Product Brief
- Product No. : 330101-33-53-10-02-05
- Product Type : 3300 XL 8 mm Probe, 3/8-24 UNF thread, without armor
- Unthreaded Length: 33 represents 3.3 inch
- Overall Case Length: 53 represents 5.3 inch
- Total Length: 10 represents 1.0 meter (3.3 feet)
- Connector and Cable-Type: 02 represents Miniature coaxial ClickLoc connector, standard cable
- Agency Approval Option : 05 represents Multiple Approvals
- Extension Cable Capacitance：69.9 pF/m (21.3 pF/ft) typical
- Power：Requires -17.5 Vdc to -26 Vdc when installed with nonincendive circuit connected per installation drawing 140979 at 12 mA maximum consumption, -23 Vdc to -26 Vdc with barriers. Operation at a more positive voltage than -23.5 Vdc can result in reduced linear range.
Products Fature
- Working principle:
The probe measures the change in distance between the probe and the object under test through the principle of electromagnetic induction, thereby obtaining a vibration signal. These signals can be collected, analyzed, and displayed in various forms, such as spectrum diagrams, time waveform diagrams, etc.
- Main uses:
(1)Bearing fault diagnosis: It can detect bearing wear, oil shortage, foreign matter intrusion and other faults, so as to take maintenance measures in advance to avoid bearing damage.
(2)Unbalance monitoring: It can detect vibration caused by rotor imbalance, so as to adjust the balance of the equipment and reduce vibration.
(3)Poor alignment monitoring: It can detect poor alignment of the equipment, so as to adjust the alignment accuracy of the equipment, reduce vibration and wear.
(4)Impeller wear monitoring: It can detect the wear of the impeller, so as to evaluate the service life of the impeller and replace the worn impeller in time.
(5)Looseness monitoring: It can detect the looseness of the equipment, so as to tighten the loose parts in time to avoid equipment failure.
Keywords: Bently Nevada 330101-33-53-10-02-05; 330101-33-53-10-02-05 Nsv probe; 330101 33 53 10 02 05
About Installation
- Preparations before installation
(1) Confirm the probe model: Check the probe model again to ensure that it matches your device.
(2) Prepare tools: Prepare the tools required for installation, such as wrenches, screwdrivers, positioners, etc.
(3) Check the installation environment: Ensure that the installation location meets the installation requirements of the probe, such as temperature, humidity, vibration, etc.
(4) Understand the working principle of the probe: Be familiar with the measurement principle and working range of the probe.
- Precautions for installation
(1) Avoid contact with moving parts: The probe should be installed away from moving parts to avoid damage to the probe.
(2) Pay attention to cable protection: The cable should be properly fixed to avoid being squeezed or worn.
(3) Avoid environmental interference: The probe should be installed away from strong magnetic fields, high-frequency electromagnetic interference and other environments.
(4) Regular inspection: Regularly check the installation of the probe to ensure that it is firmly fixed and the connection is reliable.
If 330101-33-53-10-02-05is not the one you need, Click here!
Other Models you May be interested
| AB | ERPO | ICS TRIPLEX | HONEYWELL |
| 1203-GD1 | MMS6110 | CM 3201 | 51402573-150 |
| 1203-GU6 | MMS6120 | T3401 | 51402573-250 |
| 125760-01 | MMS6210 | T3411F | 51402592-100 |
| 1305-BA01A-HA2 | PR6424/006-030 | T3420A | 51402592-175 |
| 1305-BA03A | MMS6211 | T3480 | 51402615-400 |
| 1305-BA09A-HA2 | MMS6220 | T3481 | 10105/2/1 |
| 1305-KBA09 | MMS6250 | T3481A | 10105/2/1 |
| 1326AB-B430E-21 | MMS6312 | T7481A | 10201/2/1 |
| 1326AB-B515E-S2K5L | MMS6350 | T8110B | 10201/2/1 |
| 1326AB-B720E-S2L | PR6426/010-000 CON021 | T8122 | 10201/2/1 |
| 1336-B005-EAD-FA2-L1-S1 | PR6426/010-030 CON021 | T8151B | 10201/2/1 FC-SDO-0824 |
| 1336-BDB-SP38A | PR9268/203-000 | T8153C | 80363975-100 |
| 1336-BDB-SP4D 74103-244-54 | PR9268/301-000 | T8232 | 8C-PAIH51 51454352-175 |
| 1336-BDB-SP5C | PR9350/12 | T8310 | 8C-PAIMA1 51454473-175 |
| 1336-BDB-SP5D | UES815S | T8403 | 8C-PAIN01 51454356-175 |
| 1336-BDB-SP6A | PR6426/010-010 | T8403C | 8C-PAIN01 51454356-175 |
Quotation
Vicky
Whatsapp: +8618030175807
Skype: live:2435aba439730baa
Email: sales7@apterpower.com
Hot Tags: bently nevada 330101-33-53-10-02-05 3300 xl 8 mm probe, bently nevada 330101-33-53-10-02-05 3300 xl 8 mm probe manufacturers, suppliers, emergency stop button, actuator monitoring, plc programming for monitoring applications, dust collection system, peak load shaving, pressure monitoring sensor
