About the DS3800DMPK1E1D
The DS3800DMPK1E1D is a General Regulator board under mark IV series. There are 14 EPROM modules on the board. There are also 17 jumpers, two 34-pin ribbon cables, and two one-pin connections on the board. The DS3800DMPK1E1D replacement does not have EPROM modules inserted in the module sockets. The connectors are built into the board, and the modules can be fitted and withdrawn as needed.
Technical Specifications
Model Number: DS3800DMPK1E1D
Manufacturer: General Electric (GE)
Product Type: Generator Regulator Board
Series: Mark IV Speedtronic
PCB Type: Double-sided with multiple layers
Control Function: Voltage regulation and excitation control
Communication: Compatible with GE Mark IV control architecture
Power Supply: Operates within GE's standard rack systems
Mounting Style: Plug-in, card-rack compatible
Connectors: Edge connectors and ribbon cable interfaces
Operating Temperature: 0°C to 60°C (32°F to 140°F)
Storage Temperature: -40°C to 85°C
Compliance: OEM specifications by GE for legacy systems
Hardware Tips and Specifications
The replacement GE General Regulator Board DS3800DMPK1E1D comes without EPROM modules installed in the module sockets. The sockets are embedded on the board and the modules are designed to be installed or removed as necessary. To remove a module, slid a flat-blade screwdriver between the module and the socket on either end of the module. Rock the blade gently to lift the module free of the socket. Then, perform the same procedure on the other end of the module. Immediately place the module in a static-protective bag. The data on the module can be corrupted easily by static and the bag will prevent static from entering the module.
Locate the same socket on the replacement board and align it with the socket. Use your fingers to gently press it into the socket. Inspect the connection between the socket and the module for any space between them. Press the socket if necessary to make sure there a full connection with the module. Place the replacement board on a flattened static-protective bag while you install the modules. You must also examine the jumpers on the defective board and note the position of each jumper. That is, note if the jumper covers pins 1 and 2 or pins 2 and 3. Locate the same jumper on the replacement board and move the jumper on it to match the position.
related keywords: ds3800dmpk1e1d;GE DS3800DMPK1E1D;DS3800DMPK1E1D pdf;DS3800DMPK1E1D datasheet;DS3800DMPK1E1D manual;DS3800DMPK1E1D sell
Company Details
Aiming to be the unsung hero of the industrial age, PLC Leader focuses on efficiency, timeliness, and exceptional service to provide cutting-edge automation component solutions to manufacturers worldwide. We maintain a substantial stock of over 50 million rigorously tested and certified DCS card PLC modules, all supported by a 12-month warranty.
Welcome to continue to follow us to obtain more automatic parts and the latest part inventory information：
- DCS: ABB, Foxboro, Triconex, Ovation, Woodword, Hima, Yokogawa, Honeywell, Emerson, Kuka...
- PLC: Allen-Bradley, Schneider Modicon, GE Fnauc, Siemens, Fuji, Hollysys, Prosoft, Bachmann, Woodhead, Mitsubishi, Yaskawa, Panasonic, Omron...
- TSI: Bentley Nevada, EPRO, ENTEK ...
Is GE DS3800DMPK1E1D not the part you are wanting?
Check out the rest of our website to see what else we have to offer!
Let us know how to assist you
--Vicky
☏ 008618030175807(Whatsapp)
