Brief Introduction
- Part Number: 330101-33-66-10-02-05
- Category: 3300 XL 8 mm Probe, 3/8-24 UNF thread, without armor
- Unthreaded Length：3.3inch
- Overall Case Length：6.6inch
- Total Length： 1.0 meter (3.3 feet)
- Connector and Cable：Miniature coaxial ClickLoc connector, standard cable
- Cable Length: 8.5 meters (27.9 feet)
- Connector Protector and Cable: Armored cable with connector protector
- Agency Approval： CSA, ATEX, IECEx Approvals
- Probe Relative Humidity: Less than a 3% change in Average Scale Factor (ASF) when tested in 93% humidity in accordance with IEC standard 68 2 3 for up to 56 days.
- Probe Pressure: 3300 XL 8 mm probes are designed to seal differential pressure between the probe tip and case. The probe sealing material consists of a Viton® O ring. Probes are not pressure tested prior to shipment. Contact our custom design department if you require a test of the pressure seal for your application.
More Parameters
Compliance and Certifications
- FCC
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: l This device may not cause harmful interference. l This device must accept any interference received, including interference that may cause undesired operation.
- EMC
European Community Directive: EMC Directive 2014/30/EU Standards EN 61000-6-2; Immunity for Industrial Environments EN 61000-6-4; Emissions for Industrial Environments
RoHS
European Community Directive: RoHS Directive 2011/65/EU
- Maritime
2019 Rules for Conditions of Classification, Part 1, 1-1-1/7.7, 1-1-A3, 1-1-A4 2019 Rules for Conditions of Classification, Part 1, Offshore Units and Structures 1-1-4/9.7, 1-1-A2, 1-1-A3
- Functional Safety
SIL 2, HFT = 0 SIL 3, HFT = 1
- Bently Nevada 330101-33-66-10-02-05 probes are designed to seal differential pressure between the probe tip and case. The probe sealing material consists of a Viton® O ring. Probes are not pressure tested prior to shipment. Contact our custom design department if you require a test of the pressure seal for your application.
keywords: 330101 33 66 10 02 05; Bently 330101-33-66-10-02-05 ; pdf 330101-33-66-10-02-05; 330101-33-66-10-02-05 datasheet
FAQ
Q: What types of equipment is this probe suitable for?
(1)Centrifugal compressors: Measure the vibration of the impeller and monitor the impeller wear and imbalance.
(2)Refrigeration compressors: Monitor piston movement and bearing vibration.
(3)Process gas compressors: Monitor rotor vibration and bearing condition.
(4)Other equipment with limited installation space: For example, measuring vibration in deep holes.
Q: How to install Bently Nevada 330101-33-66-10-02-05 probe?
(1)Select a suitable installation location: Select the best installation location based on the structure of the equipment and the location of the measurement point.
(2)Fix the base: Fix the base of the probe firmly on the equipment.
(3)Connect the cable: Connect the cable of the probe to the signal acquisition system of the equipment.
(4)Adjust the probe position: Adjust the position of the probe to keep it at an appropriate distance from the surface to be measured.
Q: What should be paid attention to during installation?
(2)Pay attention to cable protection: The cable should be properly fixed to avoid being squeezed or worn.
(3)Avoid environmental interference: The probe should be installed in a location away from strong magnetic fields, high-frequency electromagnetic interference and other environments.
Q: How to calibrate this probe?
Q: How many days the goods will arrive my hands if I place the order now?
Q: Can you use our shipping account?
More Bently Nevada
| 330130-085-00-05 | 330850-50-05 | 330180-90-05 | 330703-000-060-10-02-00 |
| 330130-085-00-CN | 330130-045-00-00 | 330180-90-CN | 330703-000-060-10-02-00 |
| 330130-085-01-00 | 330130-045-00-CN | 330180-91-00 | 330703-000-060-10-02-CN |
| 330171-00-08-10-02-00 | 330130-045-01-00 | 330190-040-01-CN | 330703-000-060-50-12-00 |
| 330171-08-24-10-02-00 | 330130-045-01-CN | 330190-045-01-CN | 330703-000-070-10-02-00 |
| 330173-00-05-10-12-00 | 330130-045-02-00 | 330190-080-01-00 | 330703-050-120-10-02-00 |
| 330173-00-06-10-02-00 | 330130-045-02-05 | 330193-00-05-10-00 | 330705-02-18-10-02-00 |
| 330173-00-18-10-02-05 | 330130-045-03-05 | 330354-040-24-05 | 330705-02-18-90-02-00 |
| 330173-07-11-10-02-00 | 330130-070-00-00 | 330400-01-CN | 330709-000-040-50-02-00 |
| 330180-50-00 | 330130-070-00-CN | 330400-02-CN | 330709-000-050-10-02-00 |
| 330180-50-CN | 330130-075-00-00 | 330500 VELOMITOR | 330709-000-060-10-02-00 |
| 330180-51-00 | 330730-040-00-00 | 330500-02-04 | 330709-000-060-10-02-00 |
| 330180-51-05 | 330730-040-00-00 | 330730-080-00-00 | 330730-040-03-00 |
| 330180-51-CN | 330780-90-CN | 330780-90-00 | 330780-91-00 |
Is Bently Nevada 330101-33-66-10-02-05 not the part you are wanting?
Check out the rest of our website to see what else we have to offer!
Hot Tags: bently nevada 330101-33-66-10-02-05 3300 xl 8 mm proximity probes, bently nevada 330101-33-66-10-02-05 3300 xl 8 mm proximity probes manufacturers, suppliers, pump monitoring, noise monitoring equipment, bearing monitoring, cable trays, cloud based monitoring system, pressure sensor
