GE Fanuc IC200GBI001 Genius Network Interface Unit

 

Description

The IC200GBI001 is a Genius Network Interface Unit produced by GE Fanuc as part of the VersaMax series. This device performs control functions for the various connected input and output modules. Assuming the proper firmware version is installed, this network interface unit is compatible with various modules including Series 90-70 programmable logic controllers, Genius Bus Controllers, and PacSystems RX7i and Rx3i programmable logic controllers. Additionally, any computer with the ability to control the bus can be designated as the host computer.

⇒ Contact Us: sales7@apterpower.com // Whatsapp: +8618030175807 // Skype: live:2435aba439730baa

The IC200GBI001 is a VersaMax communication module. This module is a Genius Network Interface Unit, allowing VersaMax I/O modules to be installed in distributed I/O architecture. This module is designed to host up to Eight (8) I/O module per rack and supports installation of up to Eight (8) racks, for a maximum number of 64 I/O module support. It supports transmission speed of 153.6 kbaud for extended network configuration; 153.6 kbaud, 76.8 Kbaud and 38.4 Kbaud for standard configuration, The IC200GBI001 can accommodate a high number of I/O points, specifically, up to 1024 points for Discrete Inputs; 1024 Discrete outputs; 128 bytes of analog analog input memory and 128 bytes of analog output memory. This module can manage scanning of 128 bytes of network input per scan and 128 bites of output per scan. It has power consumption of 250 mA @ 4VDC and 10 mA @ 3.3 mA. The IC200GBI001 is compatible for use with a variety of controller systems as Genius protocol is supported by previous and modern controller platforms. Compatible control systems include Series 90-70 and PACSystem RX7i and PACSystem RX3i. Appropriate firmware revisions must be loaded to both the controller and the IC200GBI001 Genius Network Interface Module. The IC200GBI001 is provided with dual Genius connection terminals. The upper terminal serves as the primary Genius connection point while the lower terminal serves as the redundant port. These ports are designed for connecting in Daisy chain topology, installed with a terminating resistor at both ends of the communication cable. Appropriate resistor values are 75, 100, 120, or 150-ohm across terminals Serial 1 and 2.

What is the maximum number of I/O modules supported by this interface module?

The IC200GBI001 supports up to 64 I/O modules, specifically, Eight (8) modules installed to maximum of Eight (8) expansion racks.

What are the configurable transmission rates supported by the IC200GBI001?

The IC200GBI001 supports 153.6 kbaud for extended network configuration; 153.6 kbaud, 76.8 Kbaud and 38.4 Kbaud for standard configuration.

What are compatible control systems to the IC200GBI001?

The IC200GBI001 is compatible with Series 90-70 and PACSystem RX7i and PACSystem RX3i.

keywords: ic200gbi001;GE Fanuc IC200GBI001;IC200GBI001 pdf;IC200GBI001 datasheet;manual IC200GBI001;IC200GBI001 sell

Is GE Fanuc IC200GBI001 not the part you are wanting?

Check out the rest of our website to see what else we have to offer!