General Electric IS420UCSBS1A Controller Module

General Electric IS420UCSBS1A Controller Module

The IS420UCSBS1A controller was designed by General Electric as part of the Mark VIeS Control Safety System. This controller is labeled as a Mark VIeS Safety Controller and has specific locations where it can be mounted; the standard mounting location for this controller is panel sheet mounting. This controller can be mounted in class one, zone two, group IIC with a UL E207685 certification; this is not the only location for this controller, and all other locations and certifications can be found in the GEH-6725 Mark VIe and Mark VIeS Controls Equipment HazLoc manual on page 112.

The IS420UCSBS1A controller is similar to the UCSC controller and has some of the same features and functions; some features that are available on the UCSB controller are no required jumper settings, flash memory that can be updated at the user's convenience, and no fan. This controller has the ability to communicate with I/O modules through onboard input-output networks. Before configuring the IS420UCSBS1A controller ensure that the controller has been properly added to the system with the correct redundancy, that the control system network cabling and hardware have been connected properly, and that all of the equipment in the system has been powered on successfully. While this controller is similar to the UCSC controller it is also identical to the IS420UCSBS1ABB controller in fit, form, and function. Before making any singular purchasing choice on this IS420UCSBS1A Safety Controller Board product offering, however, it is critical to realize that its base-revised performance specifications and dimensions have almost certainly been altered through its considered adoption of a full three-fold product revision table including two functional product revisions and an artwork configuration revision.

• It is used for functional safety loops to achieve SIL 2 and 3 capabilities. This module is a GE controller that was built for the Mark VIe and Mark VIeS systems.
• The IS420UCSBS1A is a safety controller module for Mark VIeS. It is certified for use in hazardous environments, albeit such use may necessitate particular and unusual installation requirements.
• The module is powered by an Intel EP80579 600 MHz CPU.
• The power source for this controller has a nominal voltage of 28.0 VDC (Min 27.4 VDC, Max 28.6 VDC.) It can withstand temperatures ranging from -30 to +65 degrees Celsius in its environment.
• For functional safety loops, the module is commonly utilized. These are designed to meet SIL2 and SIL3 requirements. Controllers such as the IS420UCSBS1A are built with control hardware and software that satisfies IEC 61508 certification and use safety-oriented programming.
• The QNX Neutrino operating system is a real-time multi-tasking OS for this UCSB controller. The IS420UCSBS1A is a self-contained computer module. Unlike standard controllers, it does not have a backplane. The unit is self-contained and has its own power supply. There is no battery and no jumper settings are required.

Related words：is420ucsbs1a;General Electric IS420UCSBS1A;IS420UCSBS1A pdf;datasheet IS420UCSBS1A;IS420UCSBS1A manual

Is GE Fanuc IS420UCSBS1A not the part you are wanting?

Check out the rest of our website to see what else we have to offer!