BENTLY NEVADA PRODUCT INFORMATION

24701-28-05-20-040-03-02

Name: Bently Nevada 24701-28-05-20-040-03-02 Proximity Probe Housing Assembly Manufacturers Suppliers - PLC Leader
Brand: PLC Leader
SKU: 320522743

Bently Nevada 24701-28-05-20-040-03-02 Proximity Probe Housing Assembly

24701-28-05-20-040-03-02 is a 24701 housing configured with 3300 xl 8 mm probe with selectable hazardous-area approvals, 0.5 m (20 in) probe cable, 2.0 in (51 mm), 4.0 in (approximately 102 mm) penetration, fitting option 03 and mounting-thread option 02. Every value below is tied to this complete ordering code and is not copied from a similar suffix.

Confirmed Product Information

Manufacturer	Bently Nevada, a Baker Hughes business
Housing family	24701 protective proximity probe housing assembly
Housing and sleeve material	303 stainless-steel housing body with a 304 stainless-steel sleeve
Probe option 28	3300 XL 8 mm probe with selectable hazardous-area approvals
Probe cable option 05	0.5 m (20 in)
Standoff option 20	2.0 in (51 mm)
Probe penetration option 040	4.0 in (approximately 102 mm)
Fittings option 03	One 3/4-14 NPT plug, one 3/4-14 to 1/2-14 NPT reducer, and a cable-seal grip with three grommet sizes
Mounting thread option 02	3/4-14 NPT
Typical assembly weight	Approximately 1.8 kg (4.0 lb), without fittings
Confirmed code scope	Every field shown is decoded from the current manufacturer ordering table

Applications

✓

Protected mounting of a reverse-mount proximity probe through a machine case.

✓

External probe-gap adjustment and probe replacement without opening the machine casing.

✓

Radial vibration, axial position, Keyphasor and speed measurements when used with a complete matched 3300 XL 8 mm system.

Confirmed Compatibility And Installation Conditions

The standoff plus penetration dimension is 6.0 in; the manufacturer requires additional sleeve support only when this total is greater than 12 in (305 mm).

Standard 21000 and 24701 housings are not the CA explosion-proof versions; explosion-proof service requires the separately specified CA family.

Intrinsic-safety use requires an approved transducer system, the correct barriers and the applicable installation drawing.

Verify the 0.5 m (20 in) probe cable, 2.0 in (51 mm), 4.0 in (approximately 102 mm) penetration, fitting kit and mounting thread against the installed drawing.

Do not treat another 21000 or 24701 suffix as interchangeable unless every ordering field and the installed mechanical arrangement have been checked.

Lifecycle And Replacement Guidance

The current manufacturer datasheet lists the 24701 ordering family. It does not provide an exact discontinuation date or a universal direct replacement for 24701-28-05-20-040-03-02.

Frequently Asked Questions

Does 24701-28-05-20-040-03-02 require extra sleeve support?

Its standoff plus penetration total is 6.0 in. Added support is required only when the combined dimension is greater than 12 in (305 mm).

Which probe configuration is identified by 24701-28-05-20-040-03-02?

3300 XL 8 mm probe with selectable hazardous-area approvals, with a 0.5 m (20 in) integral cable.

Which fittings are supplied with 24701-28-05-20-040-03-02?

One 3/4-14 NPT plug, one 3/4-14 to 1/2-14 NPT reducer, and a cable-seal grip with three grommet sizes.

Is 24701-28-05-20-040-03-02 an explosion-proof CA housing?

No. This is the standard 24701 family code, not the separate CA24701 explosion-proof family.

Is a direct replacement confirmed for 24701-28-05-20-040-03-02?

No universal direct substitute is stated in the reviewed manufacturer document. Confirm the full code, machine drawing, probe system, approvals and installation dimensions.

Model Identification

Use the complete identifier 24701-28-05-20-040-03-02. Hyphen placement, zero padding and every suffix field are significant; compare the full nameplate and purchase record before ordering.

Manufacturer References

Bently Nevada 21000 and 24701 Proximity Probe Housing Assemblies Datasheet, document 141600; 3300 XL 8 mm Proximity Transducer System Datasheet, document 141194.

Browse Bently Nevada products | Request a quote for this exact model

About PLC Leader

www.plcleader.com

PLC Leader works with system integrators, distributors and industrial end users who need traceable automation and machinery-protection spare parts.

We review exact model identity, quantity, destination and technical verification needs so the quotation reflects the requested configuration rather than a similar suffix.

Learn More About PLC Leader Submit an RFQ

PLC Leader team supporting 24701-28-05-20-040-03-02 industrial product sourcing

Recommended Models

These models are selected from reference lists supplied to PLC Leader and are shown for sourcing discovery only. They are not presented as direct replacements for the product described on this page. Confirm the complete manufacturer and part number before ordering.

QSE-IO	RM805024 RM900211	QFM2160
ABB GJR2237600R1 DT370A 9093/019	PR 4114	Siemens 6SL3710-7LE35-0AA3-Z
KX‑T30866	BIP-1300	CPP40
U1174A	KHA7‑IPS	DO572 1TNE968902R2203
RKC4.221T-30/TEB	Honeywell HCC‑690NA‑E	371-03694-000
DIN-8SW8	LV429386	903282
750-431	HR1S‑AF5130PB	GV2ME16
G-30 RS485	1732E-IB16M12	MMC-QR030024-02LD00A
176F3423	VILTRUS M-BUS-RS232	L01‑0679‑001
ACS604-0170-6+V991 42001835	LR2D1321	TBS100
PXC52	CD-3870U-B	3HE15377AARA01 ROHS6/6-40/85C INUIAG2HAA
QL-PS1202	effector200 OG 5121 OG5121	250044‑VBA‑20M
X4FS190/HU/B	KFA6-SR2-Ex2.W 103373S	SOV680135
ABB AF65-30-11-13 1SBL387001R1311	737 839-001 G00	DLH1000S
CT45P-X0N-37D100G	PW9001	13070-250
AT-HDVS-150-TX	NL100/250-7.5-4-12	XD26 MILLENIUM3
Wenglor OPT104	V28410A-1101100	AC010S
AI562 1TNE968902R1102	ABB 221 052-AH	GE DP65
330101-00-16-10-02-05	025-29583-001	U9500B2002006265-002
TRIO-PS-2G/1AC/24DC/10	MN50-LCD	BANNER B‑TL70‑Q5 92226

Hot Tags: bently nevada 24701-28-05-20-040-03-02 proximity probe housing assembly, bently nevada 24701-28-05-20-040-03-02 proximity probe housing assembly manufacturers, suppliers