Source GE-branded turbine control boards, protection-relay components and legacy PLC spares by the installed platform and complete catalog number. The five ranges below use different hardware architectures; a similar part prefix does not establish interchangeability.
GE Fanuc IC754CSL06CTD is a legacy 6-inch QuickPanel Control operator interface with a color TFT resistive touchscreen, 320 × 240 resolution, 24 VDC input, Ethernet and serial communications....
The GE IS215WETAH1C serves as the main control board within the WETA (Wind Electronic Top Assembly) nacelle top box for Mark VIe wind turbine control systems. It handles field signal acquisition...
The GE DS3820PSCB1C1B is a dedicated power supply module engineered for the Speedtronic Mark IV control system, ensuring stable, high-reliability voltage distribution for critical turbine...
Identify the Hardware Role Before Replacing a GE Part
Control boards, I/O packs, protection relay modules and PLC CPUs have different connections and software dependencies. A complete part number is essential, but the installed platform and mating hardware determine whether the component is suitable.
Mark VI / Mark VIe Control Hardware
A Mark VIe I/O assembly combines a terminal board, field terminal block and I/O pack; the controller runs the control application. A board with an IS200 prefix may belong to a particular control or power subsystem, so its function must be established from the exact catalog number.
Complete board number, paired terminal board and system generation
Signals, mating interfaces and firmware can differ
Multilin Relay Module
Relay model, slot, module code and hardware generation
Protection functions and communication options vary
IC695 / IC693 PLC
Controller series, rack/backplane, firmware and I/O type
Different CPU and I/O platforms have different requirements
VersaMax IC200
CPU or I/O catalog code, carrier and communication arrangement
Modules depend on the installed VersaMax assembly
DS200 Legacy Board
Full DS200 number, original equipment and board revision
A shared DS200 prefix does not mean one interchangeable system
Multilin Relay Modules: Match the Relay, Not Just the Card
UR9HH CPU module from the Multilin UR product family.
GE Multilin protection relays use model-specific processing, measurement, input/output and communication modules. A UR-series CPU card is not a complete protective relay, and its compatibility depends on the relay hardware generation and installed options.
The UR9HH CPU module is one example of a replaceable module. For an existing relay, retain the full relay order code and the part number printed on the removable unit.
Protection settings and relay testing must follow the plant's approved procedures after hardware changes.
Legacy PLC and DS200 Parts Need Their Own References
IC695 / IC693
GE Fanuc Series 90-30 and PACSystems RX3i items should be selected against the installed CPU, rack, backplane and module revision. Current PACSystems product support is associated with Emerson; older GE-branded parts remain identifiable by their original catalog codes.
VersaMax / IC200
Check the complete IC200 module or CPU identifier and its carrier, power and communication arrangement. Do not substitute an IC695 or IC693 part simply because both are legacy GE automation hardware.
GE DCS200 / DS200
The site's DCS200 category contains DS200-prefixed legacy drive and control boards. Identify the equipment and board function from the exact DS200 number; the category name alone does not establish compatibility.
Mixed or Unclear Markings
For Mark IV, VME and other older GE assemblies, send the original label and equipment model. We can use that information to locate the correct catalog family instead of assigning the item to an unrelated product system.
Information for an Exact GE Spare-Parts Quote
Different GE families require different compatibility checks. For the fastest part identification, include the information available on your original hardware and maintenance record.
Part NumberFull catalog code, suffix and board revision
Installed SystemMark platform, relay model or PLC family
Matched AssemblySlot, carrier, terminal board or related module
Purchase DetailsQuantity, destination and required delivery date
We confirm offered condition, availability, included items and shipping terms for the specific part in our quotation. A photograph of the original label is particularly useful for discontinued or revised hardware.
Hardware interchangeability and any changes to turbine controls, protection-relay settings or PLC programs must be approved under the site's engineering and maintenance procedures.
GE Spare Parts FAQ
Can an IS200 board replace any Mark VIe I/O pack? +
No. IS200 identifiers cover different board functions. An I/O pack, terminal board and power card have distinct roles; match the complete part number and installed control system.
Is a Multilin UR CPU module a complete protection relay? +
No. It is one module within a compatible UR relay platform. Relay generation, module slot and communication options must be identified before replacement.
Are IC695, IC693 and IC200 modules interchangeable? +
Not by catalog prefix alone. These families use different controller, rack or carrier arrangements. Confirm the installed series and exact replacement requirements.
Does the DCS200 category mean all DS200 boards fit the same equipment? +
No. DS200 is used across different legacy board functions and equipment. Supply the entire order code and original equipment reference.
What if the part label is incomplete or unreadable? +
Send photos of both sides of the unit, any remaining markings, the installed rack or carrier and the equipment model. These details can help narrow the appropriate replacement.
Request a GE Automation Spare Parts Quote
Send the complete GE part number, installed platform, hardware revision, quantity and destination country. Add original label photos and the required delivery date when available.
As one of the leading ge manufacturers and suppliers, we warmly welcome you to wholesale discount ge from our factory. All our products are with high quality and competitive price.
PLCleader sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.
PLCleader is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.