Bently Nevada Product Information
190501-09-00-04
Bently Nevada 190501-09-00-04 Velomitor CT Velocity Transducer
190501-09-00-04 is a Velomitor CT velocity transducer configuration for machinery casing-vibration measurement. The configuration details below are limited to information stated in the manufacturer documents reviewed for this page.
Confirmed Product Information
| Manufacturer | Bently Nevada, a Baker Hughes business |
|---|---|
| Product family | 190501 Velomitor CT Velocity Transducer |
| Mounting hardware option 09 | Plate stud, 3/8-24 to 1/4-inch NPT |
| Connection option 00 | MIL-C-5015 connection interface |
| Agency approval option 04 | Manufacturer approval group 01 through 04; confirm the installed nameplate and certificate for the jurisdiction |
| Sensitivity | 3.94 mV/mm/s (100 mV/in/s), ±5% |
| Frequency response | 3 to 900 Hz at ±1 dB; 1.5 Hz to 1 kHz at ±3 dB |
Applications
- Velocity measurement on rotating-machinery casings and bearing housings.
- Permanent machinery monitoring where the specified Velomitor CT electrical and mechanical interfaces are required.
Compatibility and Replacement Guidance
Use this exact ordering code when the mounting stud, MIL-C-5015 interface and approval option are required. No manufacturer document reviewed identifies another complete part number as a direct drop-in replacement.
Lifecycle Status
The reviewed manufacturer datasheet provides ordering information for this product family and does not state a discontinuation date or an exact successor for this complete ordering code. Confirm current availability and certification at RFQ stage.
Frequently Asked Questions
Is 190501-09-00-04 suitable for my casing-vibration measurement point?
190501-09-00-04 is specified for machinery casing and bearing-housing velocity measurement. Confirm that the monitoring channel accepts 100 mV/in/s sensitivity and that the required frequency range is within the manufacturer values shown above.
What mounting interface is required for 190501-09-00-04?
This configuration uses the option 09 plate stud, converting 3/8-24 to 1/4-inch NPT. Check the existing mounting point and available installation clearance before ordering.
Which electrical connection must be available for 190501-09-00-04?
The complete ordering code specifies the option 00 MIL-C-5015 connection interface. The mating cable and monitoring input must match that interface.
What approval information should be checked for 190501-09-00-04?
Approval option 04 belongs to the manufacturer approval group 01 through 04. Confirm the installed nameplate, certificate and local jurisdiction requirement before replacement.
Has 190501-09-00-04 been discontinued or assigned a direct successor?
The reviewed manufacturer datasheet does not state a discontinuation date or identify an exact direct successor for 190501-09-00-04. Confirm current availability and certification when requesting a quotation.
Model Identification
Use the complete ordering string 190501-09-00-04. Hyphen placement and zero padding are significant in Bently Nevada ordering codes. Compare the full nameplate and purchase record before ordering.
Manufacturer Reference
Bently Nevada datasheet 141636, 190501 Velomitor CT Transducer. Technical values and order-code descriptions on this page are based on that manufacturer document. External links are intentionally omitted.
Browse Bently Nevada products | Request a quote for this exact model
Recommended Models
These models are selected from reference lists supplied to PLC Leader and are shown for sourcing discovery only. They are not presented as direct replacements for the product described on this page. Confirm the complete manufacturer and part number before ordering.
| DR-15-24 | 9SUB/B/FRONT/Q | ABB CL-LAS.SD002 1SVR440713R0000 |
| XSWM2APU2NQ15 | A00000268 | R1-EC5621D0 |
| 1FT7084-5AF71-1CB1 | HeatSystems 33478 | PQ3541 |
| Beckhoff KL1104 | QD77MS2 MELSEC-Q | NFSB100-S00 |
| 140471-01 | ABB RXMVB2 RK 251 205-AN | EM-09 |
| A9-30-10 1SBL141001R8110 | TBS50 15855 | TPS-6L-FPA-T-NB |
| 3UL2304-1A | MTL4546C | BMXDDM16022 |
| DBC410A | QSNE-2DAL-D | WAGO 750-466 |
| SMI472-12 | CP1E-NA20DT1-D | SDB-Tn10-20-1 |
| F401 | DA1-34072FB-B55C 169395 | H4W4PER3V |
| Interel TCP4851-A1 | ABB 30.640.5 | HW100 |
| Belimo 22DTH-11M | HD-RX-201-CE | SND-L6083RP |
| CR4420-5 | IGT-905A | ABB 6127/02-84-500 |
| HZM / 315-034850-7 | M204.32 | KL4201X1-BA1 / 12P4986X052 |
| ABB 1SAJ242000R0001 PDP32.0 | 1761-NET-AIC | KFA6-SR2-Ex2.W 103373S |
| MTN6805-0008 | Siemens 1LA9164-2LA66-Z | DL50F/S176 |
| 01-9437RF.p12RF0.A0 | IS3016A | ABB AT/S 4.6.2 |
| 176F3423 | 571125022 I3J2L-0000 | EZMC36I |
| ASY0001241 | ABB 2CDG110130R0011 | 28876-56 |
| 110CXL4G5N0 | DI524 1SAP240000R0001 | 1FK7063-2AC71-1UH0 2KJ3511-5CA07-0HH2-Z |
Hot Tags: bently nevada 190501-09-00-04 velomitor ct velocity transducer, bently nevada 190501-09-00-04 velomitor ct velocity transducer manufacturers, suppliers, control cabinets, fault detection and diagnosis, mobile monitoring application, modbus protocol in industrial monitoring, non destructive testing equipment, optical comparator
