
CP30B Control Processor
Identify the original CP30B board and revision, processor station and Nodebus/control-network arrangement. A shared Foxboro I/A Series name does not mean every FBM, station or newer baseplate accepts this processor.
Foxboro processor hardware ranges from legacy CP30B and CP60 stations to the ZCP270, FCP270/FCP280 and FDC280. Their control-network, baseplate and field-device connections differ. ZCP270 operates through specified Fieldbus Communications Modules; FCP280 controls connected FBMs; FDC280 integrates supported Ethernet and serial devices directly.
For an installed I/A Series controller, the CP model and station hardware are part of the replacement identity. The original mounting, control-network interface and software release must be established before choosing a processor from another generation.

Identify the original CP30B board and revision, processor station and Nodebus/control-network arrangement. A shared Foxboro I/A Series name does not mean every FBM, station or newer baseplate accepts this processor.

The P0961FR assembly number distinguishes the requested CP60 hardware. Match the installed station, its control-network/fieldbus communications and the system release before considering a ZCP or FCP migration.
The Z-Module Control Processor 270 connects to the MESH control network and compatible Fieldbus Communications Modules using redundant 100 Mbps fiber-optic Ethernet. The FCM model determines the downstream FBM fieldbus type.
FCM100E interfaces either a 268 Kbps fieldbus for 100 Series FBMs or a 2 Mbps fieldbus for 200 Series FBMs, according to the documented configuration.
FCM100Et interfaces the 2 Mbps Module Fieldbus used by 200 Series FBMs. It is not identified as the 268 Kbps interface for 100 Series FBMs.
FCP280 performs process control through connected FBMs and four baseplate fieldbus ports. It requires Foxboro DCS Control Core Services v9.0 or later.
100 Series and 200 Series FBMs may be included in pre-approved mixed configurations. Check each fieldbus port, loading, network adapter, software and redundancy arrangement.
FDC280 combines process control with direct communication to supported field devices. Drivers and the connected device protocol determine the integration; no additional Foxboro FBM is required for that supported direct connection.
The April 2025 OEM specification requires a host workstation with Control Core Services v9.3 or later. FDC280 is not an FCP280 plug-in replacement.
Where required, FDC280 driver families include specified Modbus TCP/RTU, OPC UA Client, EtherNet/IP Scanner and other supported protocols. Confirm the exact licensed driver and version rather than assuming all protocols are installed.
| Processor | Installed-system evidence | Main compatibility question |
|---|---|---|
| CP30B | CP board, station, Nodebus/control network and revision | Does the offered CP30B match the existing legacy station and software? |
| CP60 P0961FR | Complete P0961FR assembly, control-network interface and system release | Is the original processor or an engineered migration required? |
| ZCP270 | FCM100E or FCM100Et, FBM series, fieldbus speed and MESH network | Which FCM and fieldbus configuration supports the installed I/O? |
| FCP280 | FCP280 baseplate, four HDLC ports, FBM mix, CCS release and redundant pair | Is the proposed port and FBM layout manufacturer-approved? |
| FDC280 | FDC baseplate, Ethernet/serial device, driver and CCS release | Is the required protocol/driver supported by the actual system? |
For separate I/O hardware, see Foxboro FBM modules; for field wiring components, see termination assemblies. A baseplate, power module or field termination does not become a control processor because it appears in the same station.
The ZCP270 specification identifies FCM100Et for the 2 Mbps 200 Series fieldbus. FCM100E is the listed option for the 268 Kbps 100 Series fieldbus, and it can also interface 2 Mbps 200 Series FBMs. Check the installed FCM and bus type.
Yes, subject to the manufacturer's controller sizing and supported topology. The two FCM types do not have identical downstream fieldbus functions, so each connected FBM group must be matched to its FCM.
Yes, in a pre-approved configuration. The April 2025 FCP280 specification allows specified mixed 100/200 Series arrangements. Verify port configuration, fieldbus loading, interface hardware and Control Core Services release before making changes.
No. FDC280 is designed to integrate supported Ethernet and serial field devices directly, using the applicable driver and interface. It still requires the correct baseplate, control network, software and device-specific configuration.
No universal plug-in replacement is established. A CP60-to-FCP migration must address the installed control network, station/baseplate, fieldbus modules and software. Use a documented migration plan for the particular plant.
Send the complete CP, ZCP, FCP or FDC part number, hardware revision, system/software release, installed baseplate or station, quantity, preferred condition, destination country and a readable label photo. For ZCP270 include the FCM and FBM series; for FCP/FDC include the fieldbus or connected device protocol.
Send Foxboro Processor Details
PLCleader is an independent industrial spare-parts supplier, not an authorized Schneider Electric or Foxboro distributor or representative. Trademarks belong to their respective owners. Offered condition, origin, quantity, inspection records, warranty and delivery terms are confirmed for each quotation.
Browse Foxboro spare parts or contact our team.
As one of the leading foxboro cpu | cp/zcp/fcp manufacturers and suppliers, we warmly welcome you to wholesale discount foxboro cpu | cp/zcp/fcp from our factory. All our products are with high quality and competitive price.
pipe supports, programmable logic controllerDisclaimer:
PLCleader sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.
PLCleader is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.