Brief Introduction
- Part Number: 330104-00-10-05-01-05
- Type: 3300 XL 8 mm Proximity Probes
- Unthreaded Length: 00 Millimeters
- Overall Case Length: 100 Millimeters
- Total Length: 0.5 meter (1.6 feet)
- Connector and Cable-Type: Miniature coaxial ClickLoc connector with connector protector, standard cable
- Agency Approval: CSA, ATEX, IECEx Approvals
About Installation
Understand the probe model
Before starting the installation, you must first have an in-depth understanding of the 330104-00-10-05-01-05 probe model. This model usually belongs to Bently Nevada's 3300 XL series and is a high-precision 8mm proximity probe.
Preparation before installation
Confirm the probe model and specifications: Check the compatibility of the probe model, specifications and equipment again.
Prepare tools: screwdriver, wrench, micrometer, level, etc.
Clean the installation surface: The installation surface must be clean, dry, and free of oil and impurities.
Safety measures: Pay attention to safety during installation, wear protective gloves, etc.
Installation steps
(1)Choose the installation location: Choose a suitable installation location based on the structure and vibration characteristics of the equipment. Generally speaking, the probe should be installed in a part with greater vibration, and the distance between the probe and the measured surface should be kept within the specified range.
(2)Fix the probe: Use a suitable fixing method to fix the probe in the installation position. Note that it should not be too tight when fixing to avoid damaging the probe.
(3)Adjust the probe direction: Adjust the direction of the probe so that it is perpendicular to the normal direction of the measured surface.
(4)Set the air gap: Use a measuring tool such as a micrometer to adjust the air gap between the probe and the measured surface to the specified range.
(5)Connect the cable: Connect the cable of the probe to the signal acquisition device and ensure that the connection is firm.
(6)Calibration: Calibrate the probe according to the manual of the equipment to ensure the accuracy of the measurement data.
keywords: 330104-00-10-05-01-05 ; Bently Nevada 330104-00-10-05-01-05 ; pdf 330104-00-10-05-01-05
More Parameters
1. Mixing XL and non-XL 3300-series 5 mm and 8 mm system components limits system performance to the specifications for the nonXL 3300 5 mm and 8 mm Transducer System.
2. The 3300-series 5 mm probe (refer to Document 141605) uses smaller physical packaging, but does not reduce the side view clearances or tip-to-tip spacing requirements as compared to an 8mm probe. It is used when physical (not electrical) constraints preclude the use of an 8 mm probe. When your application requires narrow side view probes, use the 3300 NSv Proximity Transducer System (refer to Document 147385).
3. 8 mm probes provide a thicker encapsulation of the probe coil in the molded PPS plastic probe tip. This results in a more rugged probe. The larger diameter of the probe body also provides a stronger, more robust case. We recommend that you use 8 mm probes when possible to provide optimal robustness against physical abuse.
4. Unless otherwise noted, the following specifications are for a 3300 XL 8 mm Proximitor Sensor, extension cable and 8 mm probe between +18˚C and +27˚C (+64˚F to +80˚F) at a maximum altitude of 2000 meters, with a -24 Vdc power supply, a 10 kΩ load, an AISI 4140 steel target, and a probe gapped at 1.27 mm (50 mils).
FAQ
Q: If goods can't work. is it possible to cancel the order and refund?
Q: if the goods can't work , you can send back to me . I will replace or refund .
Q: pls send me your company profile and catalog
Q: Are you Bently Nevada agent ?
Q: Can you send me DDP Minsk price ?
Is Bently Nevada 330104-00-10-05-01-05not the part you are wanting?
Check out the rest of our website to see what else we have to offer!
Vicky
E-mail : sales7@apterpower.com
Mobile/Whatsapp : +8618030175807
Skype : live:2435aba439730baa
Hot Tags: bently nevada 330104-00-10-05-01-05 3300 xl 8 mm proximity probes, bently nevada 330104-00-10-05-01-05 3300 xl 8 mm proximity probes manufacturers, suppliers, opc ua for industrial data exchange, dimensional measurement tools, maintenance scheduling software, rotor balancing service, temperature monitoring device, environmental monitoring in industry
