
IC697CHS790 - Rear Mount / GE Fanuc 9-Slot Rear Mount
The IC697CHS790 is a 9-slot Rear Mount for IC697 programmable controller used for CPU and I/O configurations. There is capability for one power supply for the standard 9-slot rack located at the leftmost module position. The IC697CHS790 rack mounts in a 10 inch deep enclosure where fans are not normally required. The rack's dimensions are 11.15" H x 19" W x 7.5" D with controller slot width being 1.6" W and the width of the supply slot at 2.4" W. Each rack offers a slot sensing for rack-type I/O created for the IC697 PLC. No switches or jumpers on the I/O modules are needed.
IC697CHS790 Specification

Module Type: Standard Rack
Mounting Location: Rear(panel)
Number of Slots: 9 (plus power supply)
Type: Double width
Dimensions: 11.15 x 19.00 x 7.5 in. (H x W x D)
Internal Power Used: 20 amps @ 5 VDC
IC697CHS790 is a rear mount developed by GE. It is a part of Mark I and II control system. It is a 9-slot rear mount rack developed by GE for IC697 programmable controllers, commonly used in Mark I and II control systems. This rack facilitates CPU and I/O module configurations, providing essential infrastructure for complex control applications.
What is IC697CHS790?
It is a Rear Mount developed by GE.
How is the rack mounted?
The rack can be mounted in either a front or rear orientation, depending on your system configuration. It is designed to fit into enclosures with a depth of 10 inches (254 mm), and adequate clearance of approximately 6 inches is required on the left side for power connector access. Mounting flanges are factory-installed in the rack's side panels to simplify the installation process.
Can two racks share a power supply?
Supports dual-rack operation from a single power supply. If the secondary rack's power needs do not exceed 5.2 amperes for +5V power, both racks can be powered by a single supply. A Power Supply Extension Cable is available to connect the two racks, including the necessary power and sequencing signals for proper system operation.
Advantage GE series for option
- Fanuc CNC: A06B-0104-B111#7000
- GE 90-30 Series PLC: IC693CPU364 , IC693MDL330 , IC693PWR330 , IC693CPU374,
- GE 90-70 Series PLC: IC697ALG321 , IC697CMM741 , IC697CPU782 , IC697PWR711,
- GE Genius I/O: IC660BBD025 , IC660CBB902 , IC660EBS103, IC660ELB912G
- GE Mark VIe: IS215UCVEH2A , IS200EPCTG1A , IS200TRPGH2B , IS200DSPXH1D
- GE Multilin: VMIVME-7750-746000 , PQMII-T20-C-A , SR469 469-P5-HI-A20,
- GE PACSystems RX3i: IC695CPU315 , IC695CHS007 , IC695ACC402 , IC694MDL753B
- GE PACSystems RX7i: IC698CRE030 , IC698CPE020 , IC698PSA100 , IC698CPE010
- GE QuickPanel: QPI-3D200-S2P , QPI-3D200-E2P , QPI-31200-C2P
- GE Series One: IC610MDL116B , IC610CCM111A , IC610CPU105B
Who is PLC leader
We are a leading provider of innovative automation solutions, committed to enhancing industrial efficiency, productivity, and safety. With an extensive inventory of high-quality products, we ensure immediate availability and quick delivery to meet the diverse needs of our customers across various industries.
Is GE IC697CHS790 not the part you are wanting?
Check out the rest of our website to see what else we have to offer!
We accept inquiries 24 hours a day and send them to sales7@apterpower.com





