GE Fanuc IC694MDL940 Relay Output Module

Product Introduction

The IC694MDL940 is a PACSystem RX3i Discrete output module formerly manufactured by GE Fanuc, now under Emerson Automation. This module features Sixteen (16) Normally Open (N.O.) contacts grouped into Four (4) with Four (4) outputs each group. Each contact output can be operated with 5-30 VDC with nominal voltages of 24 VDC; 5 - 250VAC at frequency of 47 to 63 Hz, with nominal input voltages of 120/240VAC. Each channel is designed for maximum loads of 2 Amps pilot duty, maximum per output and 4 Amps maximum per common. This module has current draw of 7 mA with all outputs on from 5 volt bus on backplane and 135 mA with all outputs on from relay 24V bus on backplane.

The IC694MDL940 is a Sixteen (16) point Relay output module from the PACSystem RX3i series of Emerson Automation, formerly manufactured by GE Intelligent Platforms (GE IP). This module has a single-slot width, occupying single slot of the backplane and comes with Four (4) groups of outputs with each group having Four (4) relay outputs each. The IC694MDL940 relay contacts are Normally Open (N.O.) contacts or Form A contacts. Each output contact are rated for a maximum load of 2 Amperes pilot duty, maximum per output while each output group designed to deliver maximum output current of 4 Amperes. Additionally, the module's minimum load is 10 mA and maximum inrush current of 5 Amperes. Each relay output channels has response time of 15 ms, maximum for both signal transitions and the module's power consumption is 7 mA @ 5VDC bus voltage and 135 mA from relay 24V bus on backplane. These power consumption ratings are based with all output channels energized. The IC694MDL940 comes with Sixteen (16) status LED indicators, each representing the individual channels. An energized LED represent an energized output while a de-energized LED represent otherwise. This module does not come with an internally installed fuse for channel protection therefore, users may want to install external fuses to protect the module. The IC694MDL940 comes with 250 VAC continuous and 1500 VAC for 1 minute isolation rating, from field to backplane and frame to ground while the channel to channel isolation is 250 VAC continuous; 1500 VAC for 1 minute.

Related words：ic694mdl940;GE IC694MDL940;IC694MDL940 pdf;IC694MDL940 datasheet;IC694MDL940 manual;IC694MDL940 sell;IC694MDL940 GE

PLC Leader maintains strong, established partnerships with over 100 manufacturers worldwide, including leading industrial suppliers. Our extensive inventory encompasses a wide range of automation and control equipment, including (but not limited to):

• DCS Components (Distributed Control System)
• Programmable Logic Controller (PLC) Systems
• Variable Frequency Drives (VFDs)
• Servo Drives
• Variable Speed Drives (VSDs)
• DC Drives
• General Automation Spare Parts
• Human-Machine Interfaces (HMIs)

Is GE IC694MDL940 not the part you are wanting?

Check out the rest of our website to see what else we have to offer!

Telephone: +8618030175807     Email: sales7@apterpower.com