Brief Introduction
- Part Number: 330101-33-60-10-02-00
- Unthreaded Length: 3 3 is 3.3 in
- Overall Case Length: 6 0 is 6.0 in
- Total Length: 10 is 1.0 meter (3.3 feet)
- Connector and Cable-Type: 02 is Miniature coaxial ClickLoc connector, standard cable
- Agency Approval: 00 is Not required
- The 3300 XL's SpringLoc terminal strips require no special installation tools and facilitate faster, more robust field wiring connections by eliminating screw-type clamping mechanisms that can loosen. You can order the 3300 XL 8 mm probes and extension cables with connector protectors already installed. We can also supply connector protectors separately for field installations (such as when an application must run the cable through restrictive conduit). We recommend connector protectors for all installations to provide increased environmental protection8.
Parameters
- Recommended Gap Setting for Radial Vibration: -9 Vdc [approximately 1.27 mm (50 mils)]
- Extension Cable Capacitance: 69.9 pF/m (21.3 pF/ft) typical
- Standard 9 meter System: Less than ±0.038 mm (±1.5 mil) with components at 0°C to +45°C (+32°F to +113°F).
- Standard 5 or 1 meter System: 7.87 V/mm (200 mV/mil) ± 5% including interchangeability error when measured in increments of 0.25 mm (10 mils) over the 80 mil linear range from 0°C to +45°C (+32°F to +113°F).
- Linear Range: 2 mm (80 mils). Linear range begins at approximately 0.25 mm (10 mils) from target and is from 0.25 to 2.3 mm (10 to 90 mils) (approximately –1 to –17 Vdc).
- The 3300 XL probe and extension cable also reflect improvements over previous designs. A patented TipLoc molding method provides a more robust bond between the probe tip and the probe body. The probe's cable incorporates a patented CableLoc design that provides 330 N (75 lbf) pull strength to more securely attach the probe cable and probe tip.
- Unless otherwise noted, the following specifications are for a 3300 XL 8 mm Proximitor Sensor, extension cable and 8 mm probe between +18˚C and +27˚C (+64˚F to +80˚F) at a maximum altitude of 2000 meters, with a -24 Vdc power supply, a 10 kΩ load, an AISI 4140 steel target, and a probe gapped at 1.27 mm (50 mils). Performance characteristics apply to systems that consist solely of 3300 XL 8 mm components. The system accuracy and interchangeability specifications do not apply to transducer systems that are calibrated to any target other than our AISI 4140 steel target.
(keywords: 330101-33-60-10-02-00;330101-33-60-10-02-00;pdf 330101-33-60-10-02-00;330101-33-60-10-02-00 datasheet)
More Models
| 125680-01 | 330180-X0-05 | 102244-22-50-01 | 135489-04 |
| 125840-02 | 330500-00-20 | 102618-01 | 135813-01 |
| 130944-01 | 330500-02-00 | 125388-01 | 136188-01 |
| 133819-01 | 3500/22M 288055-01 | 125388-01 125388-01H | 136294-01 |
| 135137-01 | 3500/32M 149986-02 | 125388-01H | 136483-01 |
| 136188-02 | 3500/33 149986-01 | 125704-01 | 136703-01 |
| 140471-01 | 3500/40M 140734-01 | 125720-01 | 136711-01 |
| 140482-01 | 3500/40M 176449-01 | 125720-02 | 136719-01 |
| 147663-01 | 3500/60 163179-01 | 125736-01 | 138708-01 |
| 149992-01 | 3500/62 163179-03 | 133396-01 | 140471-02 |
| 149992-02 | 3500/65 145988-02 | 133434-01 | 144181-50 |
| 170133-090-00 | 3500/72M 176449-08 | 133442-01 | 146031-01 |
| 172103-01 | 3500/94 145988-01 | 133827-01 | 146031-02 |
| 1900/65A 172323-01 | 102044-00-18-10-02 | 134652-01 | 16710-30 |
Is Bently Nevada 330101-33-60-10-02-00 not the part you are wanting?
Check out the rest of our website to see what else we have to offer!
Need Help?
Vicky
E-mail : sales7@apterpower.com
Mobile/Whatsapp : +8618030175807
Skype : live:2435aba439730baa
Hot Tags: bently nevada 330101-33-60-10-02-00 3300 xl 8 mm probe, bently nevada 330101-33-60-10-02-00 3300 xl 8 mm probe manufacturers, suppliers, bearings and seals replacement, bearing temperature monitoring, fiber optic sensors for industry, power factor correction, temperature monitoring device, industrial ventilation system
