Bently Nevada
Bently Nevada Monitoring Systems and Sensors
Bently Nevada machinery-monitoring products support vibration, shaft position, speed and other condition measurements on rotating equipment. The product range includes machinery protection racks, proximity transducers, seismic sensors and transmitters.
PLC Leader is an independent industrial spare-parts supplier offering selected Bently Nevada hardware. Find replacement parts by monitoring system, sensor type or complete manufacturer part number.
The correct replacement depends on the installed equipment. A 3500 rack module, a proximity probe and a vibration transmitter serve different functions and require different compatibility checks.
-
Bently Nevada 3500/22M 138607-01 Transient Data Interface...Part No.: 3500/22M 138607-01read more
Manufacturer: Bently Nevada
Product Type: Transient Data Interface Module
Series: 3500
BUYER INFORMATION... -
Bently Nevada 21504-036-068-10-02 7200 Series 8 mm Proxim...Bently Nevada 330101-00-81-10-02-05 3300 XL 8 mm Proximit...Bently Nevada 31000-26-05-20-041-01-024 Proximity Probe H...Bently Nevada 31000-28-10-00-190-02-02 Proximity Probe Ho...Bently Nevada 31000-28-10-00-185-01-02 Proximity Probe Ho...Bently Nevada 31000-28-10-00-190-01-02 Proximity Probe Ho...Bently Nevada 31000-28-10-00-185-02-02 Proximity Probe Ho...Bently Nevada 330903-00-05-10-02-00 3300 XL NSv Proximity...Bently Nevada 21000-28-05-00-050-04-02 Proximity Probe Ho...Bently Nevada 21000-28-05-20-020-03-02 Proximity Probe Ho...
Explore Bently Nevada Product Families
Choose the product family that matches the installed monitoring system or measurement point. Rack hardware, non-contacting probes and seismic sensors require different spare parts.
MACHINERY PROTECTION3500 System Parts
Rack-based machinery monitoring hardware, including 3500/05 racks, power supplies, TDI modules, monitors, relays and matching I/O.
Explore 3500 Parts
SHAFT VIBRATION AND POSITIONProximity Transducers
Non-contacting shaft displacement measurement using supported probe, extension cable and Proximitor Sensor configurations.
Explore Proximity Parts
CASING AND STRUCTURAL VIBRATIONSeismic Vibration Sensors
Velocity sensors and accelerometers used to measure vibration at bearing housings, equipment casings and machine structures.
Explore Related Sensor PartsRepresentative products: 3500/22M TDI module, 3300 XL 8 mm probe and 330500 Velomitor sensor.
Vibration TransmittersSelected 177230 Seismic Transmitters and 990-series vibration transmitters provide model-specific 4–20 mA outputs for compatible monitoring or control systems. Their sensor inputs and measured quantities differ.
Browse Transmitter PartsCables and AccessoriesExtension cables, interconnect cables, connectors and related accessories for compatible Bently Nevada monitoring equipment.
Browse Cables and AccessoriesFind Parts by Measurement Task
The measurement required helps identify the right product family. Confirm the connected monitoring equipment before selecting a replacement sensor or module.
Measurement or Need Relevant Product Family What to Check Shaft-Relative Vibration Proximity Transducer System Probe diameter, installed system length and compatible signal conditioning. Axial Shaft Position Proximity Probe and Position Monitoring Required displacement range, mounting dimensions and monitor function. Bearing Housing Vibration Velomitor or Seismic Sensor Velocity or acceleration output, sensitivity, mounting and monitor input. Vibration Signal to PLC or DCS Vibration Transmitter Measured variable, sensor input, 4–20 mA scaling and loop-power requirements. Machinery Protection Rack Repair 3500 Machinery Protection System Rack model, front module, rear I/O and hardware revision. Speed or Phase Reference Speed or Keyphasor Monitoring Components Tachometer or phase-reference function, target type and configured input channel. Measurement selection: A shaft-relative proximity measurement is different from casing vibration. A transmitter may also require a separate sensor or matched transducer system, depending on its model.
Velocity Sensors and Vibration Transmitters
A Velomitor sensor and a vibration transmitter may both be used in condition-monitoring applications, but their electrical outputs and connections are not necessarily the same.
Velomitor Piezo-Velocity SensorThe 330500 Velomitor provides a vibration-related electrical signal from its internal sensing electronics. It must connect to a compatible monitoring input with the required excitation and signal conditioning.
177230 Seismic TransmitterThe 177230 is a loop-powered vibration transmitter that provides a 4–20 mA output for compatible PLC, DCS or condition-monitoring inputs. Its ordering options determine the measurement range and approvals.
For a specific transmitter example, see the Bently Nevada 177230-01-01-05 Seismic Transmitter .
Legacy Bently Nevada Replacement Parts
Older monitoring systems may use discontinued 3300 rack modules, previous-generation probes or components with superseded ordering codes. A newer family should not be assumed to fit the same rack or field connection.
Certain older 3300 5 mm and 8 mm transducer components have documented compatibility with specified 3300 XL combinations. This does not establish direct interchangeability between legacy 3300 monitoring racks and 3500 rack hardware.
For legacy requests, provide the complete manufacturer part number, installed system reference, hardware revision and clear label photos.
Bently Nevada Product Categories and Resources
3500 Machinery Protection Parts Racks, power supplies, TDI, monitors, relays and associated I/O. 3300 XL Proximity Components Probes, extension cables, Proximitor Sensors and system matching. Seismic and Transmitter Parts Selected vibration transmitters, velocity sensors and related products. Cables and Accessories Extension cables, interconnect cables and supporting components. 3500 Manufacturer Information Baker Hughes documentation and machinery protection product information. Bently Nevada Sensor Families Official proximity, velocity, acceleration and transmitter categories.Frequently Asked Questions
Which Bently Nevada parts measure shaft vibration versus casing vibration?Proximity transducers measure shaft displacement relative to the probe mounting location. Velomitor sensors and accelerometers are used for vibration measurements at bearing housings or machine casings. The monitor input must suit the sensor.
Should I choose a 3500 monitor, proximity probe or vibration transmitter?A 3500 monitor is part of a rack-based monitoring or protection system. A proximity probe senses displacement relative to a target. A vibration transmitter provides a conditioned output, often 4–20 mA, to a compatible control or monitoring input.
Can legacy 3300 rack modules fit a 3500 rack directly?No direct interchangeability should be assumed. Legacy 3300 and 3500 monitoring racks use different hardware architectures. A migration requires confirmation of the applicable OEM requirements.
What is the difference between a Velomitor and a vibration transmitter?A Velomitor is a piezo-velocity sensor used with compatible vibration-monitoring inputs. Transmitters such as the 177230 provide a standardized 4–20 mA loop output. Check the exact signal and power requirements.
What details help identify discontinued Bently Nevada spare parts?Provide the complete part number, installed monitoring-system family, hardware revision and product-label photos. For sensors and modules, include the connected cable, signal conditioner or associated I/O part number where relevant.
Request Bently Nevada Replacement Parts
Send the complete manufacturer part number, installed system, required quantity and destination country. Include revision or related-component details when applicable. Available condition and delivery terms are provided in the quotation.
Send Your Bently Nevada Part NumberAs one of the leading bently nevada manufacturers and suppliers, we warmly welcome you to wholesale discount bently nevada from our factory. All our products are with high quality and competitive price.
Bently Nevada parts quotation, Bently Nevada module availability, Bently Nevada replacement stock
As one of the leading bently nevada manufacturers and suppliers, we warmly welcome you to wholesale discount bently nevada from our factory. All our products are with high quality and competitive price.
quality control monitoring, shaft alignment tool, asset lifecycle managementDisclaimer:
PLCleader sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.
PLCleader is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
