9200-01-01-10-00
Bently Nevada 9200-01-01-10-00 Seismoprobe Velocity Transducer
9200-01-01-10-00 is a two-wire moving-coil velocity transducer for 0° mounting, 4.5 Hz minimum operating frequency, top connector and M10 x 1 circular base. The confirmed fields below are kept separate from similar part numbers and are limited to the reviewed manufacturer documentation.
Confirmed Product Information
| Manufacturer | Bently Nevada, a Baker Hughes business |
| Product family | 9200 Seismoprobe Velocity Transducer |
| Measurement principle | Two-wire moving-coil velocity transducer; no external power required |
| Mounting angle option 01 | 0° ±2.5°, 4.5 Hz (270 cpm) minimum operating frequency |
| Connector option 01 | Top mount, no cable |
| Mounting base option 10 | Circular base with M10 x 1 stud |
| Agency approval option 00 | No approvals |
| Sensitivity | 20 mV/mm/s (500 mV/in/s), ±5% under the specified conditions |
| Operating and storage range | -29°C to +121°C (-20°F to +250°F) |
Applications And Installation Checks
Confirmed Compatibility Conditions
- Mount the sensor at the specified 0° orientation and verify the M10 x 1 circular base against the machine casing.
- Provide the separately selected mating cable for the top-mounted connector and terminate the two-wire output according to the monitor manual.
- The specified calibration load is 10 kohm and the manufacturer lists a maximum lead length of 305 m between the transducer and monitor.
Lifecycle And Replacement Guidance
Bently Nevada states that the Velomitor family generally provides improved performance and ruggedness for casing-velocity measurement. The reviewed document does not identify a universal drop-in Velomitor replacement for this complete configuration; mounting, sensitivity, power, wiring, frequency response and monitor input must be reviewed.
Frequently Asked Questions
Does 9200-01-01-10-00 require an external power supply?
No. The 9200 is a two-wire moving-coil transducer that generates its velocity-proportional output without external power.
Which mounting orientation is specified for 9200-01-01-10-00?
Option 01 specifies 0° ±2.5° orientation with a 4.5 Hz minimum operating frequency.
Is a cable included with 9200-01-01-10-00?
No. Connector option 01 is a top-mounted connector with no cable. Select the correct mating cable separately.
What machine mounting does 9200-01-01-10-00 use?
Mounting base option 10 specifies a circular base with an M10 x 1 stud.
Can a Velomitor transducer directly replace 9200-01-01-10-00?
The manufacturer describes the Velomitor family as generally offering improved performance and ruggedness, but does not identify a universal drop-in replacement for this exact code. Review the complete mechanical and electrical interface.
Model Identification
Use the complete identifier 9200-01-01-10-00. Hyphen placement, zero padding, XX positions and MOD references are significant. Similar-looking codes can identify different dimensions, probes, cable lengths, fittings or mounting threads, so quotations and replacements must be checked against the complete nameplate and manufacturer record.
Manufacturer References
Bently Nevada datasheet 141626 Rev. V, 9200 and 74712 Seismoprobe Velocity Transducers.
Browse Bently Nevada products | Request a quote for this exact model
About PLC Leader
PLC Leader is an independent industrial automation parts supplier based in China. We support maintenance teams, system integrators, distributors and industrial end users sourcing current, surplus, legacy and hard-to-find PLC, DCS, drive, safety and machinery-monitoring components.
Availability, product condition and order requirements are confirmed for each RFQ.
Recommended Models
These models are selected from reference lists supplied to PLC Leader and are shown for sourcing discovery only. They are not presented as direct replacements for the product described on this page. Confirm the complete manufacturer and part number before ordering.
| TTC5-12 | CPASC-M1H1M-P-2,5 | 800-001-2000 |
| PXI-5610 | WZ-1000-2 | TSXCFY21 |
| EPS1 520010 | 1FK7103-5AY71-1SY3-ZS81 | 430211006 T-525W |
| 1014K60-1739-01 | pscdm024dcban | ADV151-P13 |
| MOTOROLA RMN5111B | 3113A | TK-4003 |
| OB5011 | FH87/II2GD EDRE132S4BE11/3GD/TF/AL | 800033-340SE |
| 46940C-3 AA7941A | 2198-H025-ERS | MDX61B0370-503-4-00 |
| ANFGW-422A | MNX 45-80 CS94202 | VZ0008.BD4 |
| XP10BKB/DC XP10BKB | CAREL DPWC110000 | ETN 100-080-250 GG AA10GA30450 |
| Eastar Ve 2424 | SP200W | 62A04-1 |
| FRM-1 L01-0674-001 | 2CDG 110 072 R0011 | EXPI-4 |
| DL-230CPU D2-16ND3-2 D2-08CDR D2-12TR | 600 L25 0,5 | M300-VAD |
| LV426804 | 1756-0B16E | 4100-1246 |
| A1SY10EU | ABB ALCL-14-5 | 18-410051-001CC |
| DTP HDMI 4K 330 TX | S100-T | PK6520 |
| 7000-5201-1 | OA1G10 1SCA022353R4970 | 6AV2144-6QC10-0AL0 |
| TST8804 | 109838000 | HE693RTD600R |
| PM710MG | CEAS410754-01-01 HK50AA004 | EB401 EB401-10 |
| Kfd2-sr2-ex2.w 103368S | BMXAMI0410H | 5504RV20P |
| 1717-AMP | HS3P/22R-PPB13N00Z-SO952 | AT-HDVS-150-RX |
Hot Tags: bently nevada 9200-01-01-10-00 seismoprobe velocity transducer, bently nevada 9200-01-01-10-00 seismoprobe velocity transducer manufacturers, suppliers
