Bently Nevada 330104-01-08-50-01-CN 3300 XL 8 mm Probe

• Bently Nevada 330104-01-08-50-01-CN probe
• Armored 3300 XL 8 mm proximity probe
• M10 x 1 metric threaded case
• 10 mm unthreaded; 80 mm overall case
• Nominal 5.0 m total probe length
• DD01: protected ClickLoc, standard cable
• CN: China hazardous-area approval option
Send Inquiry
Description

330104-01-08-50-01-CN Armored 8 mm Probe

Bently Nevada 330104-01-08-50-01-CN is a 3300 XL 8 mm proximity probe with an M10 x 1 metric threaded case and protective cable armor. Its specified case has a 10 mm unthreaded section and an 80 mm overall length.

The probe has a nominal 5.0 m total length, standard cable, a miniature coaxial ClickLoc connector with protector, and the CN China-specific hazardous-area approval option.

M10 x 1 Armored metric probe case
5.0 m Nominal total probe length
CN China hazardous-area approval option

The complete ordering code identifies the mounting geometry, cable connection and certification selection. All three must suit the installed 3300 XL system.

Armored Metric Construction and Case Dimensions

Bently Nevada 330104 series armored metric 8 mm proximity probe with metal cable armor and threaded sensor case

330104 series construction reference. The illustrated unit is 330104-01-06-50-02-05, not the exact CN configuration.

M10 x 1 Threaded Case with Cable Armor

The 330104 family uses an M10 x 1 metric case with metal armor surrounding the probe cable. The armor helps protect the lead against mechanical contact.

In this configuration, AA01 selects the 10 mm unthreaded portion and BB08 selects the 80 mm overall case length.

Both dimensions affect mounting fit and usable probe positioning. The mounting hole, threaded engagement and shaft clearance should correspond to the installed hardware.

10 mm AA01 unthreaded length
80 mm BB08 overall case length

A 60 mm 330104 case is not automatically a substitute for this 80 mm case. The extra 20 mm affects the mounting geometry and available adjustment.

330104-01-08-50-01-CN Ordering Specifications

The 330104 ordering sequence is Part Number-AA-BB-CC-DD-EE. For this probe, the selected codes define an armored metric case, protected ClickLoc connector and CN approval option.

Code Ordering Field Selected Configuration
330104 Base probe 3300 XL 8 mm, M10 x 1 thread, armored construction
AA = 01 Unthreaded length 10 mm
BB = 08 Overall case length 80 mm
CC = 50 Total probe length Nominal 5.0 m (16.4 ft)
DD = 01 Connector and cable Miniature coaxial ClickLoc connector with protector, standard cable
EE = CN Agency approval China-specific hazardous-area approval option

Full dimensions and ordering definitions: Bently Nevada 3300 XL 8 mm Datasheet .

Matching the 5 m Probe to a 330180 Proximitor

The CC50 option provides a nominal 5.0 m probe assembly. This length is intended for a matching 5 m 3300 XL 8 mm Proximitor Sensor.

Nominal 5 m Transducer Configuration
330104-01-08-50-01-CN Armored 8 mm probe Nominal total length: 5.0 m
→
330180 Proximitor Matching 5 m system configuration Mounting and approvals selected separately

A 5 m probe connects to the corresponding 5 m Proximitor without adding an extension cable to reach the nominal length.

330180 5 m Mounting Choices

Panel or DIN Mount

The 330180-50 configuration is the 5 m panel-mount option. The 330180-51 configuration specifies 5 m DIN mounting.

Without Mounting Hardware

The 330180-52 configuration specifies a 5 m system without mounting hardware. Its approval selection remains a separate field.

System compatibility: Do not add an extension cable simply because other 3300 XL installations use one. The combined probe and cable length must match the Proximitor system specification.

CN Hazardous-Area Approvals and China Requirements

The CN suffix is a China-specific hazardous-area approval ordering option. The manufacturer's country-specific guide identifies applicable NEPSI and CCC requirements, as well as ATEX/IECEx markings where applicable.

Selected: CN China Hazardous-Area Option

CN is the selected certification code for this probe. The approved markings and installation conditions must match the supplied equipment.

CN is not a country-of-origin designation.

Different Ordering Options CN0, 00 and 05

CN0 is a separate China safe-area option in the general approval guide. It is not listed as an available selection for the 330104 family in the current product matrix.

The 00 option is for applications where approval is not required. The 05 option identifies the listed multiple agency approvals.

Hazardous-area replacement: A different approval suffix must not be accepted solely because the probe dimensions are identical. Check the actual equipment marking, certificate and installation conditions.

Country-specific approval details: Bently Nevada Approvals Quick Reference Guide .

DD01 Connector Protector and Cable Differences

DD01 is the selected connection option for this probe. It includes a miniature coaxial ClickLoc connector, a connector protector and standard cable.

DD Option Connector Cable Construction
DD01 ClickLoc with connector protector Standard cable
DD02 ClickLoc without the specified protector Standard cable
DD11 ClickLoc with connector protector FluidLoc cable

Why the Protector Matters

DD01 specifies the connector protector as part of the probe assembly. Its presence should be checked when inspecting an offered replacement.

A DD02 probe may have the same standard cable but lacks that selected protector configuration.

Armor Is Not FluidLoc

The 330104 family provides external metal cable armor. FluidLoc is a separate cable construction intended to restrict fluid migration through the cable interior.

This target model uses DD01 standard cable, not DD11 FluidLoc.

Replacement Fit and Probe Identification

This configuration differs from other 330104 probes in its case length, connector protector and CN approval selection. Those differences affect the replacement decision even when the probe family and sensing diameter match.

Probe Mounting M10 x 1 threaded case, 10 mm unthreaded length and 80 mm overall case.
Armor and Connector Armored cable assembly with DD01 protected ClickLoc connection.
Transducer Length Nominal 5 m probe with a matching 5 m 330180 Proximitor.
Approval Identification CN order code, actual product marking and applicable certification documents.

Comparison with a Related 330104 Version

The 330104-01-06-50-02-05 has the same armored metric probe family, 10 mm unthreaded portion and 5 m length. However, its case is 60 mm rather than 80 mm, it uses DD02 without the selected protector, and its approval option is 05 instead of CN.

A related 330104 probe should only be considered after checking the mounting clearance, connector assembly, system length and required approval markings.

330104-01-08-50-01-CN Frequently Asked Questions

Does CN specify China hazardous-area approvals or country of origin? +

CN is a China-specific hazardous-area approval ordering option, covering applicable NEPSI and CCC requirements. It is not a manufacturing-origin code. The equipment marking and certificates must be checked for the actual installation.

Can a DD02 probe replace the DD01 connector configuration? +

DD01 includes a connector protector with the standard ClickLoc cable. DD02 uses the standard ClickLoc cable without that selected protector. The installation and replacement specification should be checked before changing options.

Does the 5.0 m probe need an additional extension cable? +

The CC50 probe already provides a nominal 5.0 m total assembly length. A matching 5 m 330180 Proximitor is required. An additional extension cable is not needed to reach that system length.

How is the 80 mm case different from a 60 mm 330104 case? +

BB08 specifies an 80 mm overall case length, compared with 60 mm for BB06. The difference affects threaded mounting geometry and probe adjustment. Both the case length and unthreaded portion must suit the machine.

Is armored standard cable the same as FluidLoc cable? +

No. Armor is the external mechanical protection of the 330104 probe lead. FluidLoc is a separate cable option designed to restrict fluid migration through the cable interior. DD01 specifies standard cable.

Can a 330103 unarmored probe replace this 330104? +

A direct replacement should not be assumed. Both families have M10 x 1 metric threaded cases, but 330104 includes metal cable armor. The case dimensions, cable construction, connector selection and approval option must also match.

What markings and system details should be checked before ordering CN? +

Confirm the complete probe part number, M10 x 1 mounting, 80 mm case, 5 m system length and DD01 connector. Check the required hazardous-area marking, applicable certificate and installed 330180 Proximitor configuration.

Related Bently Nevada 3300 XL Components

The 330104 belongs to the 3300 XL 8 mm proximity transducer system. Mechanical dimensions, connector options and certification selections differ among related probes.

Request 330104-01-08-50-01-CN Availability

Request a quotation for Bently Nevada 330104-01-08-50-01-CN, including the required quantity, preferred condition and destination country.

For an installed-system replacement, send the original probe identification, matching Proximitor model, required approval markings and any available nameplate photographs. The offered item's condition and documentation can be confirmed with the quotation.

Request a 330104-CN Probe Quote

Hot Tags: 330104-01-08-50-01-CN, Bently Nevada 330104, 3300 XL 8 mm probe, armored proximity probe, M10 x 1 probe, 5m Bently Nevada probe, CN approval probe, 330104 armored 8 mm proximity probe, 330104-01-08 80 mm probe case, 330104 DD01 ClickLoc connector, 5 m 330180 Proximitor system, 3300 XL CN approval probe, M10 x 1 armored probe

Hot Tags: 330104-01-08-50-01-CN, Bently Nevada 330104, 3300 XL 8 mm probe, armored proximity probe, M10 x 1 probe, 5m Bently Nevada probe, CN approval probe, bearing monitoring, pressure fluctuation monitoring, industrial enclosures, rotating equipment monitoring, displacement sensor, soft starters

Disclaimer:

PLCleader sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.

PLCleader is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.