Bently Nevada 330101-36-80-10-02-00 3300 XL 8 mm Probe

Manufacturer: Bently Nevada
Part Number: 330101-36-80-10-02-00
Origin: USA
Condition: brand new
Delivery Time: 3-5 days
HS Code: 8537101190
Shipping Weight: 0.18kg
Payment Term: 100% bank transfer in advance
Technical documents, COO certificate support
Alternative Part Number: 330101-36-80-10-02-05;330101-36-80-10-02-CN

Send Inquiry

Brief Introduction

Part Number: 330101-36-80-10-02-00
Unthreaded Length: 3 6 = 3.6 in
Overall Case Length: 8 0 = 8.0 in
Total Length: 10 = 1.0 meter (3.3 feet)
Connector and Cable-Type: 02 = Miniature coaxial ClickLoc connector, standard cable
Agency Approval: 00 =Not required

The Bently Nevada 330101-36-80-10-02-00 3300 XL 8 mm Probe is primarily used for vibration monitoring and analysis. It can be installed on rotating machinery, such as motors, pumps and compressors, to help detect and assess the condition of machinery to identify potential failures, reduce maintenance costs and improve equipment reliability. In addition, it can be used for real-time monitoring and data logging to support preventive maintenance and performance optimization

Parameters

Extension Cable Capacitance	69.9 pF/m (21.3 pF/ft) typical
Frequency Response	(0 to 10 kHz), +0, -3 dB, with up to 305 meters (1000 feet) of field wiring.
Standard 9 meter System	Less than ±0.038 mm (±1.5 mil) with components at 0°C to +45°C (+32°F to +113°F).
Standard 5 or 1 meter System	7.87 V/mm (200 mV/mil) ± 5% including interchangeability error when measured in increments of 0.25 mm (10 mils) over the 80 mil linear range from 0°C to +45°C (+32°F to +113°F).
Linear Range	2 mm (80 mils). Linear range begins at approximately 0.25 mm (10 mils) from target and is from 0.25 to 2.3 mm (10 to 90 mils) (approximately –1 to –17 Vdc).
Field Wiring	0.2 to 1.5 mm2 (16 to 24 AWG). Recommend using 3 conductor shielded triad cable and tinned field wiring. Maximum length of 305 meters (1,000 feet) between the 3300 XL Proximitor Sensor and the monitor. See the frequency response graphs, Figures 10 and 12, for signal rolloff at high frequencies when using longer field wiring length

(keywords:330101-36-80-10-02-00;330101-36-80-10-02-00;pdf 330101-36-80-10-02-00;330101-36-80-10-02-00 datasheet)

FAQ

Q: What is the operating temperature range of the Bently Nevada 330101-36-80-10-02-00 Probe?

A: The 3300 XL 8 mm Probe has an operating temperature range of -40°C to +260°C.

Q: What is the maximum proof pressure of the Bently Nevada 330101-36-80-10-02-00 Probe?

A: The 3300 XL 8 mm Probe has a maximum proof pressure of 1000 psi (70 bar).

Q: What is the sensitivity of the Bently Nevada 330101-36-80-10-02-00 Probe?

A: The sensitivity of the 3300 XL 8 mm Probe is typically 100 mV/g.

Q: What is the resonance frequency of the Bently Nevada 330101-36-80-10-02-00 Probe?

A: The resonance frequency of the 3300 XL 8 mm Probe is typically 22 kHz.

Q: What is the mounting style of the 3300 XL 8 mm Probe?

A: The 3300 XL 8 mm Probe is typically mounted using a stud or bolt.

Q: What is the warranty?

A: 12 Months

Q: What is the difference between a reverse-mount probe and a standard-mount probe?

A: The reverse-mount probe is designed so that the probe head can be installed from the back of the device, which is suitable for devices with limited installation space or that require special angles compared to standard-mount probes. Reverse-mount probes are more convenient in some compact devices or scenarios where the probe cable needs to be kept neat.

Q: What should I pay attention to when installing this probe?

A: When installing the 330101-36-80-10-02-00 probe, pay attention to the following points: Make sure the probe is correctly reverse-mounted and the cable is secure. The gap between the probe and the target object should be kept within the range recommended in the product manual. Make sure the contact surface between the probe head and the monitoring device is clean and free of oil to prevent signal quality.

Is Bently Nevada 330171-00-35-10-02-05 not the part you are wanting?
Check out the rest of our website to see what else we have to offer!

Need Help?

Vicky

E-mail : sales7@apterpower.com

Mobile/Whatsapp : +8618030175807

Skype : live:2435aba439730baa

Hot Tags: bently nevada 330101-36-80-10-02-00 3300 xl 8 mm probe, bently nevada 330101-36-80-10-02-00 3300 xl 8 mm probe manufacturers, suppliers, oil debris monitoring, wireless monitoring solution, pump monitoring, inclinometer, surface roughness measurement, energy efficiency monitoring