Bently Nevada 330102-00-10-10-01-05 3300 XL 8 mm Armored Probe

• Bently Nevada 3300 XL 8 mm armored probe
• Exact P/N: 330102-00-10-10-01-05
• 3/8-24 UNF case with metallic cable armor
• 1.0 in case and 0.0 in unthreaded length
• 1.0 m total probe length
• ClickLoc connector with connector protector
• Option 05: CSA, ATEX and IECEx approvals
Send Inquiry
Description

330102-00-10-10-01-05: Armored 3300 XL 8 mm Probe

Bently Nevada 330102-00-10-10-01-05 is a 3300 XL 8 mm proximity probe with a 3/8-24 UNF threaded case and armored lead. This configuration combines a 1.0 in overall case length with a 1.0 m total probe length and a miniature coaxial ClickLoc connector with protector.

The short case and armored cable make the mounting space and cable exit route particularly important during replacement. We can check the requested ordering code against the part number and photographs you supply.

3/8-24 UNFWith Armor1.0 in Case1.0 m Total LengthProtected ClickLoc
330102Armored probe construction
01Connector protector option
05CSA / ATEX / IECEx ordering option

Armored Lead and Short-Case Installation

The flexible metallic armor visible on the lead provides a different physical arrangement from the unarmored 330101 probe family. The armored section, cable exit and probe holder must all fit the existing machinery layout.

  • Mounting: 3/8-24 UNF threads with 0.0 in unthreaded length.
  • Space: 1.0 in overall case length.
  • Routing: Check available clearance for the armored lead, especially near bends and clamps.
  • Handling: Protect the probe tip and connector during removal and installation.

Armor does not eliminate minimum cable-bend or installation-clearance requirements. Use the existing machine documentation when evaluating the route.

330102-00-10-10-01-05 proximity probe showing the metallic armored lead and threaded tip

Armored probe and lead arrangement.

Exact Ordering Code and Specifications

The dash options distinguish this probe from other 330102 configurations. In particular, the first 10 is the 1.0 in case-length code, while the second 10 is the 1.0 m total-length code.

Code Specification This Configuration
330102 Base probe 3300 XL 8 mm; 3/8-24 UNF thread; with armor
00 Unthreaded length 0.0 in
10 Overall case length 1.0 in
10 Total probe length 1.0 m (3.3 ft)
01 Connector and cable Miniature coaxial ClickLoc with connector protector; standard cable
05 Agency approval option CSA, ATEX and IECEx ordering option; check the actual supplied-item marking and applicable scope

For the manufacturer's complete option definitions, consult the 3300 XL 8 mm proximity transducer datasheet.

ClickLoc Connector and Protector: What to Match

330102 armored proximity probe with blue cable section and coaxial connector

Probe and cable termination from another viewing angle.

Option 01 specifies a miniature coaxial ClickLoc connector with a connector protector and standard cable. It is not the FluidLoc cable option, which has a different ordering code.

  • Compare the mating connector on the installed Proximitor Sensor system.
  • Allow room to fit and remove the connector protector.
  • Inspect the cable-to-connector transition and the surrounding cable route.
  • Keep the original probe label or previous purchase reference for exact-part identification.

A 1.0 m System Does Not Use an Extension Cable

For a standard 1.0 m 3300 XL system, the probe connects to a matching Proximitor Sensor without an extension cable. This differs from the longer 5 m and 9 m system configurations.

330102 Probe1.0 m total probe length
→
Compatible Proximitor Sensor1.0 m system configuration

The required Proximitor Sensor should be identified from the installed system. Do not select a 5 m or 9 m sensor solely because it belongs to the same 3300 XL family. Explore the 3300 XL proximity transducer systems range for related components.

Four Details to Send with a Replacement Inquiry

01 / IDENTIFICATION

Original Probe Marking

Provide the full 330102-00-10-10-01-05 number or a clear photograph of the existing label, including any suffix.

02 / MOUNTING

Probe Holder and Cable Route

State whether the installed part uses a 1.0 in case and armored cable. Photos of the mounting area can clarify access restrictions.

03 / SYSTEM

Connected Sensor

Provide the Proximitor Sensor model or system length. This is especially relevant when the previous system has been modified.

04 / PURCHASE

Quantity and Destination

Include required quantity, destination country, requested delivery date and any documents your maintenance team needs.

We confirm the quoted item's condition, availability, packing arrangements and applicable warranty terms for the specific offer. The approval markings and supporting documents should be checked against your installation requirements.

Request Armored Probe Quote

Related Bently Nevada Parts

For connected components and other 3300 XL configurations, browse Bently Nevada cables and accessories. The broader Bently Nevada parts range includes monitoring and maintenance components.

If the original label is unclear, contact PLCLeader with photographs of the installed probe and connector rather than selecting a substitute by appearance alone.

Frequently Asked Questions

Is the metal armor part of the 330102 probe configuration?+

Yes. The 330102 base model is the armored 3/8-24 UNF version of the 3300 XL 8 mm probe. The unarmored version uses the 330101 base number.

Can the armored lead be bent sharply behind the probe holder?+

Do not assume so. Allow sufficient routing space and follow the applicable cable-bend and mounting requirements. A photograph of the existing route is useful when comparing replacement parts.

Does connector option 01 mean FluidLoc cable?+

No. Option 01 is a ClickLoc connector with connector protector and standard cable. FluidLoc configurations use separate option codes.

Should I order an extension cable with this 1.0 m probe?+

Not for a standard 1.0 m 3300 XL system. The manufacturer specifies that one-meter systems do not use an extension cable. Match the probe with the correct 1.0 m Proximitor Sensor configuration.

Does approval code 05 cover every hazardous-area installation?+

No. Code 05 identifies the CSA, ATEX and IECEx approval option. The supplied item's markings, certificate scope and the site's classification must still be checked for the intended installation.

Quote the Exact 330102-00-10-10-01-05 Probe

Send your quantity, destination and required timing. For a replacement, attach the original label or a clear probe photograph and the connected Proximitor Sensor identification.

Request Armored Probe Quote

Hot Tags: 330102-00-10-10-01-05, Bently Nevada 330102, 3300 XL 8 mm armored probe, armored proximity probe, 3/8-24 UNF probe, ClickLoc connector protector, Bently Nevada replacement probe, 330102 hazardous-area approved probe, data-driven machinery maintenance probe, 330102 probe dimensional inspection, 1.0 m total probe length, 330102 proximity sensor replacement, 330102 machinery protection sensor

Hot Tags: 330102-00-10-10-01-05, Bently Nevada 330102, 3300 XL 8 mm armored probe, armored proximity probe, 3/8-24 UNF probe, ClickLoc connector protector, Bently Nevada replacement probe, asset management software, data driven maintenance, optical comparator, level sensor, pressure sensor, load management system

Disclaimer:

PLCleader sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.

PLCleader is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.