Bently Nevada 330102-04-25-10-02-00
Armored 3300 XL 8 mm probe with 3/8-24 UNF thread, 0.4 in unthreaded length, 2.5 in case length and 1.0 m total length.
Verified Configuration
| Probe family | 3300 XL 8 mm |
|---|---|
| Thread and construction | 3/8-24 UNF; armored |
| Unthreaded / case length | 0.4 in / 2.5 in |
| Total length | 1.0 m (3.3 ft) |
| Connector and cable | Miniature coaxial ClickLoc connector; standard cable; no connector protector |
| Approval option | 00 - approvals not required |
Applications
Non-contact radial vibration, axial position, Keyphasor and speed measurements on fluid-film bearing machines using a matched 3300 XL 8 mm transducer system.
Lifecycle Status
The 3300 XL 8 mm system remains in the manufacturer current product portfolio and Datasheet 141194 is current. No public model-specific discontinuation date was identified.
Replacement and Compatibility
Complete interchangeability applies within a correctly matched 3300 XL 8 mm family, but the replacement still must match the complete order code and total system electrical length. Do not mix 7200, NSv, 11 mm or 25 mm components.
Manufacturer Reference Basis
Bently Nevada 3300 XL 8 mm Proximity Transducer System Datasheet 141194. Specifications and lifecycle wording are limited to the information available in the reviewed manufacturer publications. No external website links are included on this product page.
Frequently Asked Questions
1. What is Bently Nevada 330102-04-25-10-02-00?
330102-04-25-10-02-00 is a 3300 XL 8 mm proximity probe. Armored 3300 XL 8 mm probe with 3/8-24 UNF thread, 0.4 in unthreaded length, 2.5 in case length and 1.0 m total length.
2. Is 330102-04-25-10-02-00 discontinued?
The 3300 XL 8 mm system remains in the manufacturer current product portfolio and Datasheet 141194 is current. No public model-specific discontinuation date was identified.
3. Can another part number directly replace 330102-04-25-10-02-00?
Complete interchangeability applies within a correctly matched 3300 XL 8 mm family, but the replacement still must match the complete order code and total system electrical length. Do not mix 7200, NSv, 11 mm or 25 mm components.
4. What should be included in an RFQ?
Send the complete manufacturer part number and suffix, quantity, condition requirement, destination country, required delivery date, clear nameplate photos and the installed probe/cable/signal-conditioner or monitor details.
5. Where is 330102-04-25-10-02-00 typically used?
Non-contact radial vibration, axial position, Keyphasor and speed measurements on fluid-film bearing machines using a matched 3300 XL 8 mm transducer system.
Recommended Products
Explore other frequently requested industrial automation parts. Every link stays inside PLC Leader.
