Red Lion IFMA0035 DIN Rail Frequency Analog Converter

The Model IFMA accepts a frequency input, and outputs an analog voltage or current in proportion to the input frequency, with 0.1% accuracy. The full scale input frequency can be set to any value from 1 Hz to 25 KHz, either with a frequency source, or digitally with the on-board rotary switch and push-button. The IFMA utilizes a seven position DIP switch, a rotary switch, a push-button and two indication LEDs to accomplish input circuit configuration, operational parameter set-up, and Input/Output indication. The input circuitry is DIP switch selectable for a variety of sources. The indication LEDs are used during normal operation to display the input and output status of the IFMA. These LEDs are also used to provide visual feedback to the user of the existing parameter settings during parameter set-up. The IFMA operates in one of four output modes. The programmable minimum and maximum response times provide optimal response at any input frequency. The unit is equipped with a universal mounting foot for attachment to standard DIN style mounting rails, including top hat profile rail according to EN 50 022 - 35 x7.5 and 35 x 15, and G profile rail according to EN 50 035 - G 32.

Manufacturer: Red Lion
Part Number: IFMA0035
Part Type: DIN Rail Frequency Analog Converter
Place of origin: USA
1. POWER:

• AC Operation: 85 to 250 VAC, 48 to 62 Hz; 6.5 VA
• DC Operation: 9 to 32 VDC; 2.5 W
  
• Power Up Current: Ip = 600 mA for 50 msec. max.

2. SENSOR POWER: (AC version only) +12 VDC ±25% @ 60 mA max.
3. OPERATING FREQUENCY RANGE:From 0 Hz to 25 KHz; user selectable.
4. SIGNAL VOLTAGE OUTPUT (Selectable):

• 0 to 5 VDC @ 10 mA max.
• 0 to 10 VDC @ 10 mA max.

5. SIGNAL CURRENT OUTPUT (Selectable):

• 0 to 20 mA @ 10 VDC min.
• 4 to 20 mA@ 10 VDC min.

To begin setup, place DIP switch 4 in the on (up) position. DIP switches 5, 6, and 7 access the unit configuration settings. After entering the setup parameters, the input LED flashes the current value of the setting at a rate of 1 Hz. A setting of "1" is indicated by a single flash (half-second on, half-second off), and a setting of "9" is indicated by nine flashes. A setting of "0" is indicated by a single short flash (40 milliseconds on, 1 second off). The decimal point position is the last digit that flashes. After displaying the complete value, the IFMA pauses for two seconds and then repeats the value. If the mode switch (S4) or any CFG DIP switch position is changed during entry of a new value before pressing the button, the IFMA aborts the entry process and retains the previous setting.

Is Red Lion IFMA0035 not the part you are wanting?
Check out the rest of our website to see what else we have to offer!

Hot Tags: ifma0035;Red Lion IFMA0035; IFMA0035 pdf; IFMA0035 datasheet; IFMA0035 manual; IFMA0035 sell; IFMA0035 new; IFMA0035 Red Lion

📧 Email: sales7@apterpower.com
📱 Call or WhatsApp: +861803017580
🔧 PLC Leader - Your Trusted Automation Parts Trader

PLC Leader offers a wide range of automation parts globally. For immediate inquiries and fast shipping, Vicky is here to help you.