+8618030175807
sales7@apterpower.com
enLanguage

Foxboro FBM Modules

Foxboro DCS I/O Selection

Select Foxboro FBM Modules by Signal Type, Channel Count and System Generation

Confirm the complete FBM model and hardware part number. Standard and Compact 200 Series modules can differ in form factor, baseplate, redundancy, signal range, channel isolation, TA and cable requirements.

System Generation
Standard or Compact 200 Series
I/O Function
Input, output or communication
Signal and Range
Analog, discrete, HART or bus
Channel Design
Count, isolation and redundancy
Baseplate Match
Slot, power and fieldbus
TA and Cable
Termination and field wiring

For a Faster RFQ

Send the full FBM label, installed controller and baseplate, software release, TA and cable numbers, signal type, quantity, required condition, destination and delivery target.

Variant letters matter: FBM201, FBM201b, FBM201c, FBM201d and FBM201e are not automatically identical. Range, accuracy, isolation, redundancy and system support must be checked against the exact Product Specification Sheet.

到

First 12 Last

Buyer’s Technical Guide

Foxboro Standard and Compact 200 Series FBM Selection Guide

Foxboro Fieldbus Modules connect plant signals and communication networks to the control system through a compatible baseplate, fieldbus, Termination Assembly and cable. Select the function first, then verify the exact hardware part number, subsystem generation, channel design, redundancy and system release.

Start with the FBM Function

ANALOG

Current and voltage input/output

Families such as FBM201 cover model-specific analog ranges. Other FBMs provide isolated inputs, analog outputs, readback or mixed I/O.

DISCRETE

Contact sense and digital I/O

FBM207, FBM217 and FBM219 families cover different voltage-monitor, contact-sense, discrete-input and discrete-I/O duties.

HART / UNIVERSAL

Device communication and configurable I/O

Check whether HART pass-through, mixed signal handling or software-configurable channels are required. FBM247 and redundant FBM248 support configurable current, voltage, digital and pulse functions.

COMMUNICATION

Fieldbus, PROFIBUS, Modbus and serial

FBM220/221, FBM222/223, FBM224 and FBM230 families serve different network and third-party device interfaces.

Match the Complete Hardware Chain

Controller
FCP, CP or installed system
Fieldbus and Power
HDLC/PIO path and supply
Baseplate
Standard or Compact slot
FBM
Exact model and variant
TA and Cable
Field wiring interface

Seven Checks Before Ordering

1. Exact hardware part number
Model suffix and P/RH code, not only the FBM family name.
2. Standard or Compact
Confirm form factor, baseplate, power and enclosure compatibility.
3. Signal and range
Input/output type, voltage/current range, HART or network protocol.
4. Channel architecture
Count, channel isolation, common isolation, readback and fail-safe behavior.
5. Redundancy
Simplex or redundant pairing, adapter and adjacent-slot requirements.
6. TA and cable
Match the approved Termination Assembly, terminal style and cable table.
7. Software and lifecycle
Controller support, system release, configuration and current product phase.

Manufacturer Family Examples

FBM201 / 201b / 201c / 201d / 201e

Analog-input variants cover model-specific ranges including 0–20 mA and multiple low-voltage or dc-voltage inputs. The lettered variant and PSS determine the exact range and performance.

FBM207 / 207b / 207c

Voltage-monitor and contact-sense input families differ in channel arrangement, voltage requirements, isolation and redundancy support.

FBM247 and FBM248

Software-configurable current, voltage, analog, digital and pulse I/O families; FBM248 is the redundant family. Confirm channel configuration and required TA.

Standard versus Compact 200 Series

Compact FBMs use a narrower high-density form factor and Compact baseplate architecture. A similar function name does not make Standard and Compact hardware mechanically interchangeable.

Replacement and Upgrade Notice

  • Do not select a replacement by FBM number alone; verify the full hardware code and lettered variant.
  • Standard and Compact modules can require different baseplates, power distribution, redundancy hardware and enclosure layouts.
  • A new FBM may require a different TA, cable, ECB/configuration or supported controller software release.
  • For redundant applications, confirm module pairing, adapter and slot-position rules from the exact PSS.
  • Check the current Schneider Electric preferred, available, mature or lifetime product listing before treating a newer model as a direct replacement.

Popular Foxboro FBM Products

What to Send for an Accurate RFQ

1. FBM label
Full model, P/RH number and revision
2. Installed system
Controller, software release and baseplate
3. Field interface
TA, cable, signal, range and channel count
4. Commercial request
Quantity, condition, destination and required date

Foxboro FBM Module FAQ

1. What information identifies the correct Foxboro FBM?

Use the complete model and hardware part number, including any lettered variant and P/RH code. Also record the controller, baseplate, software release, TA and cable.

2. Are Standard and Compact 200 Series FBMs interchangeable?

Not mechanically as a general rule. They use different form factors and baseplate architectures, even when the signal function is similar. An engineered migration may require multiple hardware changes.

3. Can the existing TA and field wiring be retained?

Only when the exact replacement FBM, TA and cable combination is supported. Check signal type, terminal style, redundancy, certification and any documented upgrade procedure.

4. What must be checked for a redundant FBM pair?

Confirm that the model supports redundancy, then check the matching partner, adapter, baseplate positions, fieldbus, power, TA and controller configuration.

5. How should a discontinued FBM replacement be evaluated?

Check the current manufacturer phase listing and the exact successor notice. A successor can require a different baseplate, TA, cable, software release, configuration or enclosure arrangement.

Need an FBM Quote or Replacement Review?

Send the complete FBM, TA and cable labels. Ask for current availability, lead time, testing information and warranty terms.

Submit Your RFQ

Technical examples are family-level references. Confirm the latest manufacturer PSS, certification table and product lifecycle notice for the exact hardware part number before installation or substitution.

As one of the leading foxboro fbm modules manufacturers and suppliers, we warmly welcome you to wholesale discount foxboro fbm modules from our factory. All our products are with high quality and competitive price.

Disclaimer:

PLCleader sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.

PLCleader is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.