AB 1757

1757 ProcessLogix Controllers, Fieldbus and Redundancy Parts

Allen-Bradley 1757 parts serve different roles in ProcessLogix and related control systems. The 1757-PLX52 handles process control, the 1757-FIM interfaces with FOUNDATION Fieldbus H1 networks through an RTP, and the 1757-SRM supports specified redundant-controller arrangements. The 1757-BEM and 1757-SRC cables are associated accessories, not substitutes for the controller or interface.

For an installed system, the part number and series must match the controller release, chassis configuration and relevant connection hardware. We can quote identified 1757 modules and accessories against the required quantity and destination.

PLX52 Processor FIM / FIMRTP SRM / SRC Fiber Cable

Process Controller and Redundancy Module: Different Functions

Allen-Bradley 1757-PLX52 ProcessLogix controller module showing the module housing and connector

1757-PLX52 Process Controller

The PLX52 is a controller component. An exact replacement requires the installed ProcessLogix release and hardware revision to be considered together with the control configuration.

1757-PLX52 product details
Allen-Bradley 1757-SRM redundancy module showing connector-side housing and identification label

1757-SRM Redundancy Module

The SRM supports specified redundant chassis systems and uses an associated fiber-optic redundancy cable. Matching the module alone does not establish a working redundant pair.

1757-SRM product details

How the 1757-FIM Connects to FOUNDATION Fieldbus H1

The 1757-FIM is a fieldbus interface module. A companion 1757-FIMRTP remote termination panel connects the FIM to as many as two separate H1 fieldbus links. Each link has its own scheduling and link-management functions.

1757-FIM Fieldbus Interface Module
↓
1757-FIMRTP Remote Termination Panel
↓
  • The FIM and FIMRTP are separate hardware items.
  • Each H1 segment needs the appropriate termination, power and device configuration.
  • The 1757-FFLD2 linking device is a different product; it is not a 1757-FIM replacement.

Rockwell Fieldbus Solutions User Manual (1757-UM006)

1757-SRM Cable Lengths and Pairing

Two 1757-SRM modules in a supported redundancy arrangement communicate through a specified 1757-SRC fiber-optic cable. Select the cable using its catalog number and physical route, not the generic term “redundancy cable.”

Part Function / Length Selection Consideration
1757-SRM Redundancy module Confirm module series, controller platform and paired chassis configuration.
1757-SRC1 Fiber-optic cable · 1 m Check routing clearance and connection to the SRM pair.
1757-SRC3 Fiber-optic cable · 3 m Use when the documented cable run requires the longer length.
1757-BEM Battery extension module Identify the associated controller and the condition of the battery assembly.
Before returning a redundant control system to service, the applicable chassis qualification, synchronization and fault-check procedures must be completed.

Rockwell 1757-SRM Series B Installation Instructions

Related ProcessLogix Parts

1757 ProcessLogix FAQs

Is the 1757-FIMRTP the same part as a 1757-FIM? +

No. The FIM is the fieldbus interface module; the FIMRTP is its companion remote termination panel for connection to the H1 segments. A replacement must match the hardware that is installed.

Can one 1757-FIM serve two H1 segments? +

Yes. Rockwell describes the 1757-FIM as supporting up to two independent FOUNDATION Fieldbus H1 links through its associated RTP. Confirm the installed link configuration and fieldbus devices.

What is the difference between 1757-SRC1 and 1757-SRC3? +

Both are redundancy module fiber-optic cables. SRC1 is 1 meter long and SRC3 is 3 meters long. Select the documented cable length needed between the SRM modules.

Is a 1757-FFLD2 a replacement for a 1757-FIM? +

No direct replacement should be assumed. The 1757-FFLD2 is a FOUNDATION Fieldbus linking device, whereas the FIM is a ProcessLogix fieldbus interface module used with an RTP. Their connections and system architecture differ.

Request the Correct 1757 Module or Accessory

Send us the complete catalog number, series or revision, installed system release, required quantity and destination country. For FIM and SRM enquiries, include the RTP, H1 link or fiber-cable reference relevant to the replacement.

Send Your 1757 Parts RFQ
 

As one of the leading ab 1757 manufacturers and suppliers, we warmly welcome you to wholesale discount ab 1757 from our factory. All our products are with high quality and competitive price.

air compressors, pneumatic actuators, current sensors

Disclaimer:

PLCleader sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.

PLCleader is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.