Bently Nevada 330702-00-25-10-02-05 3300 XL 11 mm Probe

The Bently Nevada 330702-00-25-10-02-05 is a high-precision eddy current probe from the 3300 XL series, designed specifically for monitoring shaft vibration, shaft displacement, and key phase parameters in medium-to-large rotating equipment (such as centrifugal compressors, steam turbines, and large motors). It is a core sensing component optimized for long cabling distances and harsh operating conditions within the GE Bently Nevada brand.
This probe features a standard 11mm probe diameter and an extra-long 25m temperature-resistant cable, addressing the challenges of limited cabling distances in large equipment (such as multi-story units and equipment with long shafts). The probe also features an upgraded wear-resistant coating and anti-interference circuitry, ensuring stable operation over a wide temperature range of -54°C to +149°C, in environments with high dust and heavy oil pollution. Whether it's monitoring the shaft displacement of large centrifugal compressors in petrochemical plants, capturing the radial vibration of steam turbines in thermal power plants, or collecting the key phase speed of ball mills in mines, it can provide micron-level precision data for equipment health diagnosis with the advantages of "long-distance, attenuation-free transmission + wide-temperature stable operation." It is the key "sensing nerve" to ensure the safe and continuous operation of large rotating equipment.

★ Optimized for long-distance cabling
The 25m cable is designed specifically for large equipment. Compared to 5m/10m probes in the same series, this eliminates the need for splicing cables to meet long-distance requirements, reducing connector failure points (which can easily lead to signal interruption due to vibration and corrosion). After using this probe in a compressor system at a chemical park, the signal failure rate was reduced by 90%.
★ Higher Accuracy and Corrosion Resistance
With ±0.8% linearity and ±3% sensitivity deviation, measurement accuracy is 20% higher than the basic model in the same series. The 316L stainless steel housing offers superior acid and alkali corrosion resistance, extending its service life by more than three times in offshore platforms and chlor-alkali chemical equipment.
★ Zone 1 High-Hazard Environment Compatibility
ATEX Zone 1 and IECEx explosion-proof certifications allow for use in environments with persistent explosive gases (such as crude oil storage tank areas and gas compressor rooms). This covers more high-risk scenarios than probes that only support Zone 2, meeting stringent safety standards. Compatible with all preamplifiers in all scenarios. Compatible with all models of the 3300 XL series, including the 330180 (standard preamplifier) ​​and 330190 (high-temperature preamplifier), the sensor can be replaced without replacing the probe, reducing system upgrade costs. For example, when a thermal power plant replaced a high-temperature preamplifier, the probe was directly reused, saving 50% on spare parts costs.

Is Bently Nevada 330702-00-25-10-02-05 not the part you are wanting?
Check out the rest of our website to see what else we have to offer!

Hot Tags: 330702 00 25 10 02 05 ; Bently Nevada 330702-00-25-10-02-05 ; 330702-00-25-10-02-05 pdf ; 330702-00-25-10-02-05 datasheet ; 330702-00-25-10-02-05 manual ; 330702-00-25-10-02-05 sell ; 330702-00-25-10-02-05 new ; 330702-00-25-10-02-05 Bently Nevada .

For any inquiries about automation spare parts, quotes, our team is ready to assist you. Reach out through any of the following channels:

Manager: Vicky

📧 Email: sales7@apterpower.com  

📞 Call: +86 18030175807  

💬 WhatsApp: +86 18030175807  

📦 Order & Logistics Support: Contact us for shipping and bulk order assistance