Parameters
- Part Number: 109548-01 P1407030-00100
- Series: 3300XL NSv Series
- Measuring range: 0 to 2 mm (80 mils)
- Linear range: 0.25 mm to 1.5 mm (10 to 60 mils), ensuring high-precision measurement.
- Sensitivity: 7.87 mV/mil (3.937 mV/μm) per volt
- Operating temperature: -35°C to +177°C for probe body, -51°C to +177°C for probe cable
- Frequency response: 0 to 10 kHz
- DC voltage: -22 V to -26 V
- Probe length: 3 meters (about 9.8 feet)
- Probe diameter: 5 mm
- Cable jacket material: Polytetrafluoroethylene (PTFE) for high chemical and abrasion resistance.
- Compatibility: Compatible with Bently Nevada's 3300 NSv series drivers for eddy current measurements.
Installation method
Bently Nevada 109548-01 P1407030-00100 3300XL NSv Proximity Probe adopts a simple installation design to ensure its efficient application in various industrial environments. The specific installation steps are as follows:
(1)Determine the installation location: The probe should be installed at the location where the equipment vibrates most significantly, usually near the bearing or rotating parts of the equipment.
(2)Mounting bracket or mounting hole: Use a dedicated bracket or reserved threaded hole to install the probe. The diameter of the probe is 5 mm, so the diameter of the mounting hole should match it to ensure that the probe is stable.
(3)Adjust the distance between the probe and the target: The measuring distance range of the probe is 0.25 mm to 1.5 mm. When installing, ensure that the distance between the probe and the target is within this range, avoiding being too far or too close.
(4)Cable connection: The probe cable is connected to the monitoring system through a connector to ensure stable signal transmission. Pay attention to maintaining the integrity of the cable and avoid bending or damage.
(5)Testing and adjustment: After installation, testing and adjustment should be performed to ensure that the probe can accurately measure vibration and displacement data.
(keywords:109548-01 P1407030-00100; 109548-01 P1407030-00100;pdf 109548-01 P1407030-00100 datasheet)
Application Scope
Bently Nevada 109548-01 P1407030-00100 3300XL NSv Proximity Probe is mainly used for non-contact vibration and displacement monitoring of rotating machinery and equipment, especially for the condition monitoring of key components such as bearings, shafts, turbines and compressors.
Its application scenarios include but are not limited to:
(1)Power station equipment: shaft vibration monitoring of turbines and generators.
(2)Oil and gas equipment: vibration monitoring of compressors and pumps.
(3)Aerospace and defense equipment: condition monitoring of high-speed rotating machinery.
(4)Metallurgy and manufacturing industry: dynamic condition detection of equipment.
Due to its high sensitivity and accurate non-contact measurement capabilities, this probe is very suitable for online monitoring of high-speed rotating machinery and equipment, which can detect vibration changes of equipment in real time and help prevent failures.
More Models
| 3300/16 | 146031-01 | 330101-00-63-10-02-00 | 330103-00-04-05-02-00 |
| 3300/20 | 146031-02 | 330101-02-78-05-02-00 | 330103-00-04-05-02-CN |
| 3300/30 | 16710-30 | 330101-10-27-05-02-05 | 330103-00-04-10-02-00 |
| 3300/35 | 330101-00-08-20-02-05 | 330101-20-36-10-02-00 | 330103-00-04-15-02-CN |
| 3300/46 3300/46-46-04-02-01 | 330101-00-15-10-02-00 | 330101-23-38-10-02-00 | 330103-00-04-50-11-00 |
| 3300/47 | 330101-00-16-10-02-00 | 330101-24-35-10-02-00 | 330103-00-05-05-02-00 |
| 3300/50 | 330101-00-18-10-02-05 | 330101-30-63-10-02-00 | 330103-00-05-05-02-CN |
| 3300/50-02-01-00-00 | 330101-00-28-05-02-00 | 330101-30-63-10-02-CN | 330103-00-05-10-02-00 |
| 3300XL 8MM | 330101-00-40-10-02-00 | 330101-30-63-15-02-CN | 330103-00-05-10-02-05 |
| 330100-50-00 | 330101-00-50-10-02-00 | 330101-XX-XX-10-02-05 | 330103-00-05-10-02-CN |
| 330100-50-02 | 330101-00-56-10-02-00 | 330101-XX-XX-10-02-CN | 330103-00-05-15-02-CN |
| 330100-50-05 | 330101-00-60-10-02-00 | 330102-00-40-10-02-00 | 330101-00-08-05-02-00 |
| 172103-01 | 3500/94 145988-01 | 330102-22-58-10-02-00 | 330101-00-08-05-02-05 |
| 1900/65A 172323-01 | 102044-00-18-10-02 | 330103-00-03-05-02-00 | 330101-00-08-10-02-00 |
Is Bently Nevada 109548-01 P1407030-00100 not the part you are wanting?
Check out the rest of our website to see what else we have to offer!
Need Help?
Vicky
E-mail : sales7@apterpower.com
Mobile/Whatsapp : +8618030175807
Skype : live:2435aba439730baa
Hot Tags: bently nevada 109548-01 p1407030-00100 3300xl nsv proximity probe, bently nevada 109548-01 p1407030-00100 3300xl nsv proximity probe manufacturers, suppliers, industrial analytics software, power quality analyzer, industrial cybersecurity for monitoring, fluorescent lights, energy efficiency monitoring, industrial lighting
