Bently Nevada 3500/60 163179-01 Temperature Monitor

Bently Nevada 3500/60 163179-01 Temperature Monitor

The 3500/60 & 61 modules provide six channels oftemperature monitoring and accept both ResistanceTemperature Detector (RTD) and Thermocouple (TC)temperature inputs. The modules condition these inputs andcompare them against user-programmable alarm setpoints. The 3500/60 and 3500/61 provide identical functionalityexcept that the 3500/61 provides recorder outputs for each ofits six channels while the 3500/60 does not.

Email: sales7@apterpower.com

 Call or Whatsapp: +8618030175807

Part Number: 3500/60 163179-01

Manufacturer: Bently Nevada

Series: 3500

Operating Temperature: -30 to +65 degrees Celsius

Storage Temperature: -40 to +85 degrees Celsius

Humidity: 95%, non-condensing

Product type: Temperature Monitor

Availability: In Stock

The user programs the modules to perform either RTD or TCtemperature measurements using the 3500 RackConfiguration Software. Different I/O modules are available inRTD/TC non-isolated or TC isolated versions. The user canconfigure the RTD/TC non-isolated version to accept either TCor RTD, or a mixture of TC and RTD inputs. The TC isolatedversion provides 250 Vdc of channel-to-channel isolation toprotect against external interference

3500/60 is a Temperature Monitor designed and developed by Bently Nevada. The temperature monitoring modules have six channels and accept both Resistance Temperature Detector (RTD) and Thermocouple (TC) temperature inputs. These inputs are conditionally compared to user-programmable alarm setpoints by the modules. The process of utilizing the 3500 Rack Configuration Software to program various modules for RTD (Resistance Temperature Detector) or TC (Thermocouple) temperature measurements involves a range of options to suit specific needs. These modules come in different variants, including RTD/TC non-isolated and TC isolated versions, each catering to distinct requirements. The 3500 Rack Configuration Software empowers users to fine-tune the behavior of these modules according to their measurement objectives. The choice between RTD and TC measurements permits users to select the most appropriate method for their particular applications.

• Using the 3500 Rack Configuration Software, the user configures the modules to perform RTD or TC temperature measurements. RTD/TC non-isolated and TC isolated versions of various I/O modules are available. The RTD/TC non-isolated version can be configured to accept either TC or RTD inputs, or a combination of TC and RTD inputs.
• To protect against external interference, the TC isolated version provides 250 Vdc of channel-to-channel isolation.
• Temperature monitors must be installed in groups of three when used in a Triple Modular Redundant (TMR) configuration. The system uses two types of voting in this configuration to ensure accurate operation and to avoid single-point failures.
• If the 3500 system is operated in an ambient temperature above +35C and any of the isolated thermocouple I/O modules (-03 or -04 I/O ordering options) are used with Type E thermocouples, the available full-scale range is reduced. The reduced temperature range will be -60 to +1000 degrees Celsius. Rack configuration software allows the user to configure a channel down to -100 degrees Celsius, but the system will not function properly in this scenario and should not be configured to do so.

Related words：3500 60 163179 01;3500 60;163179 01;Bently Nevada 3500/60 163179-01;3500/60 pdf;3500/60 163179-01 manual

Is Bently Nevada 3500/60 163179-01 not the part you are wanting?

Check out the rest of our website to see what else we have to offer!

Contact Vicky(sales7@apterpower.com)