Long-Case 3300 XL 8 mm Probe for Metric Mounting
Bently Nevada 330104-10-23-10-01-00 is an M10 × 1 standard-mount 3300 XL 8 mm proximity probe with cable armor. The 230 mm metal case and 100 mm unthreaded section are critical to matching an existing probe holder and reaching the intended sensing position.
The ordered 1.0 m probe includes standard cable and a miniature ClickLoc coaxial connector with protector. Its approval option is 00 (not required).
Case Dimensions and Mounting Fit
Three different length measurements govern replacement. Confirm them separately against the installed probe or the machine's mounting drawing.
Extended probe body with coiled metal-armored lead.
Clearance around the probe holder
Verify the entry path, available adjustment, thread engagement and the final tip-to-target position. The extra case length does not make a shorter probe automatically interchangeable.
For M10 × 1 probes, the OEM requires unthreaded length A to be at least 20 mm shorter than case length B. This part meets that ordering restriction; actual installation fit must still be checked.
Exact Ordering Code and Cable Options
Each segment of 330104-10-23-10-01-00 determines a distinct part of the assembly.
| Segment | Ordering Parameter | Specified Option |
|---|---|---|
| 330104 | Probe type | 3300 XL 8 mm, M10 × 1, with armor |
| 10 (AA) | Unthreaded length A | 100 mm |
| 23 (BB) | Case length B | 230 mm |
| 10 (CC) | Total length C | 1.0 m (3.3 ft) |
| 01 (DD) | Cable / connector | Standard cable; miniature ClickLoc coaxial connector with protector |
| 00 (EE) | Agency approval | Not required |
Armored Cable and Connector Clearance
The metallic armor protects the probe lead mechanically. The DD=01 selection specifies standard cable and a ClickLoc connector with protector; it is not the FluidLoc cable option.
Check whether the armored section, ferrule and connector can pass through the existing cable path. Where space is restricted, verify the connection and service access before removing the old probe.
Probe tip and armored lead from another product view.
Comparison with a Short-Case 330104 Variant
The 330104 family includes other case lengths and connector choices. For example, the listed 330104-00-05-10-02-05 probe is a different mechanical and ordering configuration.
| Field | 330104-10-23-10-01-00 | 330104-00-05-10-02-05 |
|---|---|---|
| Unthreaded section | 100 mm | 0 mm |
| Case length | 230 mm | 50 mm |
| Total probe length | 1.0 m | 1.0 m |
| Connector option | 01 - with protector | 02 - without protector |
| Approval option | 00 - not required | 05 - CSA / ATEX / IECEx |
Neither version is a direct substitute solely because its thread and probe family match. Check mounting depth, connector requirements and approval needs independently.
Confirm the Existing Measurement System
A correctly configured 1.0 m 3300 XL 8 mm transducer system uses a matching 1.0 m Proximitor Sensor without an extension cable. Confirm the installed Proximitor part number and intended system length before changing the probe.
Record the probe's metal case length, unthreaded section, M10 × 1 holder and existing tip position.
Record the Proximitor Sensor model, cable connection and monitoring system configuration.
Check armored cable routing and access to the protected ClickLoc connector.
Confirm whether the installation requires a certified configuration rather than option 00.
OEM Reference and Related Components
For the metric 330104 ordering rules and standard-mount mechanical drawing, see Bently Nevada 3300 XL 8 mm Proximity Transducer System, Datasheet 141194 .
Frequently Asked Questions
Yes. A describes the unthreaded section and B describes the overall case length. They are related mechanical measurements, not two lengths to add together.
No. Verify the mounting depth, accessible thread engagement, adjustment range and tip-to-target position before choosing a long-case replacement.
No. The 330104 family specifies armor, while DD=01 specifies standard cable and a ClickLoc connector with protector. FluidLoc is a separate cable-type option.
Do not assume so. The case and unthreaded lengths are different, and connector and approval options can also differ. Match the original installation drawing and full ordering number.
Option 00 means approvals were not required in the OEM ordering selection. If your site requires an approved configuration, check the necessary certification and the exact product marking.
Request 330104-10-23-10-01-00
Send the existing installation details so we can review the exact part identification and confirm item-specific quotation terms.
- Full probe part number and revision
- Required quantity and condition
- Probe holder or machine drawing
- Installed Proximitor model
- Destination country
- Probe label and mounting photographs
Hot Tags: 330104-10-23-10-01-00, Bently Nevada 330104, 3300 XL 8 mm probe, M10 armored probe, 230 mm proximity probe, long case proximity probe, ClickLoc connector, temperature profile monitoring, shaft vibration analysis, shock absorbers, liquid penetrant testing, dust collection system, fault detection and diagnosis




