Product Overview
The Allen-Bradley 1771-ASB/E is a PLC 5 Universal Remote I/O Adapter Module. It interfaces with I/O modules in a 1771 I/O chassis with a Remote I/O scanner port for a processor over an I/O link. Using it instead of direct wiring reduces startup, installation, and maintenance costs by the I/O being closer to the actuators and sensors. It is compatible with 32 I/O-adapter devices via the I/O link and it uses 82 Ohm or 150 Ohm terminating resistor.
Email: sales7@apterpower.com
Call or Whatsapp: +8618030175807
Technical Specifications
| Manufacturer | Rockwell Automation |
| Brand | Allen-Bradley |
| Part Number/Catalog No. | 1771-ASB/E |
| Module Type | I/O Adapter Module |
| Product Family: | SLC 500 |
| Port | Universal Remote I/O Adapter |
| Product Type: | RIO Adapter Module |
| Rate of Communication | 57.6 kbit/second, 115 kbit/second, 230 kbit/second |
| Connectors | Wiring Arm 1771-WB |
| Backplane Current (at 5 Volts) | 1.0 Amps |
| Communication Port: | Remote I/O (RIO) |
| Operating Temperature | 32°F to 140°F (0°C to 60°C) |
| Cable | Belden 9463 |
| Mounting: | In-Chassis |
| Storage Temperature | -40°F to +185°F (-40°C to +85°C) |
Description
The 1771-ASB/E module has a communication rate of 57.6 Kbps, 115 Kbps, and 230 Kbps and it weighs 1.9 pounds. It has a backplane current load of 1 A at 5 Volts DC and a maximum power dissipation of 5.2W. It requires a remote I/O adapter port for connection. For installation, it must be mounted in the left-most slot of the 1771 chassis with the I/O modules controlled by a PLC 5 processor. For wiring, the 1770-CD Belden 9463 or equivalent cable must be used. The 1771-ASB module has Active, Adapter Fault, and I/O Rack fault diagnostic Indicators, 2 switch assemblies, and a field wiring arm. It provides faster data transmission and backplane scanning up to 2500 feet at 230.4K Baud. It supports serial communication and reads/writes data in parallel form. It supports 4, 8, 12, 16, or 32-slot I/O chassis and 1 and 2-slot I/O addressing. The 1771-ASB improves scan time and I/O image space savings by scanning all slots except the last 4. It eases troubleshooting with its enhanced diagnostics features.
The 1771-ASB is an Allen-Bradley hardware that belongs to the PLC 5 product family of Programmable Logic Controllers (PLC). This electronic hardware is a remote I/O adapter that is used to interface the to Remote I/O (RIO) network. In actual, this RIO adapter responds to the request of the Remote I/O (RIO) scanner in the network. This adapter supports transmission of data at cable length and speeds of 10,000 feet at 57.6K baud, faster backplane scanning and data transmission up 2500 feet at 230.4K baud.
RIO Communication is physically implemented following daisy-chain topology. In this topology, the start and end points must be installed with a terminating resistor to close the network segment. The same is true for this protocol, either an 82 Ohm or 150 Ohm resistor may be used to terminate the segment. 150 Ohm is used for older configuration while 82 Ohms is used in enhanced RIO network versions. Belden 9463 or more popularly known as Belden Blue Hose cable is used for Remote I/O protocol.
Features
- Communication Rates from 57.6 Kb/s to 230 Kb/s
- Transmits Data Up to 10,000 Cable-Feet (at 57.6K Baud)
- Provides Faster Backplane Scanning and Data Transmission up 2500 Cable-Feet at 230.4K Baud
- Receives / Sends Data from / to the I/O Scanner in Serial Form
- Reads / Writes Data from / to the Input Modules in Parallel Form
- Reads / Writes Data from / to the Output Modules in Parallel Form
- Supports Any Mix of I/O (4, 6, 8, 16 or 32 Points)
- Supports Three Methods of I/O Addressing; 1/2-slot, 1-slot and 2-slot
The Rockwell/1771-ASB/E Remote I/O Adapter Module serves as an interface between remote I/O modules and programmable controllers.
The 1771-ASB/E features include:
- transmits data up to 10,000 cable-feet
- provides faster backplane scanning and data transmission up 2500 cable-feet at 230.4K baud
- receives/sends data from/to the I/O scanner in serial form
- supports any mix of I/O (4, 6, 8, 16 or 32 points)
- supports three methods of I/O addressing; 1/2-slot, 1-slot, and 2-slot
- checks I/O configuration on power-up to verify I/O module placement
- scans all slots in the chassis, or all but the last four slots, allowing improved scan time and I/O image space savings
- can emulate series B adapters
- has enhanced diagnostic indicators for easier troubleshooting
Related words：1771 asb series b;1771 asb module;1771asb;allen bradley 1771 asb;1771 asb;1771-ASB datasheet;1771-ASB manual
We reserve and supply a complete range of industrial automation and control equipment, including the following featured product categories:
- PLC system, servo driver, HMI and display
- CNC system, robotics, general automation
- Motor and encoder, safety automation
- DC drive, drive, variable frequency drive
- Process control, soft start
Is Allen Bradley 1771-ASB/E not the part you are wanting?
Check out the rest of our website to see what else we have to offer!
If you have any questions, please feel free to contact Vicky
( Email: sales7@apterpower.com// Call or Whatsapp: +8618030175807).
We will reply you to your email as soon as possible.
