Bently Nevada 31000-28-05-00-066-03-02 Proximity Probe Housing Assembly

Bently Nevada 31000-28-05-00-066-03-02 — 31000 English proximity probe housing assembly.
✓ Original Product Verification✓ Ready Stock Check✓ Exact Model Review✓ 24-Hour Online Quotation
Send Inquiry
Description
BENTLY NEVADA PRODUCT INFORMATION

31000-28-05-00-066-03-02

Bently Nevada 31000-28-05-00-066-03-02 Proximity Probe Housing Assembly

31000-28-05-00-066-03-02 is a PPS protective housing with a 3300 XL 8 mm multiple-approvals probe, 0.5 m cable, no standoff adapter, 6.6 in (approximately 168 mm) penetration, option-03 fittings and mounting option 02. Every value below is tied to this complete ordering code and is not copied from a similar suffix.

Confirmed Product Information

Manufacturer Bently Nevada, a Baker Hughes business
Housing family 31000 English proximity probe housing assembly
Housing material Glass-reinforced polyphenylene sulfide (PPS) with corrosion-resistant stainless-steel hardware
Probe option 28 3300 XL 8 mm probe with selectable hazardous-area approvals
Probe cable option 05 0.5 m (20 in)
Standoff option 00 No standoff adapter
Probe penetration option 066 6.6 in (approximately 168 mm)
Fittings option 03 Two plugs, one 3/4-14 NPT fitting, one 3/4-14 to 1/2-14 NPT stainless-steel reducer, and one cable-seal grip with three grommet ranges
Mounting option 02 3/4-14 NPT outer sleeve and retaining hardware
Environmental enclosure NEMA Type 4X and IP66
Typical assembly weight Approximately 1.2 kg (2.6 lb)

Applications

✓
Protected proximity-probe installation for radial vibration and shaft-position measurement.
✓
External probe-gap adjustment and maintenance access on rotating machinery.
✓
Installations requiring the documented PPS housing and Type 4X / IP66 environmental protection.

Confirmed Compatibility And Installation Conditions

With no standoff and 6.6 in (approximately 168 mm) penetration, the combined dimension is 6.6 in, below the greater-than-12-in support threshold.
Confirm machine-case clearance, target geometry and probe side-view or rear-view effects against the installation drawing.
Mounting option 02 uses the documented 3/4-14 NPT sleeve arrangement.
This housing is not the manufacturer's explosion-proof CA housing; use the appropriate CA family where explosion-proof protection is mandatory.
Confirm the delivered probe approval marking, cable-seal grommet range and intrinsic-safety drawing for the destination.

Lifecycle And Replacement Guidance

The current manufacturer datasheet lists the 31000 family and gives no exact discontinuation date or universal direct successor for 31000-28-05-00-066-03-02.

Frequently Asked Questions

What mounting hardware is included with 31000-28-05-00-066-03-02?

3/4-14 NPT outer sleeve and retaining hardware.

Does 31000-28-05-00-066-03-02 require added sleeve support?

No, not by the manufacturer's length rule. The combined standoff and penetration dimension is 6.6 in, and support is required only above 12 in.

Which probe and cable are specified for 31000-28-05-00-066-03-02?

Option 28 specifies the 3300 XL 8 mm multiple-approvals probe and option 05 specifies a 0.5 m cable.

Can 31000-28-05-00-066-03-02 be used as an explosion-proof housing?

No. The standard 31000 PPS housing is not the separate CA explosion-proof housing family.

Is a direct substitute confirmed for 31000-28-05-00-066-03-02?

No universal substitute is stated. Confirm the complete model, mounting hardware, penetration, fittings, approvals and machine drawing.

Model Identification

Use the complete identifier 31000-28-05-00-066-03-02. Hyphen placement, zero padding and every suffix field are significant; compare the full nameplate and purchase record before ordering.

Manufacturer References

Bently Nevada 31000 and 32000 Proximity Probe Housing Assemblies Datasheet, document 141610; 3300 XL 8 mm Proximity Transducer System Datasheet, document 141194.

Browse Bently Nevada products  |  Request a quote for this exact model

About PLC Leader

www.plcleader.com

PLC Leader works with system integrators, distributors and industrial end users who need traceable automation and machinery-protection spare parts.

We review exact model identity, quantity, destination and technical verification needs so the quotation reflects the requested configuration rather than a similar suffix.

Learn More About PLC LeaderSubmit an RFQ

PLC Leader team supporting 31000-28-05-00-066-03-02 industrial product sourcing

Recommended Models

These models are selected from reference lists supplied to PLC Leader and are shown for sourcing discovery only. They are not presented as direct replacements for the product described on this page. Confirm the complete manufacturer and part number before ordering.

4574821 QBM81-3 LIP-ME201 100Base-T
DL-K 16-130/T-EN54 TPNN0077 B9YH5/3
YMCKT-KT 552854-506 RailZ-4M,01D02H010 AXM217F202
HVE4X MTL4541AS XSL513
KL4032 IDR820 JZ10-11-PT15
RTCL009NAA Ve 2424 D/C 5NCLPT-2E
49Y7935 40GbE ABB RXMVB 2 RK 251204-AN 1700-1116-01
SRE06B-C4 BS6151 01SP01 DBA-EA43/A10RH
IZM-SEC-TB15 Omron H3DE-S1 XJBO3-5928-1
787-885 MB-6279 GLC65-28
C75 PS00E03knx 6EP1353-2BA00
F01U033343 LBB4442 LRD3353 BO08B01KNX
PN:0918-506-6803 ABB STD-420 7746FSE-HD
26.F4.C0U-4S00 CP17970 RTU-EN01
779153-001 DL360 BZMC2-A250 1794‑OB16
LC1 F115 TMC4AI2 9121050000
SFC200240 IR791GS55 PWV/120AC,5A/4-20MAB/3E-120AC-CE-SPC
101-VF/230 0-073-0507-0 860-100-170 Siemens 3AE1086-7
SL10.100 PUB4024S 035 62 SCS
D1092S-069 140471-01 3500/70 1478130000

Hot Tags: bently nevada 31000-28-05-00-066-03-02 proximity probe housing assembly, bently nevada 31000-28-05-00-066-03-02 proximity probe housing assembly manufacturers, suppliers

Disclaimer:

PLCleader sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.

PLCleader is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.