Bently Nevada 330195-02-12-50-00 3300 XL 8 mm ETR Reverse-Mount Probe

Bently Nevada 330195-02-12-50-00 — 330195 3300 XL 8 mm ETR 3/8-24 reverse-mount proximity probe, 5 m.
✓ Original Product Verification✓ Ready Stock Check✓ Exact Model Review✓ 24-Hour Online Quotation
Send Inquiry
Description
BENTLY NEVADA PRODUCT INFORMATION

330195-02-12-50-00

Bently Nevada 330195-02-12-50-00 3300 XL 8 mm ETR Reverse-Mount Probe

330195-02-12-50-00 is a 3300 XL 8 mm Extended Temperature Range reverse-mount probe with fixed 3/8-24 family geometry, 5.0 m total length and no agency-approval option requested. Every value below is tied to this complete ordering code and is not copied from a similar suffix.

Confirmed Product Information

Manufacturer Bently Nevada, a Baker Hughes business
Probe family 330195 3300 XL 8 mm Extended Temperature Range reverse-mount probe, 3/8-24 UNF thread
Fixed family code 02-12 Manufacturer ordering line 330195-02-12-CC-DD identifies the reverse-mount 3/8-24 construction
Total length option 50 5.0 m (16.4 ft)
Agency approval option 00 Not required
Nominal system linear range 2.0 mm (80 mil)
Nominal scale factor 7.87 V/mm (200 mV/mil)
Temperature construction Extended Temperature Range probe with PFA cable
Required system relationship The 5 m probe is designed for use with the 5 m Proximitor sensor only

Applications

Reverse-mount non-contact radial vibration and shaft-position measurement.
High-temperature 3300 XL 8 mm installations requiring rear-side probe mounting.
Matched 5 m systems using the documented 330195 ETR reverse-mount family.

Confirmed Compatibility And Installation Conditions

1
Use the 5 m probe with the 5 m 3300 XL 8 mm Proximitor sensor only, and verify the matched system before installation.
2
Reverse-mount geometry is not interchangeable with a standard forward-mount probe solely because the tip diameter and thread family are similar.
3
Confirm the 3/8-24 mounting arrangement, available rear access, target material and probe-to-target clearances.
4
Agency option 00 does not specify multiple approvals; hazardous-area installation requires the correct approved configuration and drawing.
5
Do not treat 330195 as a probe-only substitute for 330192 or another ETR family without mechanical and system-level review.

Lifecycle And Replacement Guidance

The current Bently Nevada 3300 XL 8 mm datasheet lists the 330195 ETR reverse-mount family and states no discontinuation date or universal successor for this complete code.

Frequently Asked Questions

Which mounting style is used by 330195-02-12-50-00?

It is the 3/8-24 UNF Extended Temperature Range reverse-mount family.

Which total system length applies to 330195-02-12-50-00?

Option 50 is a 5.0 m probe, designed for the 5 m Proximitor sensor only.

Are multiple approvals included with 330195-02-12-50-00?

No. Option 00 specifies that agency approval is not required.

Can 330195-02-12-50-00 directly replace a 330192 forward-mount probe?

No direct substitution is confirmed. Reverse-mount geometry, case arrangement, access and the entire electrical system must be reviewed.

What should be included in an RFQ for 330195-02-12-50-00?

Include the complete code, quantity, nameplate, installed Proximitor model, mounting drawing, target material and hazardous-area requirement.

Model Identification

Use the complete identifier 330195-02-12-50-00. Hyphen placement, zero padding and every suffix field are significant; compare the full nameplate and purchase record before ordering.

Manufacturer References

Bently Nevada 3300 XL 8 mm Proximity Transducer System Datasheet, document 141194 Rev. AN; Approvals Quick Reference Guide, document 108M1756 Rev. AL.

Browse Bently Nevada products  |  Request a quote for this exact model

About PLC Leader

www.plcleader.com

PLC Leader supports maintenance planners and reliability engineers sourcing industrial automation and machinery-condition components. Each review begins with the exact nameplate code and installed-system context.

Requested condition, quantity, documentation, destination and model-specific verification needs are checked before a quotation is prepared.

Learn More About PLC LeaderSubmit an RFQ

PLC Leader team supporting 330195-02-12-50-00 industrial product sourcing

Recommended Models

These models are selected from reference lists supplied to PLC Leader and are shown for sourcing discovery only. They are not presented as direct replacements for the product described on this page. Confirm the complete manufacturer and part number before ordering.

500-636003 G5RL-1-E NB65-160/157 A-F-A-BAQE
Nord Drivesystems SK 180LP/4 TF SH ph-pan04.eu MTN677290
VSP‑005 IOC‑16 VM40000
Salzmann 28592 H/12, Behr 0691310002 901-T300-WW01 6SL3243-0BB30-1HA3 CU230P-2 HVAC
ABB CNV-W-3 KL3062 JD899A - HPE
17‑0168 Siemens 3WL1232-3EB36-4GN2-Z 3WL9212-5AC41-0BA1 700224-001 75W/8
METSECT5DA060 Siemens 3TF3001-0XL2 RWR462.10
M2000 AMAX-2241 6GK1503-2CB00
INF-1001 ESR901 CDH4U5-B
M5004F1100 FRK92/4-300S 50011213 ONX908PIT-V1-S1-F1
HDL-MSD04T.40 STI‑1130 MR 45-C2-1310-A-25-25-G1-V3
084B8020 342911 / 2 ABB UMC100 1SAJ53000R1100
Siemens 6SE7033-5HK60-Z PR502 Danfoss EKA164B 084B8575
F4PNMV2-HC DCP2-2405 1240020009A ABB 1KGT004900R5012
3-6/3S1GYR CRM-4 MT5600ZDXV
P8-HDMI2-4KDS/HDMI 600‑1054‑95R‑11 ABB TU706F A0,3BDH000390R0001
46940C-3 RR1A03AEB00 476M-624
EDS-P206A-4PoE-S-SC-T sca-213 A8320A4A22-HW01
Digidim 452 VP9805 54-64111 DAC-633E
FT410DB-SSTSA B-TL70-Q5 ABB SACE EMAX E2 S 1600,1SDA056009R1

Hot Tags: bently nevada 330195-02-12-50-00 3300 xl 8 mm etr reverse-mount probe, bently nevada 330195-02-12-50-00 3300 xl 8 mm etr reverse-mount probe manufacturers, suppliers, electrical distribution system, gearbox monitoring, generator output monitoring, laser measurement devices, motor controllers, proportional valve

Disclaimer:

PLCleader sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.

PLCleader is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.