB Bailey controller modules, ABB INFI 90 spare parts, ABB Symphony Harmony modules

As one of the leading abb bailey infi 90 manufacturers and suppliers, we warmly welcome you to wholesale discount abb bailey infi 90 from our factory. All our products are with high quality and competitive price.

surface mount technology, wireless access points, pipes

Disclaimer:

PLCleader sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.

PLCleader is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.