Bently Nevada 16710-06 Armored Accelerometer Interconnect Cable

Bently Nevada 16710-06 — 16710 armored accelerometer interconnect cable.
✓ Original Product Verification✓ Ready Stock Check✓ Exact Model Review✓ 24-Hour Online Quotation
Send Inquiry
Description
BENTLY NEVADA PRODUCT INFORMATION

16710-06

Bently Nevada 16710-06 Armored Accelerometer Interconnect Cable

16710-06 is a 6 ft (approximately 1.8 m) three-conductor shielded 22 AWG armored interconnect cable with a three-socket plug at the accelerometer end and terminal lugs at the monitor end. Every value below is tied to this complete ordering code and is not copied from a similar suffix.

Confirmed Product Information

Manufacturer Bently Nevada, a Baker Hughes business
Cable family 16710 Standard armored interconnect cable for compatible Bently Nevada accelerometers
Length option 06 6 ft (approximately 1.8 m)
Conductors Three-conductor shielded 22 AWG (0.5 mm²) cable
Mechanical protection External cable armor
Sensor-end termination Three-socket plug
Monitor-end termination Terminal lugs
Published family length range 3 to 99 ft (0.9 to 30 m)
Compatible manufacturer families 330400 and 330425 accelerometer installations using the documented three-conductor interface

Applications

1
Signal connection between a compatible Bently Nevada accelerometer and monitoring equipment.
2
Industrial vibration-monitoring installations that require a shielded three-conductor cable with external armor.
3
Retrofit or maintenance work where the installed accelerometer accepts the documented three-socket connector.

Confirmed Compatibility And Installation Conditions

✓
Confirm the installed accelerometer family and connector before ordering; the 16710 cable is not a proximity-probe extension cable.
✓
Verify the required 6 ft routing length, bend radius, armor clearance and terminal-lug termination.
✓
Use shield termination and cable routing practices from the applicable accelerometer instruction manual to limit noise pickup.
✓
Do not substitute an unarmored 16925 or booted 130539 cable unless the environment and connector requirements have been requalified.
✓
The current reviewed manufacturer material gives no exact discontinuation date or universal replacement for 16710-06.

Lifecycle And Replacement Guidance

Manufacturer document 141638 defines the 16710 cable family and 6 ft standard length. It does not state an exact discontinuation date or a universal direct successor for 16710-06.

Frequently Asked Questions

How long is 16710-06?

The 06 suffix specifies 6 ft, approximately 1.8 m.

Which connectors are fitted to 16710-06?

A three-socket plug is provided at the accelerometer end and terminal lugs at the monitor end.

Is 16710-06 armored?

Yes. The 16710 family is the armored three-conductor 22 AWG interconnect cable.

Can 16925 replace 16710-06?

Not automatically. The 16925 is unarmored; confirm mechanical protection, connector, length and environmental requirements before substitution.

Which device should be confirmed before ordering 16710-06?

Confirm the installed compatible accelerometer, especially the 330400 or 330425 family, plus monitor termination and routing length.

Model Identification

Use the complete identifier 16710-06. Hyphen placement, zero padding and every suffix field are significant; compare the full nameplate and purchase record before ordering.

Manufacturer References

Bently Nevada 330400 and 330425 Accelerometer Acceleration Transducers Datasheet, document 141638; applicable 330400/330425 accelerometer instruction manual.

Browse Bently Nevada products  |  Request a quote for this exact model

About PLC Leader

www.plcleader.com

PLC Leader supplies sourcing support for current and hard-to-find PLC, DCS, drive, safety and condition-monitoring parts used across industrial plants.

Each RFQ is reviewed against the complete part number, required condition, quantity and technical-document needs before supply terms are confirmed.

Learn More About PLC LeaderSubmit an RFQ

PLC Leader team supporting 16710-06 industrial product sourcing

Recommended Models

These models are selected from reference lists supplied to PLC Leader and are shown for sourcing discovery only. They are not presented as direct replacements for the product described on this page. Confirm the complete manufacturer and part number before ordering.

CP-8832-MIC-WIRED BNC-2121/166906C-01 TM3DQ16RG
PDT 3100 /STBPDT3100 E244-16C-G-LS-D8-CR-SQ-BR D950EF-00
0781-3619 ELR DIN310 ABB PM554 DO561
NC5FX‑B R7651191/R7651191-03 UD1100001-01
E160X01 2967060 PLC-RSC-24DC/21-21 RPT-BL-DEMO
DAWE D-1422C PR030/B 51453540.001
MMX-400/MMX-1 300 BMXDDI3202K TM3XTYS4 TM3-TESYS 4XRJ45
APE-211 S904 SS-4BHT-72
pdrc816FR-knx IQ4/IO/8DO IQ4IO-5000U000080 VV2000C
RD43.1-4R-185-W-NN-FW ZB12-1.6 C4D0212N‑A
C-MAP M-IN-M201.07 WSU26/3-103A00 / 1047984 05-7063-JMD03S2-R0BK
SOLIDC-4/250 SSS B72G-2AK-AE1-RCN NORGREN B72G-2AK-AE1-RCG MeanWell DR‑15‑24
ABB S800 I/O TU830V1 3BSE013234R1 808613.1 MPEG-2 vid003.00ra1
Toshiba IBM 9634961 DES-12-G DES-12 G 3PK-6500T Duraplug CCP153
0J-0P4512AA JKH8262G080E LT410 LIQUI-TECT
ABB 1SAZ211201R1021 4811543 Honeywell XFC3A06001
ABB 2CDG110072R0011 ABB MU6301/60-811-500 2CKA006300A1397 OP921 S54320‑F4‑A2
J80-8SS42,H10-106QW VROM-160 D59B 74158 MTL5544D
ABB OVR BT2 3N-40-320-P 2TAM103100R4500 G22M4 sc 103
FCSM082300 MPA2 6ES7972-0BB12-0XA0

Hot Tags: Bently Nevada 16710-06, 16710 armored cable quote, 6 ft accelerometer cable, 330400 accelerometer interconnect, 330425 armored sensor cable, Bently Nevada 16710 replacement review

Hot Tags: bently nevada 16710-06 armored accelerometer interconnect cable, bently nevada 16710-06 armored accelerometer interconnect cable manufacturers, suppliers, balancing equipment, can bus in machinery monitoring, data driven maintenance, humidity sensor, motor current analysis, temperature profile monitoring

Disclaimer:

PLCleader sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.

PLCleader is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.