Product Brief
- Product No. : 330130-040-03-05
- Product Type : 3300 XL Standard Extension Cable
- Cable Length: 040 means 4.0 meters (11.5 feet)
- Connector and Cable-Type: 03 means Armored cable with connector protector
- Agency Approval Option : 05 means Multiple Approvals
Products Feature
| Frequency Response | (0 to 10 kHz), +0, -3 dB, with up to 305 meters (1000 feet) of field wiring. |
| Recommended Gap Setting for Radial Vibration | -9 Vdc [approximately 1.27 mm (50 mils)] |
| Extension Cable Capacitance | 69.9 pF/m (21.3 pF/ft) typical |
| Power | Requires -17.5 Vdc to -26 Vdc when installed with nonincendive circuit connected per installation drawing 140979 at 12 mA maximum consumption, -23 Vdc to -26 Vdc with barriers. Operation at a more positive voltage than -23.5 Vdc can result in reduced linear range. |
- The 3300 XL probe and extension cable also reflect improvements over previous designs. A patented TipLoc molding method provides a more robust bond between the probe tip and the probe body. The probe's cable incorporates a patented CableLoc design that provides 330 N (75 lbf) pull strength to more securely attach the probe cable and probe tip.
- You can also order 3300 XL 8 mm probes and extension cables with an optional FluidLoc cable option. This option prevents oil and other liquids from leaking out of the machine through the cable's interior.
- Each 3300 XL extension cable includes silicone tape that you can use instead of connector protectors. We do not recommend silicone tape for applications that will expose the probe-to-extension cable connection to turbine oil.
- Unless otherwise noted, the above specifications are for a 3300 XL 8 mm Proximitor Sensor, extension cable and 8 mm probe between +18˚C and +27˚C (+64˚F to +80˚F) at a maximum altitude of 2000 meters, with a -24 Vdc power supply, a 10 kΩ load, an AISI 4140 steel target, and a probe gapped at 1.27 mm (50 mils). Performance characteristics apply to systems that consist solely of 3300 XL 8 mm components. The system accuracy and interchangeability specifications do not apply to transducer systems that are calibrated to any target other than our AISI 4140 steel target.
Keywords: Bently Nevada 330130-040-03-05; 330130-040-03-CN Cable; 330130 040 03 05;330130-040-03-00 pdf
Tips About Installation
- Installation steps
(1) Determine the installation position: Determine the best installation position of the probe according to the structure of the equipment and the location of the measurement point.
(2) Fix the base: Fix the base of the probe firmly on the equipment. Bolts, screws or other suitable fixing methods can be used.
(3) Connect the cable: Connect the cable of the probe to the signal acquisition system of the equipment. Pay attention to the connection method and direction of the cable.
(4) Adjust the probe position: Adjust the position of the probe to keep it at an appropriate distance from the measured surface.
(5) Calibrate the probe: Calibrate the probe according to the specific requirements of the equipment. The calibration method and parameters can be found in the product manual.
- Installation precautions
(1)Avoid contact with moving parts: The probe should be installed away from moving parts to avoid damage to the probe.
(2) Pay attention to cable protection: The cable should be properly fixed to avoid being squeezed or worn.
(3) Avoid environmental interference: The probe should be installed away from strong magnetic fields, high-frequency electromagnetic interference and other environments.
(4) Regular inspection: Regularly check the installation of the probe to ensure that it is firmly fixed and the connection is reliable.
If 330130-040-03-05 is not the one you need, Click here!
More Bently Nevada Models
| 135137-01 | 3500/65 145988-02 | 330104-00-12-10-02-00 | 330130-030-01-CN |
| 136188-02 | 3500/72M 176449-08 | 330104-00-13-10-02-00 | 330130-035-00-00 |
| 140471-01 | 3500/94 145988-01 | 330104-00-15-10-02-00 | 330130-035-00-CN |
| 140482-01 | 102044-00-18-10-02 | 330104-00-16-10-02-00 | 330130-035-01-CN |
| 147663-01 | 102244-22-50-01 | 330104-00-18-10-02-00 | 330130-040-00-00 |
| 149992-01 | 102618-01 | 330104-00-22-10-02-00 | 330130-040-00-05 |
| 149992-02 | 125388-01 | 330104-00-22-10-02-05 | 330130-040-00-CN |
| 170133-090-00 | 125388-01 125388-01H | 330104-00-24-10-02-00 | 330130-040-01-00 |
| 172103-01 | 125388-01H | 330104-00-25-10-02-05 | 330173-00-18-10-02-05 |
| 1900/65A 172323-01 | 125704-01 | 330104-01-05-10-02-00 | 330130-045-00-00 |
| 330180-X0-05 | 125720-01 | 330104-01-06-10-02-00 | 330130-045-00-CN |
| 330500-00-20 | 125720-02 | 330104-03-06-05-02-00 | 330130-045-01-00 |
| 330500-02-00 | 125736-01 | 330104-03-06-10-02-00 | 330130-045-01-CN |
| 3500/22M 288055-01 | 125760-01 | 330104-05-13-10-02-00 | 330130-045-02-00 |
| 3500/32M 149986-02 | 125768-01 | 330104-05-15-05-02-00 | 330130-045-02-05 |
| 3500/33 149986-01 | 125800-01 | 330130-080-00-CN | 330130-045-03-05 |
| 3500/40M 140734-01 | 330130-070-00-CN | 330130-085-00-00 | 330171-00-08-10-02-00 |
| 3500/40M 176449-01 | 330130-075-00-00 | 330130-085-00-05 | 330171-08-24-10-02-00 |
| 3500/60 163179-01 | 330130-075-00-CN | 330130-085-00-CN | 330173-00-05-10-12-00 |
| 3500/62 163179-03 | 330130-080-00-00 | 330130-085-01-00 | 330173-00-06-10-02-00 |
Quotation
Vicky
Whatsapp: +8618030175807
Skype: live:2435aba439730baa
Email: sales7@apterpower.com
Hot Tags: bently nevada 330130-040-03-05 extension cable, bently nevada 330130-040-03-05 extension cable manufacturers, suppliers, actuator monitoring, pressure sensor, flatness measurement device, electrical distribution system, industrial network switches for monitoring, bearing monitoring
