330104-00-08-10-01-05: M10 Armored 8 mm Probe
Bently Nevada 330104-00-08-10-01-05 is a 3300 XL 8 mm proximity probe with M10 × 1 mounting threads and cable armor. Its ordering code specifies a 0 mm unthreaded length, 80 mm case, 1.0 m total probe length, standard cable with a ClickLoc connector protector, and the 05 approval option.
For a replacement order, confirm the complete code rather than matching only the 330104 series. The armored metric housing, 80 mm case and connector protector distinguish this configuration from other probes in the same family.
What Each Ordering Segment Specifies
The standard metric armored 8 mm probe uses the ordering format 330104-AA-BB-CC-DD-EE. For this part number, the first two options describe the mechanical dimensions; the next two define total length and the cable connection.
| Code | OEM Meaning | This Part |
|---|---|---|
| 330104 | Probe family | 3300 XL 8 mm, M10 × 1 thread, with armor |
| 00 | Unthreaded length (AA) | 0 mm |
| 08 | Overall case length (BB) | 80 mm |
| 10 | Total probe length (CC) | 1.0 meter (3.3 feet) |
| 01 | Connector and cable (DD) | Miniature coaxial ClickLoc connector with connector protector, standard cable |
| 05 | Agency approval (EE) | CSA, ATEX, IECEx approval ordering option |
Dimensions and Cable Protection
Product view of the armored M10 probe and ClickLoc lead; confirm the 80 mm case and 1.0 m ordered length from the full part number.
The case length and the probe total length are different measurements. Do not use the 80 mm case dimension as the cable length, or substitute an unarmored 330103 probe solely because it uses the same metric thread.
One-Meter System Matching
A 1.0 m 3300 XL 8 mm probe can form a 1.0 m transducer system with an appropriately matched Proximitor Sensor. The OEM specifies that one-meter systems do not use an extension cable. A longer system requires a different probe/cable combination matched to the Proximitor length.
The 1.0 m armored probe connects directly to the correctly matched Proximitor Sensor; no extension cable is used.
Do not transfer total-length assumptions from 5 m or 9 m 3300 XL systems to this part. Check the installed Proximitor model, its configured system length and any approval-specific requirements before replacement.
Mechanical Replacement: Six Checks
Match the label or maintenance record to the exact 330104-00-08-10-01-05 number and confirm any revision requirement.
Verify M10 × 1 threading and the installed probe holder or bracket; 3/8-24 threaded versions are not mechanical matches.
Check the 80 mm case, zero unthreaded length, available adjustment and required sensing gap.
Check routing through conduit, the armor termination and the available service clearance.
Confirm 1.0 m probe total length, miniature ClickLoc interface and connector protector.
Confirm the Proximitor Sensor and applicable approvals for the machine installation.
Photographs of the probe marking, cable termination and existing holder can resolve uncertainties in the installed configuration.
What to Confirm in the Quotation
Before ordering, specify the required quantity, item condition and destination. We confirm availability, documentation and delivery terms against the item offered.
Confirm whether the quoted unit meets the requested condition and revision.
Check quantity, current lead time, destination and packaging requirements.
Specify any necessary identification, origin and approval documentation before ordering.
Review warranty, commercial conditions and the exact item description in the quotation.
3300 XL 8 mm specifications and original ordering codes.
Related Component and Supplier Information
Company details are available at About PLCLeader.
Frequently Asked Questions
Yes. The OEM lists 330104 as the M10 × 1 threaded 3300 XL 8 mm probe with armor. The rest of the ordering number specifies dimensions, length, cable/connector and approval options.
Not without checking the installation. These probes share the M10 × 1 metric family, but armor affects the cable routing and mounting clearance. Compare the complete existing part number, mechanical arrangement and electrical system before substitution.
Not in a correctly configured 1.0 m 3300 XL system: the OEM specifies that one-meter systems do not use an extension cable. Confirm the Proximitor Sensor system-length configuration before replacing components.
No. Option 01 specifies standard cable and a miniature coaxial ClickLoc connector with connector protector. FluidLoc cable uses different connector/cable ordering options.
Check space for the armor termination, cable routing and the ClickLoc connector protector. Avoid forcing sharp bends at the armor ferrule; use the applicable OEM mounting and cable-routing requirements for the installed machine.
Request 330104-00-08-10-01-05
Send us your exact armored metric probe requirement so we can confirm the offered part identity and quotation terms.
- Full part number and required revision
- Quantity and item condition
- Proximitor model or system length
- Destination country
- Existing probe label or photographs
- Required approval documentation
Hot Tags: 330104-00-08-10-01-05, Bently Nevada 330104, 3300 XL 8 mm probe, armored proximity probe, M10 proximity sensor, ClickLoc connector, photocells, data driven maintenance, proximity sensor, pressure fluctuation monitoring, mobile monitoring application, radiography for non destructive testing


