745-W3-P511-G51-HI-R-E Three-Winding Protection Relay
The GE Multilin 745-W3-P511-G51-HI-R-E is a three-winding transformer protection relay with mixed phase and ground current-transformer input ratings. P511 assigns a 5 A phase input to winding 1 and 1 A inputs to windings 2 and 3.
Its G51 configuration provides two ground-current input groups: 5 A for G1/2 and 1 A for G2/3. The relay includes the restricted ground fault protection option and an enhanced front-panel display.
The principal replacement issue is the allocation of 5 A and 1 A CT secondary circuits. A different 745 three-winding relay may have the same case design but incompatible current input ratings.
745 Draw-Out Construction and Relay Identification
Multilin 745 relay housing and front-panel construction.
Hardware Identity Matters
The 745 uses a draw-out construction for maintenance and relay replacement. The installed relay case, rear connections and current input arrangement must be compatible with the replacement.
The selected E option provides an enhanced LCD and keypad. It does not identify the optional 10Base-T Ethernet interface, which belongs to the T display option.
Record the complete nameplate order code, hardware revision and firmware version before replacing an installed unit.
The order code ends in R-E and does not include the H harsh-environment coating option. Visual similarity alone cannot establish that two 745 relays have matching electrical options.
Five Current Input Ratings Across Three Windings
This relay has three sets of phase-current inputs and two ground-current input groups. The P511 and G51 order codes identify their electrical secondary-current ratings.
Functional input grouping. Ground input allocation and physical terminal connections follow the approved relay application and wiring drawings.
| Input Circuit | Rated Secondary | Required Verification |
|---|---|---|
| Winding 1 Phase CT | 5 A | Match winding 1 CT rating, ratio, polarity and terminals. |
| Winding 2 Phase CT | 1 A | Match the winding 2 1 A secondary circuit. |
| Winding 3 Phase CT | 1 A | Match the winding 3 1 A secondary circuit. |
| Ground Input G1/2 | 5 A | Confirm the applicable ground CT source and configured assignment. |
| Ground Input G2/3 | 1 A | Confirm the applicable ground CT source and configured assignment. |
CT input mismatch: The 5 A and 1 A inputs are not interchangeable by default. Incorrect CT connections can result in inaccurate measurement or protection operation. Qualified personnel must verify the secondary circuits against the approved drawings before energizing the relay.
P511 Compared with P515 and P551
The 745 ordering system offers several mixed-current configurations for three-winding transformers. The P-code sequence identifies the phase input rating for each winding in order.
Winding 1 uses 5 A. Windings 2 and 3 use 1 A.
Winding 3 changes from 1 A to 5 A.
Winding 2 changes from 1 A to 5 A.
A relay ordered with P515 or P551 should not replace P511 without an approved review of the CT secondary circuits and relay hardware.
The P code specifies phase current ratings only. The ground-current ratings are selected separately through the G code.
Restricted Ground Fault Protection with G51
The R option adds restricted ground fault protection. This function is used to detect faults within a defined transformer winding protection zone.
G1/2 and G2/3
The G51 code assigns a 5 A rating to G1/2 and a 1 A rating to G2/3.
These are two ground-current input groups, not three independent ground inputs for the three windings.
Restricted Ground Fault
The RGF application depends on the transformer grounding, neutral connections, CT arrangement and relay settings.
A selected R option does not by itself establish the external wiring or an approved protection zone.
In a three-winding installation, the two ground input groups must be assigned in accordance with the transformer configuration and the relay's applicable operating instructions.
Ground input allocation must not be inferred from physical drawing position or the winding numbering alone. Refer to the site protection design for CT polarity, grounding and function settings.
HI Power, Enhanced Display and Non-H Configuration
The HI supply option accepts 90–300 V DC or 70–265 V AC at 48–62 Hz. Its input voltage must match the station control supply.
| Selected Code | Configuration | What to Check |
|---|---|---|
| HI | High-range AC/DC control-power supply | Station voltage and available control power |
| R | Restricted ground fault protection | Required protection functions and approved settings |
| E | Enhanced LCD and keypad | Front display and communication interface |
This order code does not select A for additional analog I/O, L for the loss-of-life enhancement, T for the enhanced display with 10Base-T Ethernet, or H for harsh-environment conformal coating.
E versus T: The E display option does not specify an Ethernet port. Existing communication cabling and protocol requirements should be checked against the actual installed ports.
For installations requiring the H coating option, compare the full order code with the H-suffixed variant. The coating option does not change the P511 or G51 current ratings.
Exact Replacement and Legacy 745 Maintenance
GE Vernova has discontinued manufacturing the 745. Existing installations may require replacement 745 hardware or an engineered migration to the 845.
GE Vernova offers a 745-to-845 retrofit path. However, a retrofit must account for the actual three-winding scheme, mixed CT inputs, protection settings and installed wiring.
Checks Before Ordering a Replacement
The GE Vernova legacy transformer protection catalog identifies the 745 lifecycle status and the 845 replacement direction.
The GE Multilin 745 technical brochure contains the original ordering code definitions.
745-W3-P511-G51-HI-R-E Frequently Asked Questions
P511 specifies a 5 A phase-current input for winding 1 and 1 A inputs for windings 2 and 3. This lets the relay match a protection arrangement using different CT secondary-current ratings. The actual CT ratios and relay settings must also be correct.
Not as an assumed direct replacement. P515 has 5 A / 1 A / 5 A phase inputs, while P551 has 5 A / 5 A / 1 A. These differ from the P511 arrangement. The connected CT circuits and relay hardware must be reviewed before substitution.
G51 specifies the electrical ratings: G1/2 is 5 A and G2/3 is 1 A. The effective winding assignment depends on the selected three-winding scheme and approved relay configuration. It should not be inferred from the order code alone.
Restricted ground fault protection depends on the grounding method, neutral arrangement, CT positions and defined protection zone. The R option enables the function, but the site wiring and approved settings determine its actual application.
The connection would not match the selected input rating and could compromise measurement or protection behavior. CT secondary wiring must follow the approved protection drawings. Any proposed change requires review by qualified protection personnel.
H adds the harsh-environment conformal-coating option. With the remaining order code unchanged, the specified phase and ground current ratings are the same. The offered hardware, revision and installation requirements should still be checked.
Record the complete order code, hardware revision, firmware, CT input connections, approved protection settings and trip logic. Case and rear-terminal compatibility must also be confirmed. The replacement requires the site's specified protection testing and acceptance checks.
Related GE Multilin Relay Configurations
Relays within the same 745 series can differ in phase-current ratings, ground-current ratings, enhancement options and environmental protection.
Request 745-W3-P511-G51-HI-R-E Availability
Send your requirement for GE Multilin 745-W3-P511-G51-HI-R-E, including the required quantity, preferred condition and destination country.
For an existing protection installation, include the relay nameplate, hardware revision and firmware information where available. We will confirm the offered unit's condition, availability and quotation terms.
Request a 745 Three-Winding Relay QuoteHot Tags: 745-W3-P511-G51-HI-R-E, GE Multilin 745, three winding transformer relay, P511 CT inputs, G51 ground inputs, GE 745 restricted ground fault, Multilin 745 replacement, audio equipment, electrical appliances, fiber optic products, market research services, blockchain technology, photos






