Brief Introduction

Part Number: 330103-00-16-50-02-00
Type: Proximity Probes, Metric
Unthreaded Length Option: 0 millimeters
Overall Case Length Option: 160 millimeters
Total Length Option: 5.0 meters (16.4 feet)
Connector and Cable-Type Option: Miniature coaxial ClickLoc connector, standard cable
Agency Approval Option: Not required
The Bently Nevada 330103-00-16-50-02-00 probe also reflect improvements over previous designs. A patented TipLoc molding method provides a more robust bond between the probe tip and the probe body. The probe's cable incorporates a patented CableLoc design that provides 330 N (75 lbf) pull strength to more securely attach the probe cable and probe tip. You can also order 3300 XL 8 mm probes and extension cables with an optional FluidLoc cable option. This option prevents oil and other liquids from leaking out of the machine through the cable's interior.

About Feature

330103-00-16-50-02-00details2

1. The system provides an output voltage that is directly proportional to the distance between the probe tip and the observed conductive surface and can measure both static (position) and dynamic (vibration) values. The system's primary applications are vibration and position measurements on fluid-film bearing machines, as well as Keyphasor reference and speed measurements.

2. The Bently Nevada 330103-00-16-50-02-00 probe delivers the most advanced performance in our eddy current proximity transducer systems. The standard 3300 XL 8 mm 5-meter system also fully complies with the American Petroleum Institute's (API) 670 Standard for mechanical configuration, linear range, accuracy, and temperature stability. All 3300 XL 8 mm proximity transducer systems provide this level of performance and support complete interchangeability of probes, extension cables, and Proximitor sensors, eliminating the need to match or bench calibrate individual components.

3. An extended temperature range (ETR) probe and ETR extension cable are available for applications in which either the probe lead or extension cable may exceed the standard 177˚C (350˚F) temperature specification. The ETR probe has an extended temperature rating for up to 218˚C (425˚F). The ETR extension cable rating is up to 260˚C (500˚F). Both the ETR probe and cable are compatible with standard temperature probes and cables, for example, you can utilize an ETR probe with the 330130 extension cable. The ETR system uses the standard 3300 XL Proximitor Sensor. Note that when you use any ETR component as part of your system, the ETR component limits the system accuracy to the accuracy of the ETR system.

keywords: 330103-00-16-50-02-00; 330103-00-16-50-02-00; pdf 330103-00-16-50-02-00

About Installation

General installation steps (for reference only, please refer to the manual for specific operations):

Preparation:
Confirm that the probe model matches the device.
Prepare the required tools: wrench, screwdriver, etc.
Clean the installation surface.

Fix the probe:
Select a suitable installation location according to the manual.
Use fasteners such as bolts and nuts to fix the probe on the device.
Make sure the probe is at an appropriate distance from the object being measured.

Connect the cable:
Connect the signal cable of the probe to the corresponding device interface.
Pay attention to the direction of the cable to avoid interference.

Parameter setting:
Set the parameters of the probe according to the requirements of the device.
You can use the supporting software or instrument to set it.

Test and calibration:
After completing the installation, perform testing and calibration to ensure that the probe works properly.

Precautions:

Safety first: Be sure to pay attention to safety during installation to avoid electric shock or injury.
Environmental impact: Temperature, humidity, vibration and other factors in the installation environment may affect the performance of the probe.
Regular maintenance: Regularly check and maintain the probe to ensure its long-term stable operation.
Once again, the above information is for reference only. Please refer to the product manual and the guidance of professionals.

More Models

330103-00-15-10-02-CN	330425-02-CN	330101-00-53-05-02-05	330104-00-22-10-02-CN
330103-00-15-10-02-CN	190501-00-00-CN	330500-03-00	330104-00-04-10-02-CN
330103-00-06-05-12-05	330103-00-05-10-02-05	330101-00-12-10-02-05	330130-045-00-CN
21000-34-05-15-056-04-02	330930-045-00-05	330103-00-09-10-02-CN	330103-00-04-10-02-CN
330104-00-12-10-02-05	330903-00-04-05-02-CN	330103-00-11-10-02-CN	330103-02-04-10-02-05
330101-00-24-05-02-00	330903-00-06-05-02-05	330103-00-14-10-02-CN	330104-05-18-50-02-05
330903-00-04-05-02-00	330703-000-050-10-11-05	330103-00-05-10-02-CN	330104-00-05-05-11-05
106765-07	330104-15-25-10-02-00	330103-00-17-10-02-CN	16710-35
330102-00-16-10-02-00	330130-085-00-CN	330910-01-07-10-01-00	330130-030-00-00
330104-00-14-10-02-05	330101-00-20-10-02-05	330851-02-000-050-50-00-05	330500-04-01
330104-00-18-10-02-00	330101-00-18-05-02-05	21747-040-01	330930-065-01-00
330704-000-060-10-02-00	330101-00-16-05-02-05	330103-00-04-10-12-00	128987-130-00-00
330730-080-01-00	330101-00-20-10-01-05	330103-01-06-05-02-05	330905-00-25-05-01-05
330703-000-026-10-01-05	21504-00-16-10-02	330106-05-30-05-02-05	330930-060-01-05
330780-91-05	330104-15-25-10-02-05	330104-00-08-10-01-00	330705-02-18-10-02-05
330730-080-02-05	330104-00-10-10-02-05	330101-00-08-05-02-00	330180-50-00
330425-02-05	330901-02-24-10-01-00	330130-045-01-05	330180-90-CN
330850-50-00	330901-02-47-10-01-00	330106-05-30-10-02-05-05	330153-01
330906-02-12-05-02-05	330930-060-00-00	330101-12-30-10-02-05	330730-080-01-05
330930-045-00-00	330930-040-00-05	21747-085-00	21508-02-12-05-02