Bently Nevada 330105-02-12-05-02-05 Reverse Mount Probe

• Bently Nevada 330105-02-12-05-02-05
• 3300 XL 8 mm reverse mount proximity probe
• 3/8-24 UNF threaded mounting
• 0.5 m total probe length
• Miniature ClickLoc coaxial connector
• Multiple approvals ordering option 05
• Exact part number matching for MRO replacement
Send Inquiry
Description

330105-02-12-05-02-05: Exact Probe Identification

Bently Nevada 330105-02-12-05-02-05 is a 3300 XL 8 mm reverse mount proximity probe. Its specified configuration combines 3/8-24 UNF mounting threads, a 0.5 m total probe length, a miniature ClickLoc coaxial connector and the multiple-approvals ordering option.

The 330105 reverse mount construction is important when replacing probes in compatible external housing arrangements. Thread size alone is not sufficient to confirm a replacement: the mounting orientation, probe length, connector and electrical system configuration must also match.

3300 XL 8 mm Reverse Mount 3/8-24 UNF 0.5 m Miniature ClickLoc

Ordering Code: 330105-02-12-05-02-05

The OEM spare probe ordering format is 330105-02-12-CC-DD-EE. The fixed 330105-02-12 designation identifies the reverse mount probe configuration, while the final three fields specify total length, connector and agency approval.

Code OEM Field This Configuration
330105-02-12 Base configuration 3300 XL 8 mm reverse mount probe, 3/8-24 UNF mounting thread
05 Total length 0.5 meter (1.6 feet)
02 Connector Miniature ClickLoc coaxial connector
05 Agency approval Multiple approvals
Approval verification: Option 05 identifies the OEM multiple-approvals ordering choice. The actual approval scope must be checked against the relevant documentation and installation requirements.

Probe Construction and Connection Details

The reverse mount probe uses a threaded stainless-steel style housing arrangement with an 8 mm sensing tip and an attached coaxial cable. The specified ClickLoc connector is at the cable end.

Bently Nevada 330105-02-12-05-02-05 reverse mount probe with blue cable, threaded body and coaxial connector
3300 XL 8 mm reverse mount probe with attached cable and connector.
Reverse Mount Design The mounting arrangement differs from standard forward-mount probe geometry.
Thread Interface 3/8-24 UNF threads must match the existing mechanical installation.
Probe Length The 0.5 m option defines the ordered probe total length, not the complete transducer system length.
Cable Connection Miniature ClickLoc coaxial connector; verify the mating connection before replacing an installed probe.

For an installation with limited access around the probe housing, check the connector clearance, cable exit direction and probe removal space before maintenance work begins.

Where the Probe Fits in a 3300 XL System

The probe forms the sensing element of a compatible 3300 XL proximity transducer system. The extension cable, when used, and the matching Proximitor Sensor complete the electrical measurement chain.

8 mm Probe 330105 reverse mount sensing element installed at the measurement point
Extension Cable Selected for the required electrical system length and mating connector
Proximitor Sensor Matching signal-conditioning component for the specified transducer system

A 0.5 m probe does not by itself establish whether the complete arrangement is a 1 m, 5 m or 9 m system. Confirm the installed extension cable and Proximitor model before selecting replacement components.

Electrical compatibility: A replacement probe must match the intended transducer family and electrical configuration, not merely the sensing tip diameter or connector appearance.

Reverse Mount Probe vs. Complete Housing Assembly

A 330105 spare probe and a configured 21000 or 24701 probe housing assembly represent different replacement requirements. Identifying which components are being replaced helps avoid ordering an incomplete or mechanically unsuitable assembly.

Replacing the Probe Only

Confirm the original 330105 ordering number, existing sleeve compatibility, thread engagement, installed penetration and cable routing.

Retained mounting hardware must be suitable for the replacement probe.

Replacing the Housing Assembly

Identify the complete housing part number, sleeve length, penetration dimensions, fittings and mounting arrangement.

The probe ordering number alone does not define every housing component.

A standard 330101 probe should not be treated as a direct mechanical replacement for a 330105 reverse mount probe without checking the actual OEM installation requirements.

Five Checks for an Accurate Replacement

For maintenance and rotating equipment spare-part purchases, the original label and installed equipment information provide the starting point for part matching.

1. Exact Ordering Number

Confirm every segment of 330105-02-12-05-02-05, including connector and approval options.

2. Mounting Geometry

Check reverse mount direction, 3/8-24 UNF threads, housing clearance and penetration.

3. Electrical System Length

Identify the probe length, extension cable and connected Proximitor Sensor.

4. Connector and Revision

Compare the miniature ClickLoc connection and available installed component identification or revision markings.

5. Required Approval

Confirm the approval requirements for the equipment installation and destination market.

Supporting Identification

Include the original probe label and photographs of the existing mounting arrangement.

Supply and Order Confirmation

We review the requested part number, quantity and destination against the offered item before confirming supply. Item condition, stock, delivery schedule and warranty terms depend on the specific quotation.

Purchase Item Confirmation Required
Part number Full OEM number and any required revision or suffix
Quantity Number of probes required for the maintenance order
Condition Condition offered for the actual quoted item
Availability Current stock status and quotation-specific lead time
Documentation Any required item identification, approval or origin documents
Shipment Destination, packaging and agreed shipping terms

If the installed probe marking is incomplete, send us photographs of the component and the associated equipment information so the replacement requirement can be reviewed before quotation.

OEM Technical Documentation

Bently Nevada document 141600 covers the 21000 and 24701 proximity probe housing assemblies and identifies the spare 3300 XL 8 mm reverse mount probe ordering configurations.

21000 and 24701 Proximity Probe Housing Assemblies - Datasheet 141600

Manufacturer ordering information and housing configuration reference.

For broader proximity measurement technology, see the Bently Nevada proximity sensor range .

Related Parts and Support

Complete transducer matching may involve additional Bently Nevada components or the original external probe housing.

Learn more about PLCLeader, or contact our team with your existing component details.

Frequently Asked Questions

Is 330105-02-12-05-02-05 a reverse mount probe? +

Yes. It belongs to the Bently Nevada 3300 XL 8 mm reverse mount probe range. The 330105-02-12 configuration uses 3/8-24 UNF mounting threads.

Can I use a standard 330101 probe in place of 330105? +

Do not assume interchangeability. The mounting configuration and installed housing must be checked, along with the probe length, connector and complete measurement system.

Does the 0.5 m probe determine the total system length? +

No. The 0.5 m value identifies the probe total-length option. The electrical system length also depends on the extension cable arrangement and the matching Proximitor Sensor.

Does a 330105 spare probe include the complete housing? +

The 330105 ordering number identifies the spare probe. A complete 21000 or 24701 housing assembly has its own ordering configuration. Confirm which assembly components are required before ordering.

What does the final 05 approval option mean? +

The final 05 indicates the OEM multiple-approvals ordering option. Confirm that the applicable approval documentation covers the actual installation requirements.

Request 330105-02-12-05-02-05

Send us your exact Bently Nevada reverse mount probe requirement. We can review the part identification and confirm the commercial details for the quoted item.

  • Complete part number
  • Required quantity
  • Installed revision or label
  • Probe or housing photographs
  • Destination country
  • Required item condition

Hot Tags: 330105-02-12-05-02-05, Bently Nevada 330105, 3300 XL 8 mm probe, reverse mount probe, ClickLoc connector, 3/8-24 UNF probe, 0.5 m probe, approval option 05, 330105 reverse mount proximity probe, 330105 multiple-approval probe, 3/8-24 UNF reverse mount probe, 330105 MRO replacement probe, 3300 XL 8 mm proximity system, 330105 0.5 m ClickLoc probe

Hot Tags: 330105-02-12-05-02-05, Bently Nevada 330105, 3300 XL 8 mm probe, reverse mount probe, ClickLoc connector, Bently Nevada replacement probe, gearbox monitoring, safety monitoring in industry, motor current analysis, preventive maintenance strategies, energy management system, data driven maintenance

Disclaimer:

PLCleader sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.

PLCleader is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.