GE Fanuc IC200CPUE05 CPU Module

 

Description

IC200CPUE05 shares the basic features of the other VersaMax*PLC CPUs. It provides powerful PLC functionality in a small,versatile system. CPUE05 can serve as the system controller for upto 64 modules with up to 2048 I/O points. Two serial ports provide RS-232 and RS-485 interfaces for serial communications. CPUE05 also provides a built-in Ethernet Interface. The RS-232 serial portcan be configured for Local Station manager operation to provideaccess to diagnostic information about the Ethernet interface.CPUE05 has 128KB of configurable memory.

⇒ Contact Us: sales7@apterpower.com // Whatsapp: +8618030175807 // Skype: live:2435aba439730baa

The IC200CPUE05 is a CPU designed by GE for the VersaMax series. The IC200CPUE05 has a built-in interface, which allows it to serve as the system controller for a maximum of 64 modules with up to 2048 I/O points.

The IC200CPUE05 has two serial ports that are software configured for SNP and RTU slave, Serial I/O operation, and for Local Station Manager operation (Port 1 only). When either port is being used for RTU, an automatic switch to SNP slave mode is required. If the IC200CPUEO5 is in Stop mode and the CPU is configured for Serial I/O, a port will automatically return to SNP slave. Port 2 to can offer power to an external device if power requirement is 100 mA or less at 5VDC. Port 1 is an RS-232 port with a 9-pin female connector. If Port 1 is configured for CPU use, it can be forced by using the Ethernet Restart pushbutton. Port 1 will stay in its current mode until PLC is power cycled or the Ethernet Restart pushbutton has been pressed. Port 2 is an R3-485 port with a female D-sub connector that has 15-pins. The port can be used for program, configuration, and updates and can be attached directly to an RS-485/RS-232 adapter.

The built-in Ethernet interface of the IC200CPUE05 makes communication on a 10BaseT network possible. The IC200CPUE05 is compatible for half and full-duplex operation, usually without any user configuration due to the automatic sensing of the CPU. Accessing CPU data from a host computer or other GE Fanuc PLCs can be processed due to this built-in interface feature.

To meet EN 55011 and FCC Class A radiated emissions, the Control system in which the IC695PNC001 module is usedshall be mounted in a metal enclosure when three or more IC695PNC001 modules are used. All surfaces of theenclosure must be adequately grounded to adjacent surfaces to provide electrical conductivity. Wiring external to theenclosure must be routed in metal conduit or the equivalent. The conduit must be mounted to the enclosure usingstandard procedures and hardware to ensure electrical conductivity between the enclosure and conduit.When installing, operating, or maintaining the IC695PNC001, personnel must insure any electrostatic charge isdischarged through the use of a grounded ESD strap or other means.

keywords: ge ic200cpue05;ic200cpue05;IC200CPUE05 pdf;IC200CPUE05 datasheet;manual IC200CPUE05;IC200CPUE05 sell

Is GE Fanuc IC200CPUE05 not the part you are wanting?

Check out the rest of our website to see what else we have to offer!