Bently Nevada 165855-11 Cylinder Pressure Transducer

Bently Nevada 165855-11 — 165855 armored 0 to 100 psia cylinder pressure transducer configuration.
✓ Original Product Verification✓ Ready Stock Check✓ Exact Model Review✓ 24-Hour Online Quotation
Send Inquiry
Description
BENTLY NEVADA PRODUCT INFORMATION

165855-11

Bently Nevada 165855-11 Cylinder Pressure Transducer

165855-11 identifies the 165855 cylinder-pressure family with pressure-range option 11: 0 to 6.8 bar (0 to 100 psia) and armored construction. The approval suffix is not included in the supplied identifier and is not assumed. Every value below is tied to this complete ordering code and is not copied from a similar suffix.

Confirmed Product Information

Manufacturer Bently Nevada, a Baker Hughes business
Transducer family 165855 cylinder pressure transducer for reciprocating-compressor condition monitoring
Pressure range option 11 0 to 6.8 bar (0 to 100 psia), with armor
Approval suffix Not specified in the supplied 165855-11 identifier; full orderable format is 165855-AA-BB
Mounting thread 7/8-14 UNF; designed to mate per SAE J1926
Frequency response 0 to 5500 Hz ±1 dB
Linearity, hysteresis and repeatability Within ±0.3% full scale
Output 10 ±0.3 Vdc full scale; 0.5 ±0.1 Vdc zero
Power requirement 18 to 30 Vdc, less than 15 mA
Operating temperature -40 to +85°C electronics housing; -40 to +150°C sensor head, subject to O-ring material
Recommended monitoring system 3500/77M Cylinder Pressure Monitor and System 1 software
Ingress design NEMA 4X and IP67 moisture-ingress design conditions

Applications

✓
Measuring cyclic absolute-pressure changes inside reciprocating-compressor cylinders.
✓
Cylinder-pressure monitoring with the 3500/77M monitor and System 1 asset-management software.
✓
Protected installations requiring the 0 to 100 psia armored range option.

Confirmed Compatibility And Installation Conditions

Confirm the missing approval suffix from the nameplate or purchase record before ordering; option 11 alone does not specify hazardous-area approval.
Use the SAE J1926 mating geometry and a compatible O-ring; an incorrect mating port may not seal pressure sufficiently.
The manufacturer strongly recommends an isolation valve, with valve, adapter and seal materials compatible with the process gas.
Enter the supplied pressure-temperature compensation data into the monitoring system to minimize temperature effects.
Protect the diaphragm from contact with foreign objects and secure the electronics housing near the compressor.

Lifecycle And Replacement Guidance

The 2025 manufacturer datasheet continues to list the 165855 family. It states no discontinuation date or universal replacement for the partial identifier 165855-11.

Frequently Asked Questions

What pressure range does 165855-11 identify?

Option 11 is the armored 0 to 6.8 bar (0 to 100 psia) cylinder-pressure range.

Is 165855-11 a complete orderable code?

No. The manufacturer format is 165855-AA-BB; the hazardous-area approval suffix must be confirmed from the nameplate or purchase record.

Which port geometry is required for 165855-11?

The transducer has a 7/8-14 UNF thread and is designed to mate per SAE J1926 for correct pressure sealing.

Which monitor is documented for 165855-11?

The manufacturer identifies the 3500/77M Cylinder Pressure Monitor and System 1 software for the complete cylinder-pressure system.

What process-compatibility checks apply to 165855-11?

Confirm the process gas against the C-276/316L wetted materials, selected O-ring, isolation valve and any adapter before installation.

Model Identification

Use the complete identifier 165855-11. Hyphen placement, zero padding and every suffix field are significant; compare the full nameplate and purchase record before ordering.

Manufacturer References

Bently Nevada 165855 Cylinder Pressure Transducer Datasheet, document 166815 Rev. M; Cylinder Pressure Transducer User Guide, document 166820.

Browse Bently Nevada products  |  Request a quote for this exact model

About PLC Leader

www.plcleader.com

PLC Leader works with system integrators, service teams and industrial end users who need clearly identified automation and machinery-protection spares.

Model identity, quantity, destination and technical verification requirements are checked so a similar-looking suffix is not quoted as the requested configuration.

Learn More About PLC LeaderSubmit an RFQ

PLC Leader team supporting 165855-11 industrial product sourcing

Recommended Models

These models are selected from reference lists supplied to PLC Leader and are shown for sourcing discovery only. They are not presented as direct replacements for the product described on this page. Confirm the complete manufacturer and part number before ordering.

EH-D28DRP EH-D6 QFA3100 INT-1564-L-5-M-114
GE 517-0147-06B-334107 8323/ID-NO.417727L TU516 / 1SAP212000R0001
MDX61B0450-503-4-0T NGP-1208 ProMinent S2CBH16090PVTS400U1110S0DE
HDL-MBUS01P.431 FF97/R DRN100L4/BE5/ASB8/TH/AK8W MCQUAY 718579
3RT1035-1AK64 14112‑09EN GT1155‑QSBD
DA2 RGBHV 60-488-01 15784 FIP CLIC 3V-2Z DIN-PWS50
FHX40,FHX40-S1B CH-DIM4 ESD PDD‑8PCI
TSXRKY4EX 501MA Nord SK 9032.1AZD-100L/4 BRE40
DIL0M-G HMIDT551 DDNI485
GHG5117306R0001 ic.1dr6640 DR6640-A 9066630T
VX1020 3912-20 GE 430223001 / T-200
E4 AC-12RC-1 WSU26/3-103A00 / 1047985 AT‑HD500
1734‑AENT AW-HHD100E H1161
PTL-8-430 CCH-CS FX03 LP‑FX03A11‑0C
UMG96L 8F3B08-1KUH3/125 140CPU11302
EVF8611-E 00395981 Siemens 6ES7592‑1AM00‑0XB0 559-3800
FHX40-11A LZV813 ABB 1SFL431001R8111 A95-30-11
MAD160C-0200-SA-M2-AP0-05-N1 DVC6200 GE54203X072G SXWDOC8XX10001
TXI1.OPEN QBE2003-P16 D-67722,MX-SM-N25-PW
Feb-00 B‑TL70‑Q5 Kfd0-rsh-1.4s.ps2

Hot Tags: bently nevada 165855-11 cylinder pressure transducer, bently nevada 165855-11 cylinder pressure transducer manufacturers, suppliers, alignment inspection equipment, augmented reality in maintenance, automation in maintenance, industrial enclosures, infrared thermography for industry, vibration isolation mounts

Disclaimer:

PLCleader sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.

PLCleader is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.