BENTLY NEVADA PRODUCT INFORMATION

24701-28-05-20-024-03-02

Name: Bently Nevada 24701-28-05-20-024-03-02 Proximity Probe Housing Assembly Manufacturers Suppliers - PLC Leader
Brand: PLC Leader
SKU: 320522776

Bently Nevada 24701-28-05-20-024-03-02 Proximity Probe Housing Assembly

24701-28-05-20-024-03-02 is a 24701 housing configured with 3300 xl 8 mm probe with selectable hazardous-area approvals, 0.5 m (20 in) probe cable, 2.0 in (51 mm), 2.4 in (approximately 61 mm) penetration, fitting option 03 and mounting-thread option 02. Every value below is tied to this complete ordering code and is not copied from a similar suffix.

Confirmed Product Information

Manufacturer	Bently Nevada, a Baker Hughes business
Housing family	24701 protective proximity probe housing assembly
Housing and sleeve material	303 stainless-steel housing body with a 304 stainless-steel sleeve
Probe option 28	3300 XL 8 mm probe with selectable hazardous-area approvals
Probe cable option 05	0.5 m (20 in)
Standoff option 20	2.0 in (51 mm)
Probe penetration option 024	2.4 in (approximately 61 mm)
Fittings option 03	One 3/4-14 NPT plug, one 3/4-14 to 1/2-14 NPT reducer, and a cable-seal grip with three grommet sizes
Mounting thread option 02	3/4-14 NPT
Typical assembly weight	Approximately 1.8 kg (4.0 lb), without fittings
Confirmed code scope	Every field shown is decoded from the current manufacturer ordering table

Applications

Protected mounting of a reverse-mount proximity probe through a machine case.

External probe-gap adjustment and probe replacement without opening the machine casing.

Radial vibration, axial position, Keyphasor and speed measurements when used with a complete matched 3300 XL 8 mm system.

Confirmed Compatibility And Installation Conditions

The standoff plus penetration dimension is 4.4 in; the manufacturer requires additional sleeve support only when this total is greater than 12 in (305 mm).

Standard 21000 and 24701 housings are not the CA explosion-proof versions; explosion-proof service requires the separately specified CA family.

Intrinsic-safety use requires an approved transducer system, the correct barriers and the applicable installation drawing.

Verify the 0.5 m (20 in) probe cable, 2.0 in (51 mm), 2.4 in (approximately 61 mm) penetration, fitting kit and mounting thread against the installed drawing.

Do not treat another 21000 or 24701 suffix as interchangeable unless every ordering field and the installed mechanical arrangement have been checked.

Lifecycle And Replacement Guidance

The current manufacturer datasheet lists the 24701 ordering family. It does not provide an exact discontinuation date or a universal direct replacement for 24701-28-05-20-024-03-02.

Frequently Asked Questions

Does 24701-28-05-20-024-03-02 require extra sleeve support?

Its standoff plus penetration total is 4.4 in. Added support is required only when the combined dimension is greater than 12 in (305 mm).

Which probe configuration is identified by 24701-28-05-20-024-03-02?

3300 XL 8 mm probe with selectable hazardous-area approvals, with a 0.5 m (20 in) integral cable.

Which fittings are supplied with 24701-28-05-20-024-03-02?

One 3/4-14 NPT plug, one 3/4-14 to 1/2-14 NPT reducer, and a cable-seal grip with three grommet sizes.

Is 24701-28-05-20-024-03-02 an explosion-proof CA housing?

No. This is the standard 24701 family code, not the separate CA24701 explosion-proof family.

Is a direct replacement confirmed for 24701-28-05-20-024-03-02?

No universal direct substitute is stated in the reviewed manufacturer document. Confirm the full code, machine drawing, probe system, approvals and installation dimensions.

Model Identification

Use the complete identifier 24701-28-05-20-024-03-02. Hyphen placement, zero padding and every suffix field are significant; compare the full nameplate and purchase record before ordering.

Manufacturer References

Bently Nevada 21000 and 24701 Proximity Probe Housing Assemblies Datasheet, document 141600; 3300 XL 8 mm Proximity Transducer System Datasheet, document 141194.

Browse Bently Nevada products | Request a quote for this exact model

About PLC Leader

www.plcleader.com

PLC Leader supports maintenance teams and project engineers sourcing industrial control and machinery-monitoring parts. Our review starts with the exact manufacturer identifier and the installed-system context.

Each inquiry is checked for product condition, quantity, documentation needs and delivery requirements before a quotation is prepared.

Learn More About PLC Leader Submit an RFQ

PLC Leader team supporting 24701-28-05-20-024-03-02 industrial product sourcing

Recommended Models

These models are selected from reference lists supplied to PLC Leader and are shown for sourcing discovery only. They are not presented as direct replacements for the product described on this page. Confirm the complete manufacturer and part number before ordering.

Honeywell EMPS-50,0-010-144-01	PTXE6A-M	S4-34741-01
VLC-12CH-10A	X20DI9371	1PH6163-4CF06-ZZ:K09
972LX IS23DI0XCD000	3RH2911‑1FA22	Honeywell XS824-25
CR1-RJ	800-40404-01 T1-1M	M2000
CP1L-M30DT1-D	ABB ACN684-1405-50	M2PBMPP
TL 500	QUINT-PS/1AC	SEW KA127B DRL160M4BE20/TF/EG7S
IPM430B-M	ACS800-04-0120-3+E202+K454+L503+P901	15B10867G1
120B1010	2BH1900-7AH06	WV-V1330LK
1C31234G01	XFL824A	4541AS
HD‑MD4X1‑4K‑E	CARLO GAVAZZI EMBCT23	LFR-D-7-MAXI ND43
iEM3235	FPG-C32T FPO-E16T	L5TDF-PS
TA200DU‑175 1SAZ421201R1005	PXA30-K11	ICP-EZM2 ICP-EZV2-ENF
889D‑F4AC‑2	TM3DM24RG	131227-1 130330-1
ABB RMBA-01	E-150,979099-000	BXD400A-S
CP2297 1100‑988‑1	KG1 X10	Allen‑Bradley 1734‑AENT
TA80DU-52 1SAZ331201R1004	ADV151-P13	AAR145-S00
POL965.00/STD s55663-j650-a100	Cisco 07‑1144‑01	NS-ATA7002-0
ABB DC532	NBB20‑L2‑A2‑V1	FC-302P37KT7P66H4BGCXXXSXXXXALBXCXXXXD0,137H1136
Yokogawa NFTI3S‑10 S2	PS236	ABB 2CDG110072R0011
QUINT-ORING/24DC/2x20/1x40 PN:2320186	Cisco TPSN-50AB	ECT-16-0045

Hot Tags: bently nevada 24701-28-05-20-024-03-02 proximity probe housing assembly, bently nevada 24701-28-05-20-024-03-02 proximity probe housing assembly manufacturers, suppliers