Prosoft MVI69-DNP 3.0 Master/Slave Network Interface Module

The ProSoft MVI69-DNP DNP 3.0 Master/Slave Network Interface Module has 1 Slot and 40 Slave Devices. It also has 300 Supported User-defined Commands and 400 max. Events for Analog Inputs.

 

ProSoft Technology MVI69-DNP DNP 3.0 Master/Slave Network Interface Module for Allen-Bradley CompactLogix, 1 x RJ45 Serial Configuration Port (CFG), 2 x RJ45 RS-232, RS-485 or RS-422 (jumper selectable) Ports, acts as an input/output module between the DNP network and the CompactLogix processor

✉ sales7@apterpower.com

☏ +8618030175807

The MVI69-DNP is a ProSoft Ethernet Global Data Network Interface module. It is classified as an EGD series module and it is compatible with the CompactLogix series. This module comes with one slot and features the ladder logic data transfer protocol. The module comes with electrical isolation of 1500 VMS and has a power supply distance rating of 2. The dimensions rating for the MVI69-DNP is standard 1769 Single slot module with a current load of 800 mA at a maximum of 5 Volts DC. The MVI69-DNP serves as an ideal solution when the DNP 3.0 master/slave protocol connectivity is to be added to the CompactLogix platform. The MVI69-DNP i9s recognized as an input and output module and comes with access to processor memory for data transfer between the processor and the module.

DNP 3.0 Master/Slave Communication Module MVI69-DNP

The MVI69-DNP module is an ideal solution where DNP 3.0 Master/Slave protocol connectivity must be added to the CompactLogix platform.
The DNP solution addresses the expanding interest in the DNP 3.0 protocol. The protocol was originally developed for the power utility industry and is recommended by the IEEE for RTU-IED communication applications. Additional applications include Water/Wastewater and Oil and Gas industries.

The MVI69 DNP 3.0 module is a single slot, backplane compatible DNP 3.0 interface solution for the CompactLogix platform. This
module provides highly configurable support of both DNP 3.0 Master and Slave implementations (level 2 minimum), allowing the many
SCADA and field devices supporting the DNP protocol to be integrated into the powerful CompactLogix platform.

The module supports DNP Subset Level 2 features and some of the Level 3 features allowing the many SCADA and field devices
supporting the DNP protocol to be integrated into the CompactLogix platform. The module acts as an input/output module between the
DNP network and the CompactLogix processor. The data transfer from the CompactLogix processor is asynchronous from the actions
on the DNP network. Databases are user defined and stored in the module to hold the data required by the protocol.

Is ProSoft MVI69-DNP not the part you are wanting?

Check out the rest of our website to see what else we have to offer!